Converters.TV 707 User manual
Introduction
HDMI Switch Selectoris a high performance HDMI switcher with remote control. It
allows your various HDMI sources to share one HDTV display. Simply press a
button to select your desired HDMI source to be displayed on the HDTV.
Features
1. HDMI 1. , HDCP 1.1 and DVI 1.0 compliant.
2. Signal Enhancement feature allows you to improve signal quality after long
distance transmission.
. LED indicators.
4. Ideal for home theater integrations: * Supports input/output resolution:
pc: VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200) & WUXGA (1920x1200)
HDTV: 480i 576i 480p, 576p, 720p, 1080i and 1080p
5. Remote control & RS2 2 operation.
6. Easy to install and to operate.
Operating Functions
and
Controls
Front Panel
1. Remote control sensor.
2.HDMI inputs: Connect your various HDMI sources to each of the HDMI input of the
unit using HDMI cables.
3.Input select/Indicators: Press the " INPUT" button repeatedly to switch to your
desired input source and the LED will illuminate to indicate which input source is
being selected.
4.Signal Enhancement/Indicator: Press the " Signal Enhance" button to turn
on this feature to improve signal quality after long distance transmission. Press
again to turn off. The LED will illuminate when the signal is enhanced.
5. Power ED Indicator: The LED will illuminate when the power is connected.
Rear Panel
1. HDMI output: Connect the HDMI output to the HDMI input of
your display using HDMI cable.
2. HDMI inputs: Connect your various HDMI sources to each of the HDMI input
of the unit using HDMI cables.
3. Power: Plug the supplied 5VDC power supply into the unit.
4. R 232: 9-pin D-sub female connector for connecting to your other control
console for remote control.
Remote Control
1. Power: Press the button to turn on/off the unit.
2. Direct input selector: Press numerical number
button to select your desired input source.
3. Void buttons (No function).: If the button number
is greater than the total input number of the unit then
the button is of no function.
Remote Control Protocol
Pins definition of modem cable
Splitter Remote Controller
PIN Definition PIN Definition
1 NC 1 NC
2 TxD 2 RxD
RxD TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 'NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
RS-2 2 transmission format: Baud Rate : 9600 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit
RS-2 2 command
* The command is combined with a characters and digits.
*This combination command code has to be separated by ASCII character SPACE *The
command will be executed after ASCII character "CR" input
* After ASCII character "CR" is entered, if the command is legal the unit will reply "OK" message
* If the command is illegal, The unit will reply "NG" message
Command Code Comment
PORT 1 PORT 1 ON
PORT 2 PORT 2 ON
PORT PORT ON
PORT 4 PORT 4 ON
PORT 5 PORT 5 ON
PORT 6 PORT 6 ON
PORT 7 PORT 7 ON
PORT 8 PORT 8 ON
SIGNAL 1 ENABLE SIGNAL ENHANCE
SIGNAL 0 DISABLE SIGNAL ENHANCE
POWER 1 POWER ON
POWER 0 POWER OFF
Installation
Specifications
-Frequency Band Widt : 2.25 Gbps (single link)
Inputs: 8 HDMI female port (Type A
connector)
Output: 1 HDMI female port (Type A
connector)
-Power Supply: 5V DC
Weig t(g): 850
-Dimensions(mm): 280(W) 104(L) 44(H)
-Silkscreen Color: Black
-Operating Temperature: 0°C-40°C
Table of contents
Other Converters.TV Recording Equipment manuals
