CooKing Vintage Cuisine CM-9400C User manual

CM-9400M, CM-9400C
Instruction manual
COFFEE MACHINE WITH FROTHING NOZZLE
(is instruction manual covers various color versions of the device)

2
Vintage Cuisine by CooKing®is a collection of kitchen
appliances and accessories combining traditional
design and quality with modern technology. Vintage
Cuisine by CooKing® products are created to bring joy
to your kitchen and work hard for you. Check for other
Vintage Cuisine by CooKing® products in stores.
Visit us at www.vintagecuisine.com
cook with love

3
table of contents
I Intended use
II Technical data
e device is intended for brewing coee and frothing milk.
is device is not intended for use in industrial conditions or for
commercial purposes.
Following the instructions in this manual will ensure safe installa-
tion and use of the device.
e device is intended for private household use only.
Model CM-9400M, CM-9400C
Power supply 220–240 V~ 50/60 Hz
Power 1350 W
Water container capacity 1500 ml
Generated pressure 15 bar
I Intended use..................................3
II Technical data ...............................3
III Safety instructions ...........................4
IV Explanation of symbols...................... 8
V Overview .................................... 9
VI Package contents ............................11
VII Use...........................................11
VIII Cleaning and care ...........................17
IX Repair .......................................18
X Storage and transport ......................20
XI Disposal ....................................20
XII CE Declaration ..............................21
XIII Warranty ...................................22

4
III Safety instructions
1. e device may be operated by chil-
dren 8 years of age or older, provid-
ed they are supervised or instructed
in the use of the device in a safe way
and understand the hazards involved.
Cleaning and maintenance may not
be performed by children unless they
are older than 8 and are supervised.
Keep the device and its power cord
out of the reach of children under 8
years of age.
2. e device may be used by individ-
uals with reduced physical, sensory
or mental capabilities or by individ-
uals lacking the necessary experience
and knowledge, provided that they
are supervised or use the device safe-
ly, in compliance with the instruction
manual, and understand the hazards
involved.

5
3. Children must not play with the de-
vice.
4. Do not immerse the device in water
when cleaning it.
5. Warning! Hot surface! Risk of
burns! During use, some of
the outer surfaces of the coee ma-
chine may become very hot. Do not
touch hot surfaces and watch out for
steam escaping from the device.
When brewing coee of frothing
milk, only touch the dedicated porta-
lter handles or the milk frothing
nozzle handle.
6. Do not add coee beans when the
coee machine is in operation.
7. When cleaning the parts that come
into contact with food, follow the sec-
tion 8 Cleaning and care.
8. Warning! Make sure no water or

6
other liquid is poured over the power
cord connection with the device.
9. Warning! ere is a risk of damage
to the device if it is not used in ac-
cordance with its intended use.
10. e device heating surfaces remain
hot immediately aer use.
11. If the power cord becomes damaged,
have it replaced by the manufacturer,
service representative or an appropri-
ately qualied person to avoid hazard.
12. Detailed instructions concerning
the safe operation of the device can
be found in the following section of
this manual.
13. e device is intended for indoor
use only. It may not be used for pro-
fessional purposes. Do not use the
device for any purpose other than its
intended use.
14. Read this manual in whole before using the product.

7
15. When using electric appliances and devices, especially in the pres-
ence of children, basic safety precautions should be observed in or-
der to avoid the risk of re or electric shock.
16. Do not immerse the power cord, its plug or the device itself in wa-
ter or any other liquid, so as to avoid electric shock.
17. Do not use the device with an extension cord. If, however, you are
prepared to accept responsibility for doing so, use an extension cord
in good condition that is adequately grounded and matches the de-
vice’s electric current rating.
18. Do not hang the power cord over a table or sink edge.
19. e power cord should not hang freely or touch any hot surface.
20. Do not use the device in the vicinity of ammable fabrics (curtains,
carpets), do not position it next to sources of high temperature: gas
heaters, electric cookers.
21. Before using the device, ensure that the mains voltage matches the
voltage specied on the device label.
22. Extend the power cord before using the device.
23. Always disconnect the device from the power source when you are
not using it. Also, disconnect the device prior to cleaning, assembly
and disassembly. Do not approach any moving parts during oper-
ation.
24. Do not cover the device during operation. Otherwise (if the device
is covered or touches a ammable material) there is a risk of re.
25. e device must be supervised at all times when connected to the
mains.
26. Do not operate the device if it has fallen from a great height or
shows any sign of damage.
27. Do not attempt to open the housing or disassemble any part of the
device.
28. Use only the accessories supplied by the manufacturer.

8
29. Keep this manual and, if possible, the package.
IV Explanation of symbols
Read the manual.
e product is compliant with the requirements
of the applicable EU directives.
Instructions for the disposal of electric and elec-
tronic devices: see the DISPOSAL section.
Disconnect the device from the power source.
Product suitable for food contact.
Symbol indicating that the manufacturer has
made a nancial contribution to the development
and operation of a packaging materials recovery
and recycling system.
Designation of the packaging material – corrugat-
ed cardboard.
e device is intended for private indoor use only.

9
V Overview
F

10
1 Water container lid
2 Water container
3Steam emission adjustment knob (milk froth level ad-
justment)
4 Pressure gauge
5ON/OFF switch
6 Steam outlet nozzle for milk frothing
7 Dripping grill
8 Dripping tray
9 Filter basket – capacity equivalent to two coee cups
10 Portalter
11 Portalter handle
12 2 in 1 scoop (for coee lling and tamping)
13 Filter basket grip (useful when emptying)
14 Coee outlet nozzles (two)
AON/OFF switch (labelled above with No. 5)
B Coee brewing ON switch
CSteam ON switch
D Device operation readiness LED
E Steam function ON LED
F Coee brewing LED
E
D
ABC
Control panel

11
VI Package contents
Quantity Item
1 Coee machine
1 Water container with lid
1Portalter
1 Filter basket
1 2-in-1 scoop
1 Dripping tray
1 Dripping grill
1 User's manual
Open the packaging and carefully take out the device. Make sure the
set is complete and its components are undamaged. Check that the
plastic parts and the power cord are not damaged. If you nd that
any components are missing or damaged, contact the vendor and do
not use the device. Keep the package or recycle it in accordance with
the applicable regulations.
Caution! For the sake of children’s safety, do not leave
any packaging materials accessible and unattended
(plastic bags, cardboard boxes, Styrofoam, etc.). Risk
of suocation!
VII Use
7.1 Before use
1. Unpack the device.
2. Make sure the device is o. e ON/OFF switch should be set to
OFF – moved up.
3. Check whether the device power supply parameters match the
parameters of the local mains (see section 2. Technical data).
e socket must be equipped with a protective grounding pin.

12
CAUTION! e components which come into contact with food
(portalter, lter basket, 2-in-1 scoop, dripping grill, dripping tray,
water container with lid) should be cleaned as described in section
8 Cleaning and care.
CAUTION! e device is not provided with a cup or a mug. You
need to get one beforehand.
CAUTION! Clean the internal conduits before the rst use. To do
so, follow the procedure presented below:
4. Put the device on a stable and at surface. Make sure the power
outlet is easily accessible.
5. Install the dripping tray and place the dripping grill on it.
6. Remove the water container from the back of the device. Fill
it with water. e water level must be between the minimum
(MIN) and maximum (MAX) levels marked on the container.
en put the container back into place.
7. Place a cup/mug on the dripping tray. Make sure the steam emis-
sion adjustment knob is set to OFF OFF , and the steam ON switch
is set to 0. Otherwise, if the steam ON switch is set to , and the
ON/OFF switch is set to ON, both LEDs will blink. One blinks
in blue (steam ON switch), the other blinks in red(the) ON/OFF
switch.
8. Install the portalter with the lter
basket – follow the procedure de-
scribed in section 7.5 Portalter in-
stallation, but do not put coee into
the lter basket this time. Make sure
the portalter is correctly installed
and its handle is aligned in one line
with the locked padlock symbol.
9. Place the cup/mug under the coee outlet nozzles.
10. Insert the device plug into a power outlet (the outlet must be
LOCK
I N SERT

13
equipped with a protective grounding pin).
11. Turn the device on by setting the ON/OFF switch to ON . e device
operation readiness red LED starts blinking. e device will start
heating.
12. Once the device is heated, the red LED stops blinking.
13. Slide the coee brewing ON switch to . Hot water will start
owing from the coee outlet nozzle. To stop the water ow, slide
the coee brewing ON switch to .
14. When the water stops owing, take out the water container, clean
and dry it, wash the cup/mug used for the rst ushing. Now you
may start brewing coee.
Caution! During the rinsing and extraction of water, noise and noise
may appear, this is normal, the device releases air from the device.
7.2 Brewing coee or coee with milk
CAUTION! Use only potable fresh, cold water for coee brewing.
CAUTION! Using freshly ground coee is recommended. Well-
ground coee should look like salt.
1. Follow the instructions contained in items: 1 – 7 in section
7.1 Before use.
2. Install the portalter with the lter basket and coee poured into
it – follow the procedure described in section 7.3 Portalter instal-
lation and 7.4 Filling the basket lter with coee.
CAUTION! If you want to prepare coee with milk, prepare the mug
containing milk to be frothed. e milk frothing mug is not included.
To prepare cappuccino, brew the coee and then add frothed milk.
3. Turn the device on by setting the ON/OFF switch to ON . e device
operation readiness red LED starts blinking. e device will start
heating up.
4. Once the device is heated up, the red LED stops blinking.

14
5. Slide the coee brewing ON switch to . Hot water will start
owing from the coee outlet nozzle. To stop the water ow, slide
the coee brewing ON switch to .
Caution! Perform the following steps if you want to prepare coee with
milk.
6. Move the steam ON switch to , the blue LED starts blinking.
7. Once the device is heated UP, the red LED stops blinking.
8. Fill in the mug with milk – approx. 100 g per one cappuccino cup/
mug.
Caution! For better coee taste, we recommend whole milk at room
temperature. e milk must not be warm.
Caution! It is recommended to use a milk frothing mug/container
with a diameter not smaller than 70 ± 5 mm. Remember that the milk
doubles its volume. For this reason, make sure the milk mug/container
height is sucient.
Caution! Never rotate the milk frothing adjustment steam knob rapid-
ly. Otherwise a large amount of steam will accumulate in a short time,
posing a risk of scalding and milk may pour out of the container/mug.
9. Put the milk frothing steam outlet nozzle into the mug/container at
a depth of approx. 1-2 cm. When frothing the milk, move the con-
tainer/mug up and down. Slowly rotate the steam emission adjust-
ment knob counter clockwise (as in the picture below), the steam
will be emitted from the nozzle.
10. Once the required milk frothing eect is obtained, rotate the steam

15
emission adjustment knob clockwise to OFF and move the steam ON
switch to to stop milk frothing.
Caution! It is recommended to wait approx. 2 minutes before using the
device again.
11. Pour the frothed milk into the espresso prepared beforehand. Now
the cappuccino is ready. Add sugar for taste, or sprinkle the froth
with a pinch of cocoa, cinnamon or cardamom powder.
12. Immediately aer the steam stops owing, clean the steam nozzle
with a wet sponge. Be careful not to get scalded.
7.3 Installing the portalter
1. Remove the portalter by rotating it to the le.
2. Place the lter basket into the portalter and add the ground coee
in accordance with section 7.4 Filling the basket lter with coee.
Caution! For the best coee taste, use freshly ground coee of the best
quality.
Caution! If you want to prepare
1 coee cup, you need to use the
one-cup lter basket (the lter
basket is not included, purchase it
at a shop with the relevant range
of products). To prepare 2 coee
cups, use the included lter basket.
3. Put the portalter in the device and rotate it to the right, until it
reaches the “lock” position. (See photos).
Caution! e device turns o automatically aer approx. 2 minutes of
continuous use. When the device switches o automatically, it is rec-
ommended to raise the ON/OFF switch to OFF.
7.4 Filling the lter basket with coee.
1. Insert the lter basket into the portalter.
2. Fill the lter basket with freshly ground coee.

16
3. Make sure the amount of
coee is not higher than the
lter basket edge.
4. Tamp the coee with the
tamper. Add some coee if
necessary. Tamp the coee
again.
5. Remove excess coee from the lter basket edge
to ensure easy installation of the portalter into
the assembly inside the coee machine.
CAUTION! Tamping the coee is a very impor-
tant part of the process of brewing coee in the coee machine.
7.5 Hot water function
1. Turn the device on by setting the ON/OFF switch to ON . e device
operation readiness red LED starts blinking. e device will start
heating.
2. Once the device is heated, the red LED stops blinking.
3. Slide the coee brewing ON switch to . Hot water will start ow-
ing from the coee outlet nozzle. To stop the water ow, slide the
coee brewing ON switch to and stop the water ow.
4. You can repeat the preheating action and use it to get hot water.
Temperature reduction
Aer steam emission or cappuccino brewing, the device’s temperature
will increase. It means its components may become hot (the device has
been operating and generating high pressure). e readiness and cof-
fee indicators will blink very quickly. It means the device temperature
needs to be decreased. Rotate the steam emission adjustment knob to
“+”, move the coee brewing switch to , and water will ow from
the steam outlet nozzle intended for milk frothing. When the LED
stops blinking, you can move the coee brewing switch to and set

17
8.1 General rules
Proper and regular cleaning will ensure safe operation and extend
the lifespan of the device.
Warning! Before performing cleaning and maintenance
operations, turn the device o, disconnect it from the
power source and let it cool down, so as to avoid burns
and electric shock.
CAUTION!!
Do not clean the device with any strong chemicals, alkali, abra-
sive or disinfecting agents, as they may damage the surface of the
device.
Do not use metal, sharp or rough cleaning accessories, as they
may damage the surface of the device!
Never pour any liquids other than water into the water container.
Do not add anything to the water.
Do not immerse the device or the power cord in water or other
liquids.
Prior to next use, make sure that the device is completely dry.
To extend the lifespan of the device and make sure that it remains
in good working order, it is recommended that you wash the
parts that come into contact with food aer every use.
Cleaning the device
1. Disconnect the device from the power source.
VIII Cleaning and care
the steam emission adjustment knob to OFF . e temperature will start
decreasing. You may now brew another coee.
Caution! If the steam emission adjustment knob is rotated to less than
max – the “+” mark, the steam emission performance will decrease,
thus the device temperature decreasing time will be longer.

18
2. Regularly wipe the device housing with a damp cloth.
Accessories cleaning
Caution! Washing the device parts in a dishwasher is not recommend-
ed.
1. Wash the dripping tray, dripping grill, 2 in 1 scoop, portalter and
lter basket under running water with a mild detergent. Rinse the
components thoroughly and leave to dry.
Cleaning the basket lter and the portalter
1. Remove the portalter from the device.
2. Put in place and hold the lter basket lock.
3. Tap the lter basket to remove coee grounds.
4. Lower the lter basket lock back.
5. Remove the lter basket from the portalter.
6. Wash the portalter and the lter as described in the Accessories
cleaning section above.
Cleaning the water container
1. Remove the water container from the device and empty it.
2. oroughly wash the container and its lid under running water with
a mild detergent.
3. Leave until completely dry.
IX Repair
e device contains no parts that could be serviced by the user. Do
not attempt to repair the device on your own. Always have a special-
ist perform repairs.
If the power cord is damaged, it has to be replaced with an identical
one by the manufacturer, service or a qualied person.
Before you contact a customer service centre, check the following
list of most frequent problems:

19
Problem Cause Possible solutions
Water
container
is leaking
- the container is not prop-
erly installed
- MAX level exceeded
- the container is not
properly installed
- MAX level exceeded
Water
leaking
from
under
the coee
machine
- too much water in the
dripping tray
- the coee machine is
broken
- empty the dripping
tray
- have the device
serviced
Coee will
not come
out of the
device
- insucient amount of
water
- coee ground too nely
- not enough coee in the
lter basket
- the device has not been
connected to the power
source or has not been
turned on
- coee in the lter has
been tamped too much
- rubber pad le installed
on the water container
outlet.
- add water
- add more coarsely
ground coee
- add coee to the
lter basket
- connect the device
to the mains or turn
it on
- mix the coee in the
lter basket
- remove the rubber
pad from the water
container outlet
Coee/
water
leaking
from the
portalter
- the portalter not in-
stalled correctly
- too much coee in the
lter basket
- coee settled in the lter
inside the portalter
- install the portalter
correctly
- remove some coee
from the portalter
- clean the lter in the
portalter

20
X Storage and transport
Always keep the device in a dry, well-ventilated location inaccessi-
ble to children.
Protect the device against vibration and shock during transport.
XI Disposal
All the packaging materials are 100% recyclable, and are labelled as
such. Dispose of the packaging in accordance with local regulations.
Keep the packaging materials out of children’s reach, as these mate-
Milk
will not
come out
or is not
frothed
- not enough milk or the
milk is too skimmed
- the milk is not cool
enough
- the steam function LED
is not lit
- add milk or change
to whole milk
- chill the milk
- slide the steam ON
switch to ON
e device
will not
turn on
- the device has not been
connected properly to the
mains
- if the device has
been connected
properly and it still
does not work, submit
a complaint – see
section 13 Warranty
and service
Coee is
coming
out too
fast
- coee has not been
ground enough and is too
coarse
- not enough coee in the
lter basket
- coee not tamped
enough
- replace with more
nely ground coee
- add coee to the
lter basket
- tamp coee in the
lter more densely