CoolGear USBG-10XU1 User manual

USB 2.0 10-Port Industrial
High Power 2.1A Charger
Hub
Product Manual
Coolgear, Inc.
Version 1.1
September 2017
Model Number: USBG-10XU1
www.coolgear.com

2 USBG-10XU1 – Product Manual
www.coolgear.com
Revision History
Revision Date Author Comments
1.0 07/14/2015 Coolgear Original format
1.1 09/25/2017 Coolgear New Manual Format
About this document
This product manual outlines installation and features of the USBG-10XU1 USB 2.0 10-
Port Industrial High Power 2.1A Charger Hub.
Scope
The scope of this manual is to give the user of the product an understanding of its use
with detailed diagrams and verbiage. The manual allows the users to apply the product
to their application.
Intended Audience
This product is intended for use in numerous industries including but not limited to
applications such as; Automotive Environments, Airports, Warehouse, and others.
Product Support
[email protected]

USBG-10XU1 – Product Manual 3
www.coolgear.com
Table of Contents
1. Introduction.........................................................................................................4
1.1 Features .................................................................................................................. 4
1.2 Specifications .......................................................................................................... 5
2. Package Contents.................................................................................................6
2.1 Physical Diagram..................................................................................................... 6
2.2 Rack Mounting ........................................................................................................ 7
2.3 Connection.............................................................................................................. 8
2.4 Charging Mode...................................................................................................... 10
2.5 Sync Mode............................................................................................................. 11
2.6Daisy Chain (Cascade) Connection........................................................................ 12
2.7 Regulatory Compliance......................................................................................... 14
2.8 Environmental Specifications ............................................................................... 15
3. Notes, Tips, Warnings, and Safety.......................................................................16
4. Supporting References .......................................................................................17
Table of Figures
Figure 1 – Front View…………………………………………………………………………………………..………..6
Figure 2 – Rear View………………………….……………………………………………………………..……………6
Figure 3 - Rack Mounting……………………………………………………………………………………………….7
Figure 4 – Cabinet Mounting………………………………………………………………………………………….8
Figure 5, 6, 7, 8, 9, 10 – Connection…………………………………………………………………………..8-10
Figure 11 – Charging Mode…………………………………………………………………………………………..10
Figure 12 – Sync Mode……………………………………………………………………………………………..….11
Figure 13, 14, 15, 16, 17 – Daisy Chain (Cascading)………………………………………………….12-17

4 USBG-10XU1 – Product Manual
www.coolgear.com
1. Introduction
CM-10XU1 is a 10-port USB Hub with Charger, a smart solution for charging or sync of
several iPads, iPhones, iPods and USB charging devices operating simultaneously. This is
a perfect tool to eliminate the jumble of wires and chargers and also is ideal for large
capacity USB station in-house for automated duplication tasks. Places such as school’s
class room, businesses conference or meeting in organizations.
WEIGHT 2.206 lbs
DIMENSIONS 10.562(L) x 4.083(W) x 1.760in(H)
UPC 736983900302
WARRANTY 1 year from date of purchase
COLOR Black
DOWNSTREAM PORTS 10 USB Type-A Female Ports
UPSTREAM PORTS 1 USB Type-B Port
SYSTEM REQUIREMENTS Compatible with all USB enabled operating systems.
1.1 Features
•Charges or syncs up to 10 / 20 iPads,
iPods, iPhones or other USB-charged in
charge mode devices, providing each
USB port with the optimum charge
level for each device.
•Will also charge virtually any other
device that can be charged through a
powered USB port.
•Supports High Speed 480Mbps, full
speed 12Mbps and low speed 1.5Mbps
operation.
•Fully compatible with all USB
compliant device.
•Ten (10) Hi-Speed USB 2.0 downstream
ports.
•Over-current detection and protection.
•Surge & ESD Protection.
•Extends up to optimum 40 USB devices
by connecting cascade port with
another USB 2.0 charge hub(s); to see
notes under specification.
•Supports Windows OS: 98SE / ME /
2000 / XP / Vista / 7 / 8 / 8.1, Mac OS
8.6 / 9.x / 10.x or higher.
•Rack mountable.

USBG-10XU1 – Product Manual 5
www.coolgear.com
1.2 Specifications
Model No. USBG-10XU1
Chip Terminus
USB Specification USB 1.1 / 2.0 Compliant
Connector Upstream USB Type-B Female
Connector Downstream USB Type-A x10
Connector Cascade USB Type-A
LED Charge Mode Red Color x10
Power Mode External Power Adapter
Power Consumption 24VDC 6.25A
LED SYNC Mode Orange Color x10
Cable Length 1.8m
Speed 480 /12/1.5 Mbps
Current per Port 5VDC 2100mA
Dimensions (L x W x H) 268 x 102 x 40 mm
Housing Metal

6 USBG-10XU1 – Product Manual
www.coolgear.com
2. Package Contents
1) USB 2.0 Charge Hub
2) 24VDC 6.25A Power adaptor with power cord
3) USB 2.0 A/M to B/M cable
4) Mounting brackets with screws
5) User manual
2.1 Physical Diagram
Figure 1
Figure 2
1) USB Ports (Hub) – Allows Connecting iPad, tablet, or USB devices
•Beware that this unit does not require a host computer connected to the hub
for it to charge compatible devices.
•This unit does not contain accessory set of cables for iPad, tablet. Please
check with your distributor regarding of using appropriate cable.
2) CHARGER / SYNC Switch
•Allows to switch charging or sync mode under connecting with iPad, tablet.
•Charging mode (indicators light on): to charge the objective USB devices.
•Sync mode (indicators light off): to synchronize data from computer to
objective USB devices, but not allowed charging.

USBG-10XU1 – Product Manual 7
www.coolgear.com
3) LED Indicators
•LED lights up: indicates which tablet or USB device is connected successfully.
•The LED may not light up when the unit is connecting with some specific USB
devices, but it is still working on charging or synchronizing.
4) Power Switch
•User may switch power to on / off.
5) Power Jack
•To use with power adapter provided.
6) USB for Extending 2nd Unit
•It is available to connect with another unit for the purpose of extending.
7) USB Port for Computer
•It is avai8lable to connect with host computer by USB cable.
2.2 Rack Mounting
1) Use the mounting brackets and screws onto rack.
Figure 3
2) User may install on the applicable cabinet, rack environments.
Figure 4

8 USBG-10XU1 – Product Manual
www.coolgear.com
2.3 Connection
1) To turn off power switch. (Rear Panel)
Figure 5
2) Plug the power adapter to the unit’s power jack.
•The power jack is threaded with nut, so user may put power DC plug into the
power jack without losing connection.
3) Put the plug of power adapter into the wall socket. (Rear Panel)
Figure 6
4) Turn on the power switch. (Rear Panel)
Figure 7

USBG-10XU1 – Product Manual 9
www.coolgear.com
5) Using the USB A to B cable provided and connects the USB B end on the unit.
6) Using the USB A end and connects on your host computer.
Figure 8
7) In according to the previous instruction of connection with host computer, and
connects host computer with the unit. (Rear Panel)
Figure 9
8) To use USB cable and connects with tablet or USB devices to the USB ports
(Front Panel).

10 USBG-10XU1 – Product Manual
www.coolgear.com
Figure 10
2.4 Charging Mode
Please follow below ways for charging USB devices.
1) In according to the previous instruction of connection with host computer, and
connects host computer with the unit.
2) Turn the switch of CHARGER / SYNC to [CHARGER], and LED lights up.
Figure 11
3) Connect your USB devices to the USB ports on the hub.
•This unit does not contain accessory set of cables for iPad, tablet. Please
check with your distributor regarding of using appropriate cable.
•The LED may not light up even the unit can charge the iPad, tablet that is
discharged completely. User may charge for a while and disconnect. Try to
re-connect and charge again.

USBG-10XU1 – Product Manual 11
www.coolgear.com
2.5 Sync Mode
Please follow below ways for synchronizing.
1) In according to the previous instruction of connection with host computer, and
connects host computer with the unit.
2) Turn the switch of CHARGER / SYNC to [SYNC], and LED lights off.
Figure 12
[For host computer configuring iTunes]
•Please create a library folder on host computer for synchronizing and
transfers data to iPad.
•Recommends automatic updates in your iTunes preferences (to avoid
interference with automatic syncing). Please check for updates manually
to keep your software up to date.
[For iPad, tablet configuring]
•Ensure each iPad, tablet has been charged completely at first if the
objective iPad, tablet is new goods.
•Please use the unit to synchronize iPad, tablet one after another, and
configure at same way. (Login name, ID, the data you want to
synchronize etc.)
•The user may adjust the brightness of screen when you are using the unit
to synchronize iPad.
•When the user may be requested by iTunes to configure manually, you
will have to copy the configuration manually for each iPad.
[For host computer connection & sync]
•Connect iPad, tablet to the USB ports of front panel if each iPad, tablet is
configured completely.

12 USBG-10XU1 – Product Manual
www.coolgear.com
•This unit does not contain accessory set of cables for iPad, tablet. It is
especially important to use appropriate cables (USB-A to device-specific
connector) provided by the device manufacturer.
•Get started synchronizing automatically once you connect the unit.
•It may take a little while for this unit to recognize and sync. Please do not
stop by the way once the unit starts synchronizing.
•This unit may not perform sync with charging simultaneously.
[For iOS update]
•User may not perform the iPad update when iPad is connected. You must
update iOS on iPad one after another.
2.6 Daisy Chain (Cascade) Connection
This unit can extend another unit for daisy chain (Cascade) connection, the 2nd unit can sync
simultaneously as well.
•Maximum 2 units can be connected. (It allows connecting or charging maximum
up to 20/40 USB devices simultaneously.)
•If user connects with two units, the 2nd unit may not be detected by some
computers which have built in USB 3.0 hub.
In according to the previous instruction of connection with host computer, and connects host
computer with the 1st unit. (Rear Panel)
1) In according to the previous instruction of connection with host computer, and
connects host computer with the 1st unit. (Rear Panel)
Figure 13
2) Turn off the power switch of the 2nd unit. (Rear Panel)

USBG-10XU1 – Product Manual 13
www.coolgear.com
Figure 14
3) Plug the power adaptor to the power jack of the 2nd unit.
•The power jack is threaded with nut, so user may fix power DC plug into the
power jack without losing.
4) Put the plug of the power adapter into the wall socket. (Rear Panel)
Figure 15
5) Turn on the power switch of the 2nd unit. (Rear Panel)
Figure 16
6) Use the USB cable provided and connects both USB ports of the 1st and 2nd
units.

14 USBG-10XU1 – Product Manual
www.coolgear.com
Figure 17
2.7 Regulatory Compliance
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not
make any representations or warranties (implied or otherwise) regarding the accuracy and
completeness of this document and shall in no event be liable for any loss of profit or any other
commercial damage, including but not limited to special, incidental, consequential, or other
damages.
No part of this document may be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording or information recording and
retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or registered
trademarks of their respective holders.
CE/FCC & Recycling Information
CE Certification
This equipment complies with the requirements relating to Electromagnetic Compatibility
Standards EN55022/EN55024 and the further standards cited therein. It must be used with
shielded cables only. It has been manufactured under the scope of RoHS compliance.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant of part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. You are cautioned that changes or
modification not expressly approved by the party responsible for compliance could void your
authority to operate equipment. This device complies with part 15 of the FCC Rules.

USBG-10XU1 – Product Manual 15
www.coolgear.com
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all
waste electrical and electronic equipment. It is no longer allowable to simply throw away
electrical and electronic products. More details can be obtained from your national WEEE
recycling agency.
2.8 Environmental Specifications
Specification Data
Operating Temperature: 0-70°C

16 USBG-10XU1 – Product Manual
www.coolgear.com
3. Notes, Tips, Warnings, and Safety
Note
Note1: In order to prevent damaged data that may be cause by unsuitable
operation, beware of the below issues when user is switching from sync
mode to charging mode:
•User should not switch until the objective iPad or tablet OS is
updated completely.
•Do not switch until the objective USB connections are removed
safely from host computer.
Please check the user manual of USB devices for appropriate removing
method. Reference section 2.1
Note2:
•Maximum 2 units can be connected.
•It allows connecting or changing maximum up to 10 / 20 USB devices
simultaneously. Reference section 2.6
Tip N/A
Warning
1) End user may extend another unit of USB 2.0 10 charge hub. (It allows
connecting or charging maximum up to 10 / 20 USB devices
simultaneously.)
2) The specific cable for iPad, tablet isn’t included in package accessory.
Please check with your distributor regarding of using appropriate
cable.
3) Beware that iOS update cannot be performed simultaneously when
the unit is charging for USB devices.
4) If user connects with two units, the 2nd unit may not be detected by
some computers which have built in USB 3.0 hub.
Safety

USBG-10XU1 – Product Manual 17
www.coolgear.com
4. Supporting References
Document Link
Website Product Page https://www.coolgear.com/product/usb-2-0-
10-port-industrial-high-power-2-1a-charger-
hub
© 2017 Coolgear, Inc. All Rights Reserved. All products and accompanying digital documentation including images are the property
and / or trademarks of Coolgear Inc. Coolgear Inc. are continuously improving upon its products. Product specifications are subject
to change without notice.