Coolmed CMS29 User manual
1 4 .8 x 2 1 c m
Usage
0 Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control panel
located outside the fridge. Press the set button and the display will start to flash,
press the up and down buttons to select the desired temperature and press set
again. Your temperature now is set and it will take time to reach the set
temperature depending on the room temperature. The display will now revert
back to the actual temperature in the fridge. The fridge is now running to
achieve the desired set temperature . After around 10 minutes the alarm will
sound if the temperature of the fridge is higher than
8
Degrees Celsius and the
display will flash HP2. The alarm will stop once the temperature of the fridge
reaches
8
Degrees Celsius or alternatively the alarm can be stopped by pressing
the up or down arrows.
Insert 4 AA batteries in the battery compartment on the right hand side of the
fridge. This is to ensure the temperature recorder still records the temperature
in the event of a power failure.
On the temperature control, pressing the down arrow will reduce the
temperature and the up arrow will increase the temperature. The temperature
range is 2 -
8
Degrees Celsius.
coolmed.co.uk-
.coolmed.co.uk
8
Alarm Function
Display Alarm Codes
High / Low Temperature Alarm
HPl
HP2
coolmed.co.uk-
.coolmed.co.uk
10
coolmed.co.uk-
.coolmed.co.uk
11
This manual suits for next models
9
Table of contents
Other Coolmed Refrigerator manuals
