Coolpad Surf User manual

Coolpad Surf
Mobile Hotspot
User Manual

Table of Contents
HELLO FROM COOLPAD................................................................1
GETTING STARTED.........................................................................2
Device Layout............................................................................................2
On-Screen Indicators ................................................................................3
Charging Your Mobile Hotspot ..................................................................4
Setting Up Your Mobile Hotspot................................................................4
Connecting Your Wi-Fi Device to Your Mobile Hotspot.............................6
Using the WPS..........................................................................................6
MANAGING YOUR MOBILE HOTSPOT..........................................8
Access Mobile Hotspot Using A Browser..................................................8
Access Mobile Hotspot Using USB Cable.................................................9
WEB UI CONFIGURATION ............................................................10
Home.......................................................................................................10
Information ..............................................................................................10
SMS.........................................................................................................11
Settings ...................................................................................................11
GET UPDATES ...............................................................................16
Specs & hardware...................................................................................17
In-box contents........................................................................................18
Declaration of hazardous substances .....................................................19
HEALTH/SAFETY/WARRANTY GUIDE ........................................20
Important Health Information and Safety Precautions.............................20
TIA Safety Information.............................................................................28

Safety Information...................................................................................31
Consumer Information on SAR ...............................................................34
STANDARD LIMITED WARRANTY...............................................37

1
Hello from Coolpad
Thank you for purchasing your Coolpad Surf Mobile Hotspot! Please follow these simple
but important instructions for optimal use of your new mobile hotspot:
Notice: Products or services of the vendor or carrier are subject to change within this User
Guide without prior notice.
We offer self-service for our smart terminal device users. Please visit the Coolpad
Americas official website (at www.coolpad.us) for more information on supported product
models. Information on the website takes precedence.

2
Getting Started
Get off to a running start with your new Coolpad Surf Mobile Hotspot!
Device Layout
•Power key: Hold the Power key for 3 seconds to power the device on/off. When the
screen is off, press the Power key to turn the screen on.
•WPS key: Hold the WPS key for 3 seconds to activate the WPS function. Once
activated, the Wi-FiTM LED indicator will flash every two seconds. If the network is not
accessed within 2 minutes, the device will automatically exit WPS (Wi-Fi Protected
Setup) mode.
•LED indicators: Display network signal, Wi-Fi, SMS, battery charge and mobile data
status.

3
•USB port: Use the USB port to charge your device via the USB cable.
•Reset: Hold both the Power key and the WPS key simultaneously for 15 seconds. All
LED indicators will flash green 4 times to indicate that the device has been reset to
factory default settings.
•Reboot: Hold the Power key for 10 seconds to restart your device.
On-Screen Indicators
Indicators
Description
Network
Displays your current network status. Green light indicates good
network connection; yellow light indicates poor network connection;
red light indicates no network connection, no SIM card, or no service.
Wi-Fi
Indicates when Wi-Fi is connected.
SMS
Indicates when there is a new message.
Battery
Displays your current battery status. Solid green light indicates the
battery level is 40%-100%, solid yellow light indicates the battery
level is 16%-39%, and solid red light indicates the battery level is less
than 15%; when the device is charging, the indicator will flash red
when the battery level is below 15%, will flash yellow when the
battery level is 16%-39%, and will flash green when the battery level
is 40%-100%.
Data
Indicates when your data allotment is running out. The indicator will
flash red when the data usage is higher than 75% of the monthly data
plan set, will flash yellow when the data usage is 51%-75%, and will
flash green when the data usage is below 50%. You will need to
configure your monthly data plan and tick the "Auto Disconnected"
box on Web User Interface first.

4
Charging Your Mobile Hotspot
1. Connect the microUSB end of the USB cable to the USB port on your device.
2. Connect the other end to the travel adapter.
3. Connect the travel adapter to an electrical outlet to fully charge your device.
Note: You can also charge the device by connecting it to a computer with the USB cable.
Setting Up Your Mobile Hotspot
1. Open the back cover. Lift gently in the direction shown.

5
2. Remove the battery. Flip the device upside down and lift the battery upward
gently as shown.
3. Insert the Nano SIM card. Install the battery and replace the back cover.
When replacing the back cover, please ensure the back cover is aligned
correctly.

6
Connecting Your Wi-Fi Device to Your Mobile Hotspot
1. Power on your mobile hotspot.
2. On your computer or other Wi-Fi enabled device, search for available Wi-Fi networks
and select network name (SSID) located on label on back panel of your mobile
hotspot.
Note: Wi-Fi name (SSID) and Wi-Fi Password are located on the label inside the back
cover of the device.
•From a Windows computer: Left-click Wireless Network Connection on the
task bar to view available networks. Choose the SSID from the list of available
networks.
•From a Mac computer: Select System Preferences > Network. Choose the
SSID from the list of available networks.
•From an iOS device: Go to Settings > Wi-Fi. Choose the SSID from the list of
available networks.
•From an Android device: Go to Settings > Wi-Fi. Choose the SSID from the list
of available networks.
3. Enter the password located on label on back panel and click OK.
Using the WPS
If your Wi-Fi device supports WPS, you do not have to input the password manually after
a WPS connection has been established. Please follow the following steps:
1. Power on your Mobile Hotspot and enable the Wi-Fi function from the device you
would like to connect.
2. Press and hold the WPS key on your device for 3 seconds to start the Wi-Fi
Protected Setup authentication process.