Coolworks TR8-32 User manual
Stop
Please read and understand this manual before any assembly
or use of this product.
Before beginning assembly of product, make sure all parts
are present.
Instruction Manual
COOLWORKS®
32” Tower Fan with Oscillation
32” Tower Fan
with Oscillation
Model No. TR8-32
32” Tower Fan with Oscillation
23
Table of Contents
Important Safety Instructions
Operating Instructions
Care and Maintenance
Warranty
3
5
6
6
Important Safety Instructions
As with all electrical appliances, basic safety
precautions should always be followed to reduce
the risk of electric shock, fire, or injury to
persons, including the following precautions:
• Read all the instructions before using this fan.
• Use this fan only as described in this manual.
Any other use not recommended by the
manufacturer may cause electrical shock, fire
or injury to persons.
• Do not operate the fan with a damaged
power cord or after the fan malfunctions or
has been dropped in any manner.
• Use of extreme caution is necessary when any
fan is used by or near children, disabled
persons or pets and whenever the fan is left
operating unattended.
• Do not place the fan on a small, unlevel,
uneven or any surface which might allow fan
to tip or fall.
• For proper operation, fan should be placed on
a smooth, non-combustible, level surface.
• Always unplug fan when not in use, when
moving from place to place, when assembling
or disassembling parts, and before cleaning.
• The use of attachments, not recommended or
sold by the manufacturer, may cause hazards.
• Do not use outdoors.
• Do not use fan in window. Rain may cause
electrical hazard (for non-window models).
• Do not operate the fan with blade guards or
any safety device removed.
• Avoid the use of extension cords due to risk
of fire. If an extension cord must be used, the
cord must be minimum 14 AWG and rated not
less then 1875 watts.
• Do not run power cord under carpeting. Do
not cover cord with throw rugs, runners or
the like. Arrange cord away from traffic area
where it will not be tripped over.
Intended Use:
This product is intended for indoor residential and office use only, not for industrial or other commercial
applications. Use only with electrical wiring that is in good working order and that meets applicable codes and
ordinances. If you have any questions whether your wiring is adequate, consult a qualified electrician.
While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of those
instructions, we have used the word "WARNING" to indicate the level of hazard: WARNING indicates a hazard
which, if not avoided, could result in injury or death.
WARNING: SHOCK HAZARD
Use your fan only in dry environments. This
fan is not intended for use in a bathroom,
laundry area, or similar locations, or near
sinks, washing machines, swimming pools
or other sources of water. Never locate fan
where it may fall into a bathtub or other
water receptacle. Do not use in damp
environments such as flooded basements.
WARNING: HOT SURFACES
Do not touch fan motor when in use. This
motor is hot when in use, to avoid burns,
do not let bare skin touch hot surfaces.
WARNING: FIRE HAZARD
Fans have arcing or sparking parts inside.
Do not use near combustible materials or
flammable gases or sources of heat. Do
not use in areas where gasoline, paint or
flammable materials are used or stored. To
prevent a possible fire, do not block air
intakes or exhaust in any manner. Do not
insert or allow foreign objects to enter any
ventilation or exhaust opening as this may
cause an electric shock, fire, or damage
the fan.
WARNING: ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use
with adequate electrical system that is up
to code.
CAUTION: TO PREVENT ELECTRIC SHOCK,
this product has a polarized two prong plug
(one blade is wider than the other) that
must be fully inserted in to a matching
properly grounded outlet. This plug is
designed to fit a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If the plug still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, do not use this
product with any solid-state speed control
device.
• Do not insert or allow any object to enter any
openings on the fan. Doing so may cause
electric shock and/or fire hazard. Avoid
contact with moving parts.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure they
do not play with the appliance.
DO NOT operate any fan with a damaged cord
or plug or after fan malfunctions, has been
dropped or damaged in any manner.
Do not operate fan with a broken blade, safety
cage or any visual imperfections. Disconnect
power before servicing.
DO NOT run power cord under carpeting. DO
NOT cover cord with throw rugs, runners or the
like. Arrange cord away from trac area where it
will not be tripped over. Avoid the use of
extension cords due to risk of fire. If an extension
cord must be used, the cord must be minimum
14 AWG and rated not less then 1875 watts. Do
not use an extension cord unless the plug can be
completely inserted into its receptacle. Unplug
the fan when not in use. Do not operate fan with
its ventilation obstructed.
45
32” Tower Fan with Oscillation
SAVE THESE INSTRUCTIONS
WARNING: ELECTRICAL SHOCK HAZARD
Do not use withdamaged cord or plug. Use
with adequate electrical system that is up
to code.
CAUTION: TO PREVENT ELECTRIC SHOCK,
this product has a polarized two prong plug
(one blade is wider than the other) that
must be fully inserted in to a matching
properly grounded outlet. This plug is
designed to fit a polarized outlet only one
way. If the plug does not fit fully into the
outlet, reverse the plug. If the plug still does
not fit, contact aqualified electrician. Do not
attempt to defeat this safety feature.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, do not use this
product with any solid-state speed control
device.
DO NOT operate any fan witha damaged cord
or plug or after fan malfunctions, has been
dropped or damaged in any manner.
Do not operate fan with a broken blade, safety
cage or any visual imperfections. Disconnect
power before servicing.
DO NOT run power cord under carpeting. DO
NOT cover cord with throw rugs, runners or the
will not be tripped over. Avoid the use of
extension cords due to risk of fire. If an extension
cord must be used, the cord must be minimum
14 AWG and rated not less then 1875 watts. Do
not use an extension cord unless the plug can be
completely inserted into its receptacle. Unplug
the fan when not in use. Do not operate fan with
its ventilation obstructed.
Operating Instructions
Fan Operation
Always operate the fan in the upright position following all instructions and recommendations listed
in this manual.
Fan Location
Place the fan in the area of the room that will provide proper fan cooling.
Fan Connection
Plug fan directly into 120 Volt A.C., 60 Hz wall outlet. Be sure plug fits tightly in outlet. A loose
connection may cause overheating and damage to the plug or fan.
Note: To prevent overloading a circuit, do not plug the fan into a circuit that is servicing other
electrical needs.
Turning Fan On/
Place fan on stable level surface. Plug fan into proper polarized outlet. To start the fan, rotate top
control dial to desired fan speed (1, 2 or 3). Rotate the dial clockwise for standard use and
counter-clockwise for oscillation use. See Control Panel below. Rotate top control dial again to OFF
position to discontinue use. Unplug fan when not in use.
Fan Speed And Oscillation
Rotate top control dial to desired fan speed (1, 2 or 3). Rotate the dial clockwise for standard use and
counter-clockwise for oscillation use. See Control Panel below.
Fan Base Assembly
Simple assembly is required to use this fan.
1. Rotate the base holder (F) o , which is at
the bottom of the fan housing.
2. Place the Rear base panel (B) between the
fan housing (D) and base holder( F), in the
right direction.
3. Align the Rear base panel (B) and Front
base panel (A) together
4. Put the base holder (F) back and tighten it
to hold the base panels on the fan housing
(D).
Fan speed
with oscillation
Fan speed
without oscillation
Control Panel
12
34
6
32” Tower Fan with Oscillation
Warranty
Printed in China
Your COOLWORKS®Fan has warranty against defects in materials and workmanship for a period of
one (1) year from the date of original purchase. Please keep your proof of purchase (receipt) for any
warranty claims. Warranty does not cover wear and tear, and damages arisen from misuse or use
not in accordance with the product instructions.
Care and Maintenance
Cleaning
• CAUTION-Before cleaning the fan be sure to disconnect power cord from the plug.
• Clean the grille surface with a clean damp cloth. Do not use harsh chemical or abrasive cleaners. DO
NOT IMMERSE THE FAN OR ANY WIRES IN WATER.
• Replace front grille before fan use.
• Allow fan to dry completely before use.
• Periodic grille cleaning with a vacuum will prevent dust build up.
• The motor is sealed and does not require any interior maintenance, cleaning or lubrication.
Maintenance
The Internal motor bearings are permanently lubricated at the factory and do not require any additional
lubrication.
Repair
DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN IF IT HAS
MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
Storage
• Keep original carton for storage of the fan.
• Coil and tie the power cord to avoid damage during storage.
Other Coolworks Fan manuals
