Coolworks CRSF-18A1 User manual

18” High Velocity
Pedestal Fan
with Oscillation
Stop
Please read and understand this manual before any assembly
or use of this product.
Before beginning assembly of product, make sure all parts
are present.
Customer Service: [email protected] / 1-866-206-0888
Instruction Manual
18” High Velocity
Pedestal Fan
with Oscillation
Model No. CRSF-18A1

18” High Velocity Pedestal Fan with Oscillation
23
Table of Contents
Technical Specifications
General Safety Rules
Main Parts
Assembly Steps
Operating Instructions
Maintenance
Warranty
2
3
4
5
6
6
6
Technical Specifications
Model :
Rated Voltage :
Rated Frequency :
Rated Power :
CRSF-18A1
120 V
60 Hz
70 W
General Safety Rules
Read and save these instructions.
1. Do not connect the fan to the power supply until the fan is fully assembled.
2. Do not connect to any power supply other than 110V/60Hz.
3. Never operate the fan if it has damaged or worn parts. It should be returned to the
manufacturer, service agent or a similarly qualified person for repair in order to avoid a hazard.
4. Always position the fan on a stable& level surface.
5. Do not spray anything into the fan.
6. Do not use the fan near flammable areas or substances.
7. To reduce the risk of electric shock, do not remove any screws when the fan is plugged into the
supply mains.
8. Do not insert fingers or other objects through the fan grills.
9. Do not remain in the direct wind path of the fan for long periods of time.
10. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
11. The appliance is for indoor use only.
12. Keep the appliance and its cord out of reach of children.
READ & SAVE THESE INSTRUCTIONS
DISPOSAL: Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities. Contact your
local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and well-being.

45
18” High Velocity Pedestal Fan with Oscillation
1. Assemble main shaft (K) on the base (N) and fasten four screws & nuts (M). Please see
“STEP 1”.
2. Loosen the firm screw, pull out the extendable shaft (I) from the main shaft (K), then fasten
the screw from the neck of the motor (E) on the extendable shaft (I). Please see “STEP 2”.
3. Put the rear grill (D) onto the front panel of the motor and fasten it with four screws. Please
see “STEP 3”
Assembly Steps
A Front grill
B Blade
CScrews
DRear grill
EMotor
FOscillating knob
GSwitch
HSupply cord with plug
IExtendable shaft
JHeight adjustable nut
KMain shaft
LBase cover
MScrew & nuts
NBase
Ref Description
Main Parts
F
D
C
B
A
H
G
I
K
J
N
M
L
E
4. Put the blade (B) onto the motor shaft with the screw to fasten it. Please see “STEP 4”.
5. Put the front grill (A) onto the rear grill (D), then secure both grills together with the grill clips
on the outer edge of the front grill. Please see “STEP 5”.
STEP 1 STEP 2 STEP 3
Base cover
Screws & Nuts
Motor
Rear Grill
Motor
Screw
Screw
M5 x 4
Extendable shaft
Main Shaft
Base
STEP 4 STEP 5
Front Grill
Blade
Screw

6
18” High Velocity Pedestal Fan with Oscillation
Once the fan has been completely assembled, you can now plug it into a mains socket. Turn the
power on to the mains socket and then switch on the fan by turning the button of the rotatory
switch to any of the three speeds ‘1’, ‘2’, or ‘3’ on the control panel (‘3’ is the fastest speed). Button
‘0’ switches the fan ‘o’.
Printed in China
Your Coolworks fan has warranty against defects in materials and workmanship for a period of one
(1) year from the date of original purchase. Please keep your proof of purchase (receipt) for any
warranty claims. Warranty does not cover wear and tear, and damages arisen from misuse or use
not in accordance with the product instructions.
Warranty
Operating Instructions
NOTE: Before inserting the plug into an electrical outlet, check if the voltage & frequency on the data
plate match the local voltage & frequency.
Maintenance
1. Ensure that the fan is switched o from the supply mains before removing the grills.
2. Unplug the appliance from the power before servicing and cleaning.
3. Clean your appliance with a slightly damp cloth and dry it up with a dry cloth.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
To make the fan oscillate (rotate from side to side), push down the oscillating knob (F) Iocated on
the top of the motor housing (E). To stop oscillation, pull the button up.
To adjust the height of the fan, release the height adjustable nut (J), extend the shaft to the desired
height and re-tighten it.