04/04/2007 2:45:37 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
The Fail-Safe CFF Series is designed for use in horizontal or non-laminar air
flow clean rooms. The enclosed and gasketed housing and one-piece, out-
side flanged door protect against infiltration of airborne bacteria. The die
formed edges on the door frame and the hole-free design of the housing
prevent air exchange between the fixture and plenum, allowing relamping
without contamination of the clean areas. These luminaires are U.L. listed
and C.S.A. certified for wet locations and are manufactured in accordance
with U.S.D.A., F.D.A., N.S.F. and Federal Standard 209E. 200 PSI Hose Down
The CFF Series is suitable for use
in I.E.S. Class 100, 1,000, 10,000
and 100,000 clean room environ-
ments. Applications include clean
rooms, technical and biomedical
labs, food processing/testing
centers and pharmaceutical labs.
Lens is clear extruded with prisms
positioned inside fixture and
smooth surface on the outside for
Flush mounted, stainless steel
machine screws secure through
captive cage nuts in housing and
are evenly spaced to compress
Die-formed, 20 ga. CRS with tightly
butted and seam welded, sealed
end caps. Contains no holes that
would allow air passage. Standard
white high reflectance polyester
powder coat finish. Gloss: 85%;
Reflectance: 93%; Hardness: 2H;
Unique, Particulock(TM) lens
retention system utilizes con-
tinuous, 18 ga. media clampdowns
to sandwich gasketing and
integrate lens and door frame for
Two braided, stainless steel cables
on one side of door provide
One piece, 18 ga. door with baked
white polyester powder coat, fully
gasketed, outside door with die-
formed edges eliminates seams
which could entrap microscopic
contaminants. Optional doors
Standard Class P, CBM/ETL ballast.
White, closed cell, Flexiseal(TM)
gasketing surrounds perimeter of
lens to seal lens to door frame and
around perimeter of door to seal
door to housing. Another layer
seals fixture to ceiling system after
A gasketed access plate on top of
the housing with two flattened,
7/8" diameter knockouts allows
connection of vapor tight conduit
fitting. Optional, above ceiling, top
access door for luminaire main-
tenance is available and ideal for
food processing and cleanroom
U.L. listed, C.S.A. certified,
2' X 2'
2' X 4'
FLUORESCENT FLANGE
One-Piece Door
C
B
D
HJ
A
F
I
GE
4 3/8"
[111mm]
3 3/4"
[95mm]
22 11/16" [576mm]
24 1/4" [616mm]
26" [660mm]
E N E R G Y D A T A
Input Watts:
STD Ballasts & STD Lamps
(2) 20W T12 Fluorescents: 53W
(3) 20W T12 Fluorescents: 85W
(4) 20W T12 Fluorescents: 106W
(2) 40W Biaxial Fluorescents: 82W
(3) 40W Biaxial Fluorescents: 127W
ES Ballasts & STD Lamps
(2) 17W T8 Fluorescents: 45W
(3) 17W T8 Fluorescents: 68W
(4) 17W T8 Fluorescents: 90W
(2) 32W T8 Fluorescents: 71W
(3) 32W T8 Fluorescents: 108W
(4) 32W T8 Fluorescents: 142W
(2) 40W T12 Fluorescents: 86W
(3) 40W T12 Fluorescents: 136W
(4) 40W T12 Fluorescents: 172W
(2) 40W U-Lamps: 86W
ES Ballasts & ES Lamps
(2) 40W T12 Fluorescents: 76W
(3) 40W T12 Fluorescents: 120W
(4) 40W T12 Fluorescents: 152W
(2) 40W U-Lamps: 76W
Electronic Ballast Data
Consult Cooper Lighting Representative.
9 1/2"
[241mm]
5"
[127mm]
5"
[127mm]
5"
[127mm]
9 1/2"
[241mm]
7 1/2"
[190mm]
7 1/2"
[190mm] 6"
[152mm]
3"
[76mm]
6"
[152mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
Flange Type-One-piece Door
1 1/2"
[38mm]
9 11/16"
[246mm]
23 1/16" [586mm]
Ceiling Cut-Out
25 1/4"
[641mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/16" [5mm] Dia.
Yoke Mounting Hole
36"
[914mm]
48 5/16"
[1227mm]
1 3/4"
[44mm]
1 1/2"
[38mm]
9 11/16"
[246mm]
23 1/16" [586mm]
Ceiling Cut-Out
25 1/4"
[641mm]
(2) 7/8" [22mm] KO
Gasketed Access Plate
(4) 3/16" [5mm] Dia.
Yoke Mounting Hole
12"
[305mm]
24 5/16"
[617mm]
