
number
3 in 1 Kitchen Roll Dispenser 10249 Instructions
v001: 17/11/15
Please read and retain for future reference
Assembly & Use:
Affix the dispenser to the kitchen wall using the wall mountings included.
Press the button at the top of the unit to release the front hatch.
Insert cling film into the top compartment of the dispenser and tin foil into the second
compartment.
This dispenser fits roll up to 30 cm width (300mm).
Carefully feed the film and foil ends into the cutters on the front hatch.
Close the dispenser hatch.
Pull you film or foil to the required length and slide the lever from left to right to cut.
Kitchen towel can be conveniently stored using the bottom holder (shown below).