Coopers of Stortford 8850 User manual

2 Drawer Shoe Storage 8850 Instructions
FITTINGS
Part Des ription Qty
A Long s rews 16
BShort s rews 16
CHandles & fixings 2
DFeet 4
E Drawer side panels 4
F Drawer fitting 4
Drawer fitting 4
Drawer fitting 4
ASSEMBLY
1. Using a hammer; fit the drawer fittings (F) to the side panels.
2. Assemble the outer shell of the abinet by atta hing the side panels
(1) to the top panel (2), using long s rews (A).
F
2.
1.
1
2
1
33
3
PARTS
1 = 2x Side panels
2 = 1x Top panel
3 = 2x Draw fronts
4 = 3x Supports
5 = 4x Draw panels
6 = 2x Draw base
Tools required:
Hammer, Crosshead
s rewdriver
NB: Part B (Short
s rews) - may be more
than required.
1
6 2 2 5 4

3. Assemble the drawers, atta hed the side se tions (E) to the drawer front (4) using small
s rews (B). Slot drawer base (6) and drawer panels (5) into position. Fix drawer handle (C)
onto the drawer front using the fixings provided.
4. Fit plasti aps (F) to inside of drawer sides and tighten using s rews (B).
Atta h feet (D) and s rew aps. Slide in drawer panels (5) and se ure using
s rews (B).
5
6
4
B s rew in
either side
• Capa ity will vary depending on size and style of shoe.
• Wipe lean with a soft loth.
• Tighten s rews fully before use. Periodi ally he k to ensure s rews
remain tight.
PACKAGING DISPOSAL:
• Dispose of the pa kaging at your lo al re y ling entre.
• Dispose of paper and arton separately from plasti bags at your lo al
re y ling entre.
• Dispose of the item at the end of its lifespan at your lo al authorised
household waste re y ling entre.
3.
4. 5
E

3 Drawer Shoe Storage 8851 Instructions
FITTINGS
Part Des ription Qty
A Cam lo ks 21
BShort s rews 36
CHandles & fixings 2 & 6
DFeet 4
E Drawer side panels 6
F Drawer fitting 6
Drawer fitting 6
Drawer fitting 6
ASSEMBLY
1. Using a hammer; fit the drawer fittings (F) to the side panels.
2. Assemble the outer shell of the abinet by atta hing the side panels to (1) the top
panel (2), supports (3) and top panel (4) using am lo ks (A).
F
2.
1.
3
3
3
4
PARTS
1 = 2x Side panels
2 = 1x Top panel
3 = 3x Supports
4 = 1x Top Support
5 = 3x Draw Supports
6 = 3x Draw fronts
7 = 6x Panels
Tools required:
Hammer, Crosshead
s rewdriver
NB: Part B - may be
more than required.
1
2 7 6 4 3 5

3. Assemble the drawers, atta hed the side se tions (E) to the drawer front (6)
using small s rews (B). Slot drawer base (7) and drawer support (5) into
position. Fix drawer handle (C) onto the drawer front using the fixings provided.
4. Fit plasti aps (F) to inside of drawer sides (1) and tighten using s rews
(B). Atta h feet(D) and s rew aps. Slide in drawer panels (7) and se ure
using s rews (B).
7
5
B s rew in
either side
• Capa ity will vary depending on size and style of shoe.
• Wipe lean with a soft loth.
• Tighten s rews fully before use. Periodi ally he k to ensure s rews
remain tight.
PACKAGING DISPOSAL:
• Dispose of the pa kaging at your lo al re y ling entre.
• Dispose of paper and arton separately from plasti bags at your lo al
re y ling entre.
• Dispose of the item at the end of its lifespan at your lo al authorised
household waste re y ling entre.
3.
4.
E
6
7
7
7