Coopers Wheelbarrow Planter 11022 User manual

Wheelbarrow Planter 11022 Instructions for Use
Please read and retain these instructions for future reference v001: 13/11/17
Parts
IMPORTANT:
Part no. 2 the parts are NOT identical. The part with
pre-drilled holes underneath is the front piece which
attaches to part no. 3.
ASSEMBLY INSTRUCTIONS
Step 1
Using bolts part B x4 on each side where shown,
connect parts 2 and 3.
Step 2
Turn upside down
and connect part 1
to the assembly
using 2x screws A.
Front
Rear

Wheelbarrow Planter 11022 Instructions for Use
Please read and retain these instructions for future reference v001: 13/11/17
Step 3
Fit parts 5 using 2x bolts C.
Assemble wheel
Attach 2x parts 6 to the wheel (part 4)
using 2x pins D .
Step 4
Slot in assembled wheel as shown.
Step 5
Turn right way up. Fit parts 5 to the wheel on either
side using 2 x screw A. Fit part 7 to part 5 on either
side using screw C and to part 3 using 2x bolts B.
DISPOSAL
•Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling
regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste
recycling centre.