Coopers 10607 User manual

Parts list:
A. Outside
panel
B. Inside
panel x
C. Backrest x2
D. Middle seat
(or table)
E.
Middle Backrest
F.
Left & Right seat x2
G.
Seat brace
D 38.5
x W 6 cm
H.
Connection bar x1
D 48.5 x W 4 cm
I.
Connection bar x
D 49.5
x W 4 cm
K.
Front bar x2
D 38.5
x W 4 cm
L.
Table stand bar
panel
x2 1.
Large screw
panel x
2 2.
Large Bolt
3.
Bolt nut
x1 4.
Small bolt
(or table)
Middle Backrest
x1 5.
Medium Screw x2
Left & Right seat x2
6.
Small Screw x3
Seat brace
x4 7.
Allen Key x2
x W 6 cm
Connection bar x1
D 48.5 x W 4 cm
Connection bar x
1
x W 4 cm
Front bar x2
x W 4 cm
Table stand bar
x1
Large screw
x10
Large Bolt
x16
Bolt nut
x16
Small bolt
x2
Medium Screw x2
Small Screw x3
Allen Key x2

Assembly Instructions:
Assemble each chair separately.
Attach the Outside Panel (Part
A
Front Bar (Part K), using
Large Screw (1) and
(3).
Repeat the above step to
attach the
Repeat to assemble the other chair.
Step 1
AB
CG
G
K
1
1
1
2
2
2
2
2
33
3
3
Assemble each chair separately.
A
) to the Backrest (Part C
), and the Seat Brace (
Large Screw (1) and
the Large Bolts (2)
together with Bolt nuts
attach the
Inside panel (Part B).
Repeat to assemble the other chair.
1
1
2
2
B
G
G
K
2
3
3
3
K
1
2
SQUARED
CORNER
2
7
3
), and the Seat Brace (
Part G),
together with Bolt nuts
A
1
1
2
C
2
2
3

Connect the Middle Backrest (Part E) to the Inside Panels (Part B), using Medium Screw
(5) and Large Screw (1).
At the same time, atta
ched the Connection bars (Part H
(Part B), using Large Bolts (2) together with Bolt nuts (3).
Put the Seats (Part F) to their position.
Step
2
F
Attach the Table Stand Bar (Part L) to the Middle Seat (Part D), using Small Screws (6).
Step
3
Connect the Middle Backrest (Part E) to the Inside Panels (Part B), using Medium Screw
ched the Connection bars (Part H
) and (Part I)
to the Inside Panels
(Part B), using Large Bolts (2) together with Bolt nuts (3).
Put the Seats (Part F) to their position.
2
7
3
55
1
1
2
I
E
H
2
2
2
3
Attach the Table Stand Bar (Part L) to the Middle Seat (Part D), using Small Screws (6).
6
6
D
L
Connect the Middle Backrest (Part E) to the Inside Panels (Part B), using Medium Screw
to the Inside Panels
F
Attach the Table Stand Bar (Part L) to the Middle Seat (Part D), using Small Screws (6).

Attached the table (Part D) to the Middle Backrest Part E), using Small Bolts (4).
Fasten the hook
on the Table stand bar (Part L) to the connection bar (Part I) to make sure
the table is secured before using.
Step
4
Attached the table (Part D) to the Middle Backrest Part E), using Small Bolts (4).
on the Table stand bar (Part L) to the connection bar (Part I) to make sure
the table is secured before using.
D
L
4
4
Attached the table (Part D) to the Middle Backrest Part E), using Small Bolts (4).
on the Table stand bar (Part L) to the connection bar (Part I) to make sure

If do not want to use table, pull out
Step
5
If do not want to use table, pull out
2 Small Bolts (4) and move it
to become a seat.
Bolt s
Bolt s
to become a seat.

WARNINGS / CAUTIONS:
•
Do NOT use on an uneven
•
When the ench is NOT in use, please cover or store in a dry
•Take care
when lifting this
•Maximum Weight is
200KG
CLEANING INSTRUCTIONS:
•
Wipe Clean with a soft
DISPOSAL:
•
Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
local recycling
regulations.
• At the end of the
product’s lifespan please dispose of it at an authorised household waste
recycling centre.
Do NOT use on an uneven
surface.
When the ench is NOT in use, please cover or store in a dry
garage/shed.
when lifting this
item.
200KG
Wipe Clean with a soft
brush.
Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
regulations.
product’s lifespan please dispose of it at an authorised household waste
garage/shed.
Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
product’s lifespan please dispose of it at an authorised household waste