Copernicus Tech Tub TEC600 User manual

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Please Recycle
ŸThis product is meant to be assembled by an adult.
ŸIn its unassembled state, small parts present a hazard.
ŸTo be used under direct supervision of an adult.
WARNING
TEC600
Don’t throw
these instructions
away!
Positioning template
printed inside!
Assembly Guide
TEC600_2017_A
Check out our other products online at
www.copernicused.com
For assistance, please contact us:
1-800-267-8494
Email [e-mail]
Have your packing slip ready for reference
®
Tech Tub

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Frame
Dear Educator,
®
Thank you for purchasing one of our products. I hope that the Tech Tub is useful in your classroom.
If you have any questions, concerns, or ideas please contact us by telephone at 1-800-267-8494 or email at
[e-mail].
Enjoy using your new product and happy teaching.
Jim Phillips
Chief Cook and Bottle Washer
®
Tech Tub
We do not inherit the
earth from our ancestors,
we borrow it from our
children.
NORTH AMERICAN
PROVERB
Change is the end result
of all true learning.
LEO BUSCAGLIA
What you leave behind is
not what is engraved in
stone monuments, but
what is woven into the
lives of others.
PERICLES
Education is the most
powerful weapon which
you can use to change the
world.
NELSON MANDELA
2
Assembly Guide
TEC600_2017_A
Check out our other products online at
www.copernicused.com
For assistance, please contact us:
1-800-267-8494
Email [e-mail]
Have your packing slip ready for reference
TEC600
Life
Tub and Lid
Warranty
Time To validate your warranty, submit the ON-LINE form at www.copernicused.com
Enter a draw to win a Copernicus Product for your classroom at the same time!
Validate Your Warranty
Component
Warranty
1
Year
Frame

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
3
Warning! Hazard Risks!
This product is to be used under the supervision of an adult.
Indoor Use
Only
This product is intended for indoor use only. To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The internal components are not sealed from the environment.
Read your power strip electrical specifications. Only plug in devices that are approved for use with this
power strip. Connect the supplied power strip directly to a wall outlet. Do not connect to another
power strip or use an extension cord. Unplug when not in use. Do not leave this product plugged in
for more than 72 consecutive hours. Turn off power strip before unplugging.
Power Strip
Specifications
Do not install or use the electrical components of this unit during a lightning storm.
Electrical Shock
In its unassembled state, this product contains parts that can be hazardous to small children. This
product should be assembled by an adult.
Small
Parts
Ensure that any cables extending across the floor to your product are properly bundled and marked to
avoid tripping or falling which may lead to personal injury.
Cable Trip
Hazard
Climb Hazard
Do not climb on, hang from or suspend objects from any components of your product unless otherwise
specified.
Read the electrical specifications of any electronic equipment you are using with your Copernicus
products. Failure to read these specifications and follow their instructions could result in damage to your
equipment or personal injury.
Electronic
Equipment
Adult
Supervision
Please read the warnings below for important safety information regarding your product. Failure to
read these warnings or to follow the instructions below could result in personal injury or damage to
your product that could void your warranty.

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Lid (1)
Tub (1)
Locking Pin (1)
Padlock (2)
Locking Block (1)
Cable Hook (2)
Spacer (2)
Cable Management Pocket (1)
Divider (6)
Power Strip (1)
Power Strip
Bracket (2)
Rail (2)
Items not shown:
Bottom Foam Pad (1)
Padlock Keys (6)
4
TEC600 ®
Tech Tub

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Before beginning, you should have:
Additional tools required:
Adjustable wrench x2 OR 11mm Wrench x2
®
Tech Tub
x1
Divider
x6
(23229)
Locking Block
x1
(31078)
Locking Pin
x1
(31079)
Padlock
x2
Power Strip
x1
(25515)
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
Hook & Loop
Straps
x6
Key
x6
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Power Strip Bracket
x2
(232281)
Cable Hook
x2
Allen Key 4mm
1x
M4 Flat Washer
x4
D
E
F
M4 Lock Washer
x8
B
Foam
x1
®
(Found inside Tech Tub )
5
TEC600
In Box 1
Hardware
Actual Size
Contents - Box 1
Foam
x1

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
6
TEC600
This symbol denotes a 2- or 3- Person Task. For safety, please ensure that there are the
suggested number of people working on steps displaying this symbol.
Watch for this symbol throughout the Assembly Guide. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done
correctly.
The star symbol highlights an advisory note.
Watch for These Helpful Symbols
Before You Begin
As You Assemble the Unit
Lay out and identify all of the included parts.
The hardware has been packed according to step.
Read the assembly guide over once to familiarize yourself with them.
Please note that in its unassembled state, this product contains parts that can be
hazardous to small children. This product should be assembled by an adult.
Follow the steps in sequence.
Before beginning each step, find the part(s) that you need for that step.
Pay attention to the labels on the parts; they are there to help direct you at certain stages.
The title of each step states what you will be doing. Review the text and the pictures as you build the unit.
?
?
?
2-Person Task 3-Person Task
Tips for Assembly
Customer Service - FAQ’s
For missing parts and other issues regarding this product:
Please call Copernicus Customer Service, where we will be happy to help.
1-800-267-8494. Monday - Friday 8:30am - 4:30 pm EST.
OR
Email our Tech Support Service at [e-mail]
Need Tech Support?
Have a Question?
Email our Tech Support Service
www.copernicused.com
Check out some of our
other great products!

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Power Strip
x1
C
2
You will need: (Not to Scale)
Actual Size:
Power Strip
Bracket
x2
Install Carriage Bolts on Power Strip and Mount to Power Strip Brackets
1
You will need: (Not to Scale)
Actual Size:
®
Tech Tub
x1
Cable Hook
x2
M4 Wing Nut
x4
A
Install Cable Hooks
AA
Tighten fully
Note orientation
of cable hooks
1
M4 x 14mm Carriage Screw
x4
C
M4 Flat Washer
x4
D
2
D
B
A
B
B
M4 Lock Washer
x4
B
Hold bracket in place
while tightening hardware.
Tighten fully.
Keep your power strip upside
down as shown. This will make
the assembly easier!
Power strip
cord end
Pay close attention to
orientation of power strip.
7
M4 Lock Washer
x4
B
M4 Wing Nut
x4
A

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
3You will need: (Not to Scale)
Assemble Power Strip on Divider
1 2
Actual Size:
Divider
x1
Make sure snaps (x4)
are fully connected
Bracket hooks fit
into recess.
Do not hook brackets
below second rail.
Install Power Strip
Run power strip cable
out of the bottom
back hole.
Use the 5th slot
when positioning
your power strip.
Make sure
divider tab
is pushed
down fully.
Pull power strip cable out of the
Tech Tub® completely. This will
make the installation of the power
strip easier!
8
4

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Wrap Power Strip Cable
6
Note:
Padlock will not
lock without key
1 2
Lock Lid with Padlock
You will need: (Not to Scale)
Padlock
x1
Plug cable directly into wall outlet.
DO NOT PLUG THIS POWER STRIP INTO ANOTHER POWER STRIP.
Install Dividers
5You will need: (Not to Scale)
Divider
x5
Make sure divider tabs
are pushed down fully.
Use your devices to setup the spacing in between your
dividers. Using a smaller storage space for your device will
minimize your device’s movement during transport. Don’t
forget to leave extra room if you have a case!
9
Small or No Case
1 Groove Between Dividers
Large Case
2 Grooves Between Dividers
7

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
E
Use Template and Drill Holes into Surface
8You will need: (Not to Scale)
9
You will need: (Not to Scale)
Actual Size:
Locking Block
x1
M6 x 70mm
x2
G
M6 Lock Nut
x2
F
OPTIONAL:
Positioning Template (found at
back of this guide)
x1
Allen Key 4mm
x1
®
Follow Steps 8 to 10 to install the Tech Tub Locking
Block and Locking Pin System
Mount Locking Block
Drilled holes from Step 6
G
E
F
Underside
Label facing
upwards
E
Table or Countertop
Section
View
F
G
EWasher goes
INSIDE tube
EWasher goes
UNDER tube
E
E
Use positioning template
found at back of these
Assembly Instructions
Use 1/4” or 6mm drill bit
Maximum thickness of
surface is 2-1/2” (63mm)
Table or Countertop
Use tape to secure
the positioning template
This system allows you to lock your Tech Tub® to a
table or countertop. This is a really good idea if you
leave your devices out in the open or your room
doesn’t lock. Once the Tech Tub® is secured in place
you can lock the tub lid to secure your devices.
10
EM6 Washer
x6

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
You will need: (Not to Scale)
Lock the Tech Tub with Locking Pin
®
10 Locking Pin
x1
12
3 4 Secure Locking Pin with Padlock
on other side.
Key
x3
11
Padlock
x1
Push Tech Tub onto Locking Block
® Push Tech Tub all the way back until the ®
Locking Block is completely in channel.
Slide Locking Pin through hole on
Tech Tub®
OPTIONAL: ®
Follow Steps 8 to 10 to install the Tech Tub Locking
Block and Locking Pin System

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Cable Management
Charging port of device should be
facing upwards or near the top.
1Arrange your Tech Tub with all of your devices and adapters.
®
2
Start with the
device at the back.
Plug cable into power adapter and first device.
Insert cable into
aligned slot Make
sure it snaps into
place.
Run cable through
side recess
12

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Cable Management
Store excess cable into Cable Management Pocket.
13
1Repeat Steps 1-3 for the remaining devices.
5
Repeat Steps 1-3 for the second device.
14
Once you have your cables set up, close the lid
of your Cable Management Pocket
13

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Tips for Use
Device Management
Keeping track of your devices can be made even easier by creating
a sign-out program.
There are many automated software solutions available that make
setting up and running a device check-out program very easy.
Here is a list of some companies and their products:
®
ResourceMate - www.resourcemate.com
Neuton Data Systems - www.neuton.net
IntelliScanner - www.intelliscanner.com
Does your school already use an automated system to keep track of books?
You could use this system to also keep track of your devices!
Use a barcode and
scanner for identifying
your devices.
®
Carrying your Tech Tub
®
Use the Handles along the sides of the Tech Tub for easy lifting and carrying.
Handle
Handle
Handle
Handle
14

TEC600 - Version A - Released May 5, 2017 - Copernicus Educational Products Inc.
M4 x 14mm
Carriage Screw
x4
C
M4 Wing Nut
x8
A
M6 x 70mm
Screw
x2
G
M6 Lock Nut
x2
M6 Washer
x6
Allen Key 4mm
1x
M4 Flat Washer
x4
D
F
M4 Lock Washer
x8
B
Hardware
Actual Size
Hinge Side
Snap Side
Drill here
Drill here
®
Snap Side of Tech Tub
Hinge Side of Tech Tub
Leave a minimum of 15-1/2” (395mm)
of space from Locking Block
Leave a minimum of 15-1/2” (395mm)
of space from Locking Block
Leave a minimum of 11” (280mm)
of space from Locking Block
Leave a minimum of 4” (102mm)
of space from Locking Block
15
Mounting Template
®
Tech Tub