Corewise CP810 User manual

CP810 User Manual
http://www.corewise.cn
2014
1
USER MANUAL
CP810
Nanjing Corewise Smart Technology Inc.
Support
Hotline: [phone]
Skype: xiafan_max (software), cruise.xiao (hardware)
E-mail: [email protected]

CP810 User Manual
http://www.corewise.cn
2014
2
Profile Picture
Pictorial Illustrations

CP810 User Manual
http://www.corewise.cn
2014
3

CP810 User Manual
http://www.corewise.cn
2014
4
Operational Guide of Assembling Mobile Phone Into Base:
1) Press DOWN of the button until mobile phone inserted into its right place.
2) This is the right way of inserting mobile phone.
3) Release button and check if mobile phone is locked to the button. If not, repeat
step 1) and 2).

CP810 User Manual
http://www.corewise.cn
2014
5
Operational Guide of Unplugging Mobile Phone Out of Base:
1) Press DOWN of the button until mobile phone is unplugged out of the base
machine.
2) Unplugging the mobile phone out of the base machine.
3) Release the button.

CP810 User Manual
http://www.corewise.cn
2014
6
Operational Guide of Inserting Printing Paper:
1) Open cover of printer compartment, put paper roll inside.
2) Press F1 (paper rolling) button and check if paper goes smoothly.

CP810 User Manual
http://www.corewise.cn
2014
7
Operational Guide of Testing RFID Function:
1) Ensure mobile phone is communicating fine with base machine, and then enter
into DEMO software, select RFID button.
2) Put RFID smart card in the place as shown below.
3) Select “Read” function, information will be shown on the screen.
身份证

CP810 User Manual
http://www.corewise.cn
2014
8
Operational Guide of Testing Fingerprint Function:
1) Ensure mobile phone is communicating fine with base machine, and then enter
into DEMO software, select Fingerprint button.
2) Press your finger on the sensor, finger tip should touches the metal frame.
3) Select “Read” function, information will be shown on the screen.
Operational Guide of Testing IC Card Function:
1) Ensure mobile phone is communicating fine with base machine, and then enter
into DEMO software, select IC Card button.
2) Insert IC card (with chipset side) into the base machine.
3) Select “Read” function, information will be shown on the screen.

CP810 User Manual
http://www.corewise.cn
2014
9
Technical Specifications
Dimensions
220 x 92 x 49(mm) (8.7" x 3.7" x 1.9")
Weight
0.5Kg (1.1lbs) with batteries
3G
WCDMA R99: maximum data rate of 384 kbps, 2100Mhz
GSM R99: Supports CS SMS, 900/1800Mhz
GPRS : CS schemes –CS1, CS2, CS3, and CS4
EDGE : Downlink coding schemes –CS 1-4, MCS 1-9
CDMA 1X 2000/EVDO 800Mhz
CPU
Qualcomm MSM 8625, Dual Core, 1.2GHz
Internal Memory
4GB Nand Flash ROM + 4Gb LPDDR RAM
External Storage
T-Flash/Micro SD card, up to 32 GB
Operating System
Google Android 4.0.4
Display
TFT LCD 5 inch, sunlight readable, capacitive touch screen
with resolution: 480 x 800
Camera
Front 0.3M, rear 5.0M, LED, auto focus
Network Interface
Integrated WLAN 802.11 b/g, integrated Bluetooth 2.1
EDR, 10m
GPS
Supported, 10m
USB
Mini USB 10-pin, OTG supported
UART & RS232
Supported
Battery
DC 3.7V, 2500mAh/DC 7.4V, 5000mAh
Features
58mm standard thermal printer
IC Card
Contact IC card, ISO 7816-3
MSR
2 tracks supported
Build-in biometric fingerprint sensor, capacitive touch
screen, 508 DPI, registration/matching/verification<1s
HF RFID 13.56Mhz, ISO/IEC 14443 A, ISO/IEC 14443 B, ISO
15693, 3-5cm reading range

CP810 User Manual
http://www.corewise.cn
2014
10
Functionalities
Fingerprint Sensor
TCS2SS
TCS1ST
Picture
Vendor
AuthenTec Inc. (On 27 July
2012, AuthenTec was acquired
by Apple Inc.
AuthenTec Inc. (On 27 July 2012,
AuthenTec was acquired
by Apple Inc.
Size
10.4*14.4mm array (imaging
area)
12.8*18.0mm array (imaging
area)
Type
Capacitive touch chip
Capacitive touch chip
DPI
208*288pixel array, 508DPI,
8bits per pixel
256*360pixel array, 508DPI,
8bits per pixel
Lifetime
4M finger placements
4M finger placements