1LAN-SDAN-8293
Software Defined
Access Node
Quick Installation Guide
QUICK INSTALLATION SHEET I SDLAN-000-8293 I APRIL 2018 I Page 3
2 USING SURFACE MOUNT
CRADLE (1LAN-SDAN-SMCRD) |
Using 2 screws provided, attach cradle to
mounting surface using two screw holes in
back of cradle.
Figure 2 ONT Surface Mount Cradle
Figure 3 Fiber routing guide
Figure 4 ONT Surface Mount Cradle
Step 2
If entering the cradle from side, remove
appropriate round knockout plate and attach
entry grommet.
Step 3
If entering cradle from the back, route cable
into cradle securely from back entrance
opening.
Step 4
Route cable inside cradle in a manner that
maintains bend radius and prevents cable
from being pinched or damaged using
routing guides.
Step 5
Terminate fiber and copper using selected
method (See Sections 3 and 4).
Step 6
Secure fiber into routing guide and connect
to fiber input port.
Step 7
Connect power connection to power Port.
Step 8
Place ONT over cradle aligning screw holes
and making sure cables are routed securely
and are not pinched or damaged.
Step 9
Using ONT mounting screws attach ONT to
mounting cradle and secure with screws.
