2 www.AvantcoEquipment.com
Index
Parts Overview .............................................................. 3
Standard Accessories .................................................... 4
Operation Instructions .................................................. 4
Figure 1: Gear Axle ........................................................ 5
Figure 2: Initiative Axle .................................................. 6
Figure 3: Fork ................................................................. 7
Figure 4: Change Speed Axle ........................................ 8
Figure 5: Turning Plate and Mixing Axle ....................... 9
Figure 6: Single Phase Motor Diagram ....................... 10
Figure 7: Center Axle ................................................... 11
Maintenance and Protection ........................................ 12
Troubleshooting ........................................................... 13
Warranty Information ................................................... 13
IMPORTANT SAFEGUARDS
1. When using electrical appliances, basic safety precautions should always be followed including the
following:
2. Read all instructions.
3. Close supervision is necessary when any appliance is used by or near children.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair or electrical or mechanical adjustment.
injury.
8. Do not use outdoors
9. Keep hands, hair, clothing, as well as spatulas and other utensils away from beaters during operation to
reduce the risk of injury to persons, and/or damage to the mixer.
SAVE THESE INSTRUCTIONS
Cleaning ........................................................... 13
Cleaning and Maintenance
7
Observe the ambient temperature
The appliance is suitable for an ambient temperature ranging between 16°C - 32°C.
Cleaning
For health standard and good quality of beverages, clean tanks, lids and the mixing paddles / pumps
as often as possible.
Caution: Do not clean the appliance by water jet.
3. Use neutral soap and a little warm water to wash container, lid, mixing paddles/pump, refrigerator
tank and tap. Rinse carefully with water in order to remove any soap residue.
deposits forming.
5. Pour out the waste water in waste liquid reservoir and clean it as often as possible.
Caution:
Do not use any organic solvents (petrol, alcohol, etc.) for cleaning the appliance. The case of the
appliance may be damaged and explosive vapours may develop. Do not use any sharp edged
objects for cleaning.
The appliance may be cleaned with a damp towel, but may never be immersed in water.
After cleaning the appliance make sure that it will be dried completely.
Beverage Temperature Adjustment (FIG.5)
4. The motor and stirrer for each bowl can be operated
independently using the relevant switch on the right hand
side of the unit.
5. To switch off the cooling to a selected bowl, press the
relevant bowl number on the control panel for 3 seconds.
The letters “OFF” will display for the bowl number selected.
To turn on the cooling press and hold for 3 seconds.
