Cortelco 2705 Setup guide

1
OWNER’S
INSTRUCTION MANUAL
CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
MODEL 2705

2
THANK YOU
FOR PURCHASING THE
2705 CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
We want you to know all about your new Telephone, how to install it, the
features it provides, and the services you can expect from its use. We have
included this information in your Owner’s Instruction Manual.
PLEASE READ BEFORE INSTALLING
AND USING YOUR NEW TELEPHONE EQUIPMENT.

3
Table Of Contents
IMPORTANT SAFETY INSTRUCTIONS .................................................................. 5
TELEPHONE PART IDENTIFICATION ..................................................................... 7
INSTALLATION ...................................................................................................... 8
DESK MOUNT ..................................................................................................... 8
WALL MOUNT ....................................................................................................... 8
ANSWERING MACHINE ....................................................................................... 8
MESSAGE WAITING LAMP ................................................................................... 8
OPERATION WITH PLANTRONICS™ WIRELESS HEADSETS ............................ 9
UNIT SETUP ........................................................................................................ 11
TELEPHONE FEATURES .....................................................................................13
DIALING ..............................................................................................................13
RECEIVING APHONE CALL ...............................................................................13
PLACING APHONE CALL ...................................................................................13
PREDIAL .............................................................................................................13
SPEAKER BUTTON ............................................................................................13
DURATION COUNTER .......................................................................................14
MUTE BUTTON ...................................................................................................14
AUTOMATIC MEMORY........................................................................................14
VOLUME BUTTON ..............................................................................................14
REDIAL BUTTON ................................................................................................14
PAUSE BUTTON .................................................................................................15
HOLD BUTTON ...................................................................................................15
FLASH BUTTON .................................................................................................15
HEADSET BUTTON ............................................................................................ 15
CORDED HEADSET ........................................................................................... 15
DATA PORT......................................................................................................... 16
CONTRAST BUTTON .........................................................................................16
RELEASE BUTTON ............................................................................................ 16
VOICEMAIL BUTTON .......................................................................................... 16
DIRECTORY BUTTON ....................................................................................... 16
MESSAGE LIGHT ................................................................................................16
MESSAGE WAITING ...........................................................................................16
CALLER ID FEATURES ........................................................................................18
CALL WAITING DISPLAY..................................................................................... 18
RECEIVING CALLS .............................................................................................18
REVIEWING CALLS ............................................................................................18
DELETING CALLS ..............................................................................................18
CALLBACK .........................................................................................................19

4
7-10-11 BUTTON ...............................................................................................19
MESSAGE ERROR ............................................................................................. 19
NO DATA SENT ...................................................................................................20
PRIVATE CALLS .................................................................................................. 20
UNKNOWN CALLS .............................................................................................20
USING THE DIRECTORY ......................................................................................21
TELEPHONE SERVICE PROBLEMS .................................................................... 22
MAINTENANCE INFORMATION ...........................................................................23
TELEPHONE REPAIR ..........................................................................................24
FCC INFORMATION .............................................................................................25
LIMITED WARRANTY .......................................................................................... 26

5
IMPORTANT SAFETYINSTRUCTIONS
Always follow basic safety precautions when using your telephone equipment
to reduce the risk of fire, electrical shock, and injury.
1. Read and understand all instructions in the Owner’s Instruction Manual.
2. Read all warnings and follow all instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a damp cloth
for cleaning. Do not use liquid or aerosol cleaners.
4. Do not use the telephone near water. For example, do not use near a
bathtub, wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet
basement.
5. Do not place this product on an unstable cart or stand. The product may
fall causing serious damage to the product.
6. Use only the type power source indicated on the label. If you are not sure
of the type power supply to your home, consult your dealer or local power
company.
7. Do not place any objects on the telephone line cord. Do not locate the
telephone where the line cord will be walked on.
8. Do not block or cover ventilation slots and openings in the bottom of the
telephone. The openings should never be blocked by placing the telephone
on a bed, sofa, rug, or other similar surfaces. The telephone should never
be placed near or over a radiator or heat register. The telephone should never
be placed in a built-in installation unless proper ventilation is provided.
9. Never spill liquid on the telephone or push objects of any kind through
ventilation slots. Liquid or objects may touch dangerous voltage points or
short out parts that could result in a risk of fire or electrical shock.
10. Do not disassemble this product. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect reassembly can cause
electrical shock when the product is subsequently used.
11. Do not overload outlets and extension cords. Some telephones require AC
power from an outlet. Overloading the outlets can result in the risk of fire or
electric shock.
12. Avoid using a telephone during a local thunderstorm.There may be a
remote risk of electrical shock from lightning. Fuse (F1) is rated at 0.75A/250V
Time Delay.

6
13. Do not use a telephone to report a gas leak in the vicinity of the leak.
14. Unplug the telephone from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•When the line cord is frayed or plugs damaged.
•If liquid has been spilled into the telephone.
•If the telephone has been exposed to rain or water.
•If the telephone does not operate properly by following the operating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•If the telephone has been dropped or the housing damaged.
•If the telephone exhibits distinct change in performance.
Caution: Always disconnect all telephone lines from the wall before servicing
or disassembling the equipment.
SAVE THESE INSTRUCTIONS

7
TELEPHONE PART IDENTIFICATION
1Menu Button 16 Headset Jacks
27-10-11 Button 17 Redial Button
3Directory Button 18 Headset Button with LED
4Save Button 19 Flash Button
5Message Lamp 20 Mute Button with LED
6Multi-Angle LCD 21 Hold Button with LED
7Delete Button 22 Release Button
8Contrast Button 23 Speaker Button with LED
9Dial Button 24 Pause Button
10 Voice Mail Button 25 Edit Button
11 Wireless Headset Jack 26 Volume Up/Down Button
12 Review Up/Down Button 27 Handset Jack
13 Directory/Logo Strip 28 Speaker
14 Shift Button 29 Handset Hook
15 5 Auto Memory Buttons 30 Hook Switch

8
INSTALLATION
DESK MOUNT
1. Select the desired viewing angle and install the desk stand. The desk stand
can be installed in two positions to give a choice of viewing angle.
2. Connect the power adapter. The power adapter connects to the jack marked
DC 9V on the bottom of the phone. Plug the large part of the adapter into the
wall outlet. Use only a 9V DC. 200mA or 300mA, center positive Class 2
adapter.
3. Connect the line cord. The line cord conncects to the jack marked LINE on the
bottom of the phone..
4. Plug the coiled cord into the handset jack, and then plug the other end of the
cord into the base.
5. Place the handset on the base.
WALL MOUNT
1. Remove the desk stand. The unit will then mount directly on a standard wall
telephone jack.
2. Connect the power adapter and the line cord. See Steps 2 and 3 above.
3. Rotate the handset hook into the wall mount position.
4. Plug the coiled cord into the handset, and then plug the other end of the cord
into the base.
5. Place the handset on the base.
ANSWERING MACHINE
1. Connect the LINE jack of the answering machine to the wall telephone jack.
2. Connect the LINE jack of the model 2705 phone unit to the PHONE jack of
the answering machine.
3. Set the answering machine to answer after 2 or more rings.
MESSAGE WAITING LAMP
If your phone is installed behind a Message Waiting enabled PBX, you will need
to set the M/W switch in order to receive Message Waiting indication.
1. Locate the switch on the bottom of the telephone.
2. For 90V PBX Message Waiting Indication, move the switch to the position marked
“90V”. For 24V PBX Message Waiting Indication, move the switch to the posi
tion marked “24V”. If connecting directly to telephone lines, move the switch to
the center “OFF” position.

9
Warning: Setting this switch in a position other than OFF can cause this phone to
function incorrectly. When enabled, this feature is for PBX systems, and not meant
for direct Central Office (CO) interface. If connecting to CO telephone lines, make
sure this switch is set to OFF.
OPERATION WTTH PLANTRONICS™WIRELESS HEADSETS
The 2705 telephone is designed to work with Plantronics™wireless head-
sets. Any Plantronics™headset that can control a Plantronics™handset lifter
can be controlled by the 2705. Here are the steps for installation with a
Plantronics™headset.
1. Configure the 2705 as described in the Installation section of this
Users Guide. Verify that the phone will make and receive calls in both
handset and speaker phone modes.
2. Unpack and configure the Plantronics™headset as described in the
Plantronics™User Guide. Note: For correct operation, the headset
batteries must be fully charged.
3. Note: Be sure the Plantronics™headset power adapter is connected
to the wall outlet before continuing. Plug the phone cable (supplied
with Plantronics™headset) into the telephone cord jack on the
headset base. See drawing on following page. Please note that this
cable may already be installed.
4. Plug the other end of the phone cable into the HEADSET jack of the
2705.
5. Plug the headset control cable (supplied with 2705 telephone) into
the Headset Lifter Jack on the headset base. Use the right angle end
of the cable.
6. Plug the other end of the headset control cable into the WIRELESS
HEADSET jack on the 2705.
Message Waiting Switch Location

10
7. Remove the headset from the base and press the Call Control
Button. The HEADSET button on the 2705 should light, and you
should hear dial tone.
8. Make a test call. Verify that you can talk and listen on the headset.
You may need to make adjustments to the speaking or listening
volume as described in the Plantronics™User Guide.
9. Press the Call Control Button again. The call should be disconnected.
10. Place a test call to the 2705 while wearing the headset. You should
hear audible ringing indication on the headset.
11. Answer the call by pressing the Call Control Button. Verify talking and
listening volume. Press the Call Control Button again to disconnect.
Plantronics™Headset Base
Handset Lifter Jack
AC Charging Jack
Telephone Cord Jack

11
UNIT SETUP
FACTORYPRESETS
The following table shows the default factory settings:
Display Setting
LANGUAGE .............................................................................. English
STUTTER TONE .............................................................................. No
AREA CODE ....................................................................... No Setting
LDS CODE ........................................................................................ 1
TIME & DATE ...................................................................... No Setting
FLASH TIMER .......................................................................... 600 ms
RINGER CADENCE .......................................................................... 3
RINGER VOLUME ............................................................................. 5
VOICEMAIL NUMBER ......................................................... No Setting
#3 SEC PAUSES ................................................................ No Setting
VM PASSWORD .................................................................. No Setting
HOLD MODE ............................................................................ Normal
RELEASE MODE .................................................................. New Call
Note: After the unit has been completely configured for the first time, use MENU
to review or reprogram the features.
After the adapter is connected, the display will show as indicated below for setting.
1. [SELECT LANGUAGE]appears on the display. Press REVIEW UP to select
the language. ENG - English, ESP - Spanish, FRE - French, and then press
MENU to confirm the selection.
2. When [ENTER AREA CODE] appears, enter the desired area code using
the keypad. Use REVIEW UP and REVIEW DOWN to skip a digit. Press
MENU to confirm area code. Follow the same procedure for both area code
settings. To leave an area code blank, press MENU without entering digits.
3. When [SET LDS CODE] appears, enter the desired LDS code using the
keypad. Press MENU to confirm the selection.
4. When [EDIT TIME & DATE]appears, enter the time using the keypad.
Press REVIEW UP and REVIEW DOWN to select AM or PM. Enter the date
using the keypad. Press MENU to confirm the settings.
Example: To enter 8:35 AM, enter 0835 and then press REVIEW UP to skip
to the date because the time is AM by default.
5. When [FLASH TIMER (MS)] appears, press REVIEW UP to toggle between
600ms, 100 ms, and 300ms. After selecting the desired flash time, press
MENU to confirm selection.

12
6. When [RINGER CADENCE] appears, the default setting is 3. To alter this
setting, press REVIEW UP. There are 10 ringer cadences and each one will
be played as you scroll through them. After the desired ringer cadence is
displayed, press MENU to confirm selection.
8. When [RINGER VOLUME] appears, the default setting is 5. To alter the
ringer volume, press REVIEW UP.There are 7 ringer volume levels and
each one will be played as you scroll through them. To turn the ringer off,
select [OFF] in the Menu. After the desired ringer volume level is dis-
played, press MENU to confirm selection.
9. When [VOICEMAIL NUMBER] appears, enter the voicemail number
(maximum of 18 digits) using the keypad. To delete a number or digit,
press REVIEW DOWN to erase the number(s). After the desired number
has been entered, press MENU to confirm selection.
10. When [#3 SEC PAUSES] appears, enter the desired number of pauses
using the keypad. After the desired setting has been entered, press MENU
to confirm selection.
11. When [VM PASSWORD] appears, enter the desired password using the
keypad (maximum of 5 digits). To delete a number or digit, press REVIEW
DOWN to erase the number(s). After the desired number has been entered,
press MENU to confirm selection.
12. When [HOLD MODE]appears on the display. Press REVIEW UP to select
either NORMAL or PBX. In NORMAL mode, the HOLD button activates a local
hold function. This can be released at any parallel phone. In PBX mode, the
HOLD button dials a code which places a PBX line on hold. If you select PBX
mode, see Step 15 to program the code.
13. When [RELEASE MODE]appears on the display. Press REVIEW UP to select
either NEWCALL or HANGUP. In NEWCALL mode, the RELEASE button
provides a 1.5 second line break. This will ensure that the line is clear and a
new call can be dialed. In HANGUP mode, the RELEASE button drops the
line and a new connection is not made. This is primarily intended for pro-
gramming into speed dial locations.
14. When [SDT TIME]appears on the display, press REVIEW UP to change Stutter
Dial Tone timing. Please note that the default setting of 1700 mSec is correct
for most applications.
15. This only applies if you have selected PBX HOLD mode.
a. Press SAVE. The display shows [SAVE TO ?]
b. Press HOLD. The display shows [ENTER NUMBER >]
c. Dial the code using the keypad.
d. Press SAVE.

13
TELEPHONE FEATURES
DIALING
The 2705 is only capable of DTMF dialing. It is not capable of pulse dialing.
RECEIVING A PHONE CALL
1. When the phone rings, lift the handset or press SPEAKER to begin your
conversation.
2. To change the Ringer Volume, refer to the “Factory Presets” section.
PLACING A PHONE CALL
1. Lift the handset or press the SPEAKER button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the
display window.
PREDIAL
1. While the handset is on hook, enter the desired telephone number using the
key pad. The number will appear in the display. To delete a digit or the entire
number, press REVIEW DOWN.
2. To dial the displayed number, lift the handset, press SPEAKER or DIAL.
SPEAKER BUTTON
NOTE: Power Adapter must be used to ensure proper function
1. Receiving Incoming Calls
a. When the phone rings, press and release SPEAKER and speak
normally into the built-in microphone from a distance of 5-6 inches.
b. You can adjust the volume of the caller’svoice by by pressing the Volume
Button on the base of the telephone.
c. After the conversation has finished, press and release SPEAKER to hang
up.
2. Making A Call
a. Press and release SPEAKER.
b. When you hear a dial tone, dial the number or press the auto memory
button. The number will appear on the display window.
c. When your party answers, adjust the volume of the conversation by press
ing the Volume Button on the base of the telephone.
d. After the conversation has finished, press and release SPEAKER to hang
up.
Note:
1. If you wish to switch from speakerphone to handset, simply lift the handset.
2. If you wish to switch from handset to speakerphone, press and release
SPEAKER and then hang up the handset.

14
DURATION COUNTER
Abuilt-in counter will start counting 6 seconds after you lift the handset or 6
seconds after you dial a telephone number.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation.
The MUTE Indicator will light up and remain lighted until you resume your conver-
sation. Also,“MIC MUTED” will show in the display. To resume the conversation,
press MUTE. The MUTE indicator will go out and your call can continue.
AUTOMATIC MEMORY
Storing A Number
1. Press SAVE, [SAVE TO?]appears on the display window.
2. Press the desired memory location. (M1-M5 or SHIFT M1-M5)
3. [ENTER NUMBER>]appears on the display.
4. Enter the desired number using the keypad (maximum of 24 digits). Press
SAVE to confirm.
5. [ENTER NAME>] will appear. Type the name (16 characters max.) using the
keypad. Use REVIEW UP to add a space. Use REVIEW DOWN to delete a
character. Press SAVE again.
6. [SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN to select the
desired ring cadence. Press SAVE again.
7. [MEMORYSTORING] will show briefly.
Note: The memory locations can be chained together to store longer numbers.
Dialing A Number
1. Press the desired memory location (M1-M5 or SHIFT M1-M5)
2. The number will be displayed.
3. To dial the number, lift the handset, press SPEAKER or press DIAL.
VOLUME BUTTON
Abuilt-in amplifier feature allows you to change the listening volume in the re-
ceiver of the handset when speaking with your party. Press VOLUME UP or VOL-
UME DOWN to achieve different levels. The volume remains the same between
calls. It does not return to a nominal level.
REDIAL BUTTON
1. To redial one of the last 10 numbers dialed, press REDIAL. The display
will show the last number dialed. To scroll through the last 10 numbers,
press REVIEW UP or REVIEW DOWN.
2. After the desired number is selected, dial the number by pressing REDIAL
again, lifting the handset, pressing SPEAKER or pressing DIAL.
3. The selected number (32 digits maximum) will be redialed.

15
PAUSE BUTTON
PAUSE allows you to insert a 3.6-second pause in the dialing sequence. This is
particularly useful if you are connected to a PABX system where you must dial an
access code (usually the number 9) to obtain an outside line.
1. Press PAUSE and release at any point in the dialing sequence where a
pause is desired.
2. PAUSE can be pressed more than once to create a longer pause.
HOLD BUTTON
1. NORMAL MODE
a. Press HOLD and hang up the handset. HOLD will light up and remain
lighted until you resume your conversation.
b. To resume your conversation, lift the handset or that of any extension
phone on the same line or press and release SPEAKER. The HOLD
indicator will go out and your call can continue.
2. PBX MODE
Press HOLD. The phone will dial out the code. Depending on the PBX, it
may now be necessary to hang up the handset. Note that HOLD will not
light in this mode.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX service or for use
of Call Waiting from your local telephone company. If you have Call Waiting ser-
vice, you can use the Call Waiting function per the following instructions.
1. While having a conversation, another party calls and you hear a tone.
2. Press FLASH once and release. The first conversation is placed on hold and
the second call can be answered.
3. Press FLASH again and release. You may speak to the first caller again and
the second call is placed on hold.
HEADSET BUTTON
The HEADSET button can control the interface to either a corded or wireless
headset. See instructions in INSTALLATION section for operation wtih Plantronics™
wireless headsets.
CORDED HEADSET
This telephone will accept either a 2.5 mm cell phone-style headset or an RJ
type headset. Press HEADSET to connect and disconnect from calls.

16
DATA PORT
This is a connection which is in parallel with the telephone line. It allows the
connection of a device such as a modem, caller ID, or an answering machine.
This connection is located on the bottom of the phone and is marked DATA.
CONTRAST BUTTON
Contrast can be altered whether on hook or off hook by pressing CONTRAST.
There are 3 contrast levels.
RELEASE BUTTON
To end a conversation, press RELEASE once. There are two modes for RELEASE.
1. NEW CALL
In NEW CALL mode, the phone goes on-hook for 1.5 seconds and then goes
off hook again. This allows you to make another call.
2. HANG-UP
In HANG UP mode, the phone does not come back off hook. This allows you
to program a RELEASE into a speed dial location.
VOICEMAIL BUTTON
Press VOICEMAIL to dial the voicemail access number and pin. See Unit Setup
section for details.
DIRECTORY BUTTON
DIRECTORYis used to store the name and number of up to 99 of your most
frequently dialed contacts. The names are sorted alphabetically.
MESSAGE LIGHT
If you have a voice mail service with your telephone company, the large indicator at
the top of the display will flash red to alert you that you have new messages.
The MESSAGE indicator also monitors the unit’s situation. When the phone is in
use, the MESSAGE indicator will be on continuously. When the phone is ringing,
the indicator will flash quickly.
MESSAGE WAITING
This unit’s MESSAGE WAITING DETECTION is for both FSK and Stutter Dial Tone
(SDT) systems.
1. FSK
The MESSAGE indicator will flash and [MESSAGE WAITING] will appear on
the display for 20 seconds when a message waiting signal is received
from the Central Office.

17
2. SDT
This unit will check your line for a stutter dial tone every time you hang up
or each time a call goes unanswered. The MESSAGE indicator will flash if
a stutter dial tone is detected. There may be some delay in lighting the
MESSAGE indicator. This delay is due to regulatory matters and does not
indicate a problem with the unit.
This unit may not be activated or deactivated under certain conditions. For ex-
ample, when you retrieve messages from an outside phone (not your own tele-
phone number), the MESSAGE indicator may not be canceled when you return
home. If you experience this situation, pick up the handset and hang up. The
MESSAGE indicator will cancel.

18
CALLER ID FEATURES
CALL WAITING DISPLAY
Call-waiting service alerts you to a new call by playing a tone while you are on a
call. Call Waiting Caller ID not only tells you there is another call waiting, but lets
you know who the caller is before the call is answered. The name and number of
the incoming call will be shown on the unit’s display. This infomation will remain
displayed for 16 seconds. In addition to this, the CALL WAITING symbol (CW) will
flash.
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will
show the NEW symbol, the phone number, the caller’s name, and the call
time for 16 seconds. The REPEAT symbol will appear if the call has come in
more than once.
2. After 16 seconds with no activity, the display will default to the Stand-By screen
until another call is received or a button is pressed.
REVIEWING CALLS
1. When in Standby Mode, press REVIEW UP or REVIEW DOWN to see the
stored calls. This unit stores up to 99 calls.
2. The NEW symbol will be removed from each call after it is reviewed.
3. The reviewed number can be stored into any of the auto memory buttons:
a. With the number displayed, press SAVE.
b. [SAVE TO ?] will appear. Press M1-M5 or SHIFT M1-M5. Press
SAVE again.
c. The caller’s name will appear. Press SAVE again.
d. [SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN
to select the desired ring cadence. Press SAVE again.
4. When the end of the call records is reached, the display will show [-END
OF LIST- ].
DELETING CALLS
Individual call
1. Display the desired record by pressing REVIEW UP or REVIEW DOWN
2. Press DELETE. The display will show [DELETE? 1:YES 2:NO].
3. Press 1 to confirm the deletion.
All calls
1. Display the desired record by pressing REVIEW UP or REVIEW DOWN
2. Press and hold DELETE for more than 3 seconds. The display will show
[DELETE ALL 1:YES 2:NO].
3. Press 1 to confirm the deletion.

19
CALLBACK
When reviewing received calls, there are two ways to dial the telephone numbers
shown on the display by pressing DIAL.
1. If you have reviewed the calls with the telephone handset on hook, press
DIAL. The HANDSET symbol in the display will come on, and the number you
have selected will be dialed automatically via the speakerphone.
2. If you have already picked up the handset or activated the speakerphone, you
may select the number to be dialed by reviewing the stored calls. After locat-
ing the desired number, press DIAL. The displayed number will be dialed
automatically.
7-10-11 BUTTON
7-10-11allows you to change the format of the displayed number. These are
the available formats:
7-digit 7-digit telephone number.
10-digit 3-digit area code + 7-digit telephone number.
11-digit long distance code 1 + 3-digit area code + 7digit telephone number.
If a local call, and its 7-digit number is displayed:
•Pressing 7-10-11once will change it to a 10-digit format (your area code +
7-digit number).
•Pressing 7-10-11twice will change it to an 11-digit number (1 + your area
code + 7-digit telephone number).
•Pressing 7-10-11three times will go back to the original 7-digit telephone
number.
If a long distance call, and its 10-digit number is displayed,
•Pressing 7-10-11once will remove the 3-digit area code and change it to a
digit number.
•Pressing 7-10-11twice will go back to the original 10-digit number.
•Pressing 7-10-11three times will add the LDS code to the number. (1+ 3-
digit area code + 7-digit telephone number).
When the desired format of the telephone number is reached, press DIAL to
dial the displayed number.
MESSAGE ERROR
The display shows [-MESSAGE ERROR-]if your unit receives a call that has an
error in the transmission or reception.

20
NO DATA SENT
The display shows [-NO DATA SENT-] if there is no caller ID (CID) number sent
from the telephone company.
PRIVATE CALLS
•If the caller has exercised the option to block his number from being sent,
[PRIVATE NUMBER]and his name will alternately display on the screen.
•If the caller has exercised the option to block his name from being sent,
[PRIVATE NAME] and his telephone number will be displayed on the
screen.
•If the caller has exercised the option to block his name and number from
being sent, [PRIVATE CALLER] will be displayed on the screen.
UNKNOWN CALLS
•When the telephone company is unable to provide the caller’s telephone
number, [UNKNOWN CALLER] and his name will alternately display on the
screen.
•When the telephone company is unable to provide the caller’s name,
[UNKNOWN NAME]and his telephone number will be displayed on the screen.
•When the telephone company is unable to provide the caller’s name
and number, [UNKNOWN CALLER]will be displayed on the screen.