Cosmic Byte CosmoBuds X100 User manual

User Manual
TRUE WIRELESS GAMING EARBUDS
CosmoBuds
X100

40 HOURS
PLAYBACK TIME
FUTURISTIC
MECHANICAL
DESIGN
38 MS
ULTRA-LOW
LATENCY
EASY TOUCH
CONTROL
BATTERY DISPLAY
HIGH DEFINITION
AUDIO
BLUETOOTH
5.3

SPECIFICATIONS
V5.3
38 ms under game mode
10mm
20Hz-20Khz
98dB
Up to 7 hours per charge
(at 70% volume)
Up to 1O hours per charge
(at 50% volume)
up to 7 hours
100 days
10m
40 mAh
400 mAh
About 1.5 hours
Type-C
15 min = 100 min playtime
Bluetooth Version
Low latency
Driver size
Frequency Response
SNR
Music playtime
Talk time
Standby time
Transmission Range
Battery Earbuds
Charging case
Charging time
Charging interface
Fast Charging

PACKAGE CONTENTS
CHARGING CABLE
CHARGING CASE
USER MANUAL
User Manual
TRUE WIRELESS GAMING EARBUDS
CosmoBuds
X100
EARTIPS X 3 PAIRS
TOUCH BUTTON
LED INDICATOR

HOW TO CHARGE THE COSMOBUDS X100
CHARGING CASE
During use if the LED light on the TWS ashes with voice reminder "Battery Level Low",
it indicates that the TWS battery level is low.
To charge place the earbuds into the charging case.
The LED on the earbuds will turn on indicating that the earbuds are charging.
Once the earbuds are charged the LED on it will turn o.
To charge the case plug it to a 5V/1A charger using the included Type C Cable.
Once the indicator on the charging case Displays 100% charge you can disconnect the charger.
5V / 40 MA (EARBUDS)
5V / 400 MA (CHARGING CASE)

PAIRING THE X100 TO
YOUR BLUETOOTH DEVICE
INSTANT ON AND PAIR (IOP™)
The CosmoBuds X100 feature instant on and pairing feature. Once you have connected the
Earbuds to your device it will automatically connect to your mobile device as soon as you
remove it from the case.
NOTE:
Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect
the earbuds and follow the above-mentioned procedure.
X100 remembers previously connected devices; once switched on, the earbuds automatically
reconnect to the previously connected device.
A) FIRST TIME USER- SMART POWER ON
a. Once you remove the earbuds from the charging case, they will automatically enter
pairing mode.
b. Visit your mobile Bluetooth settings, New Device and connect to “CosmoBuds X100”
c. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.
B) MANUAL PAIRING- MANUAL POWER ON
a. Long press the touch buttons on both the earbuds simultaneously until the LED lights
on the earbuds start to ash.
b. The earbuds will connect to each other and enter pairing mode.
c. Visit your mobile Bluetooth settings, New Device and connect to “CosmoBuds X100”
d. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.

USING SINGLE EARBUD ONLY
SMART POWER OFF
MANUAL POWER OFF
HOW TO SWITCH MODES
Simply place the X100 into the charging case in correct orientation, they will switch o auto-
matically and enter charging mode.
Long pinch the touch button on either earbud for ve seconds to manually switch o the
X100.
Please note that both the earbuds can be used in mono mode.
Step 1: Use either of the two options; Smart Power On or Manual Power On for switching on
the desired earbud;
Step 2: The selected earbud will automatically enter the connection mode.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘CosmoBuds X100’ to
connect.
NOTE:
To switch to Stereo mode, simply take out the other earbud from the case. It will automatically
power on and pair with the previously selected earbud, enabling Stereo usage.
Triple Pinch Press the Touch Button on right earbud to switch between GOD Mode and Music
Mode. GOD Mode enables 38 ms low latency sound and enables accurate sound positioning.
Music Mode enables the integrated music engine for High Fidelity Audio and Bass.

TOUCH FUNCTIONS
GOD MODE/MUSIC MODE
MUSIC PLAYBACK MODE
PREVIOUS TRACK:
DOUBLE PINCH THE LEFT EARBUDS TOUCH BUTTON.
NEXT TRACK:
DOUBLE PINCH THE RIGHT EARBUDS TOUCH BUTTON.
PAUSE/RESUME PLAYING:
SINGLE PINCH THE TOUCH BUTTON ON EITHER EARBUD.
CALLING MODE
ANSWER INCOMING CALL:
SINGLE PINCH THE TOUCH BUTTON ON EITHER EARBUD.
REJECT INCOMING CALL:
LONG PINCH THE TOUCH BUTTON FOR 2 SECONDS.
HANG UP CALL:
SINGLE PINCH THE TOUCH BUTTON ON EITHER EARBUD.
Triple Pinch the Touch Button on right earbud to switch between Game Mode and Music Mode
GOD Mode enables 38 ms low latency sound and enables accurate sound positioning.
Music Mode enables the integrated music engine for High Fidelity Audio and Bass.

VOICE ASSISTANT
FACTORY RESETTING
THE COSMOBUDS X100
Triple Pinch the Touch Button on left earbud to activate your phone's default smart voice
assistant.
NOTE:
Volume cannot be controlled via earbuds and can only be adjusted via phone/media device
Perform the Factory Reset in case you face any diculty while operating your X100 Earbuds
Note: Before performing reset, clear "CosmoBuds X100" from paring device history by
forgetting the TWS
Step 1: Take out both the earbuds from the charging case.
Step 2: Double pinch the Touch Button on both earbuds to perform the reset. Blue LED will
turn on.
Step 3: After the reset, place the earbuds inside the charging case, close the lid and wait for
5 seconds.
Step 4: Congratulations! Your X100 has been reset and ready to pair again.

TROUBLESHOOTING
Potential Problem Solution
If one earbud is not working Perform the Factory Reset
If earbuds are unable to connect Perform the Factory Reset
If earbuds disconnect during
phone call
If there are other exceptions
in usage
Charge the earbuds or perform
the Factory Reset
Place the earbuds back into the
charging case and try using them
again or perform the Factory Reset
• Please follow the instructions to operate.
• Please charge the ear-buds with input power below 5V/1A in order.
to protect the battery.
• Please don’t use the ear-buds in extreme temperatures.
• Please don’t use the product near water.
• Please keep the product away from heat sources, as the heat may
damage it.
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume
in order to protect hearing and extend the ear-buds’ service life.
• Never disassemble or modify the device to avoid any permanent
damage or danger.
• Do not use the device during a thunderstorm to avoid irregular
function or risk of electric shock.
• Don’t use harsh chemicals to clean the device.
Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds
are switched on at rst. This can be done by using the volume control on the phone/ media device.
WARNING

HOW TO REMOVE VOLUME LIMIT
ON ANDROID AND iOS TO INCREASE
THE VOLUME
iOS
This will remove the iOS volume limit so that
earbuds can play at full volume.
1. Go to Settings > Music
2. Move the slider of Sound Check to the left to turn it o.

ANDROID
1. Go to Settings > Bluetooth
2. Click on CosmoBuds X100
3. In the options turn o option Sync Volume with phone
NOTE: ABOVE OPTION MAY NOT BE AVAILABLE IN ALL ANDROID PHONES. DEPENDING ON THE PHONE
MODEL AND MANUFACTURER.

REMOVE SPOTIFY & AMAZON MUSIC
VOLUME LIMIT.
Spotify and Amazon Music does not use system volume limit so
you have to go to app settings and turn o Audio Normalisation
to remove the limit.
SPOTIFY AMAZON
MUSIC

WARRANTY
The Cosmobuds X100 carries 1 Year warranty against manufacturing defects only.
Physical, Water damage and Tampered products are not covered under warranty.
Regular wear and tear from battery usage is not covered under warranty.
SUPPORT DETAILS
Phone: [phone] (Mon-Fri 10am to 5PM)
Email: [email protected]
FAQ: support.thecosmicbyte.com
FAQ’S
support.thecosmicbyte.com
Scan the QR code to know the Warranty Claim Procedure.
EARBUDS
IS 616: 2017/
IEC 60065: 2014
R-41242292
CHARGING CASE
IS 13252(PART 1):2010/
IEC 60950-1 : 2005
R-41236586
CERTIFICATIONS