Simply place the X100 into the charging case in correct orientation, they will
switch o automatically and enter charging mode.
Long pinch the touch button on either earbud for ve seconds to manually switch
o the X100.
Please note that both the earbuds can be used in mono mode.
Step 1: Use either of the two options; Smart Power On or Manual Power On for
switching on the desired earbud
Step 2: The selected earbud will automatically enter the connection mode.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘Cosmo
Buds X100’ to connect.
NOTE:
To switch to Stereo mode, simply take out the other earbud from the case. It will
automatically power on and pair with the previously selected earbud, enabling
Stereo usage.
A) FIRST TIME USER- SMART POWER ON
a. Once you remove the earbuds from the charging case, they will
automatically enter pairing mode.
b. Visit your mobile Bluetooth settings, New Device and connect to
“CosmoBuds X100”
c. The CosmoBuds X100 will automatically pair with your mobile and is ready
for use.
B) MANUAL PAIRING- MANUAL POWER ON
a. Long pinch the touch buttons on both the earbuds simultaneously until the
LED lights on the earbuds start to ash.
b. The earbuds will connect to each other and enter pairing mode.
c. Visit your mobile Bluetooth settings, New Device and connect to
“CosmoBuds X100”
d. The CosmoBuds X100 will automatically pair with your mobile and is ready
for use.
USING SINGLE EARBUD ONLY
SMART POWER OFF
MANUAL POWER OFF
