Costway BB5670 User manual

FLOOR AREA
2MX1.5M
THIS INSTRUCTIONBOOKLET CONTAINS IMPORTANTSAFETYINFORMATION. PLEASE READ AND KEEPFORFUTURE REFERENCE.
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Baby Changing Table
BB5670
ASSEMBLED BY 1 ADULT

Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
A. Left Side Panel
(1 pc)
B. Right Side Panel
(1 pc)
M. Back Panel
(3 pcs)
N. Back Middle Rail
(2 pcs)
F. Back Bottom Rail
J. Front Cross Beam
(1 pc)
K. Drawer Rail
(3 pcs)
L. Drawer Front Panel
(3 pcs)
(1pc)
G. Top Panel
(1 pc)
H. Panel Support Bar
(2 pcs)
I. Top Round Rail
(1 pc)
C. Back Cross Beam
(1 pc)
V. Drawer Support
(3 pcs)
D. Drawer Left Panel
(3 pcs)
E. Drawer Right Panel
(3 pcs)
O. Drawer Back Panel
(3 pcs)
P. Drawer Bottom Panel
(3 pcs)
Changer Assembly Parts
02 03

Item # Fittings
QtyNo
1
2
3
4
5
6
7
8
9
10
18pcs
Bolt 1/4"*2-1/4"
18pcs
Barrel 1/4"*13 mm
Dowel 8*30 mm
Screw F4*25 mm
Bolt 5/32" *28mm
Allen key 3/16"*1"
Knob
Safety Strap
Wood Screw F4*15mm
Flat Washer Ø16mm
1pc
6pcs
1pc
2pcs
2pcs
27pcs
14pcs
6pcs
900 x 25mm
Phillips screwdriver (Not included)
Changer Assembly Hardware
A
C
Left side panel (1 pc)
Top Panel
Top Round Rail
Drawer Rail
Right Side Panel
(1 pc)
N
G
I
K
B
(2 pcs)
(1 pc)
(1 pc)
(3 pcs)
(1 pc)
M(3 pcs)
Back Middle Rail Back Bottom Rail
Panel Support Bar
Front Cross Beam
F
H
J
(1 pc)
(2 pcs)
(1 pc)
Back Cross Beam Back Panel
Changing Table Unit
A
B
C
M
M
M
N
N
F
G
H
H
I
J
K
K
K
04 05

Changer Drawer
L
D
E
O
P
V
7
7
L
D
Drawer Front Panels (3 pcs)
Drawer Left Panels
Drawer Right Panels
Drawer Back Panels
(3 pcs)
E
O
(3 pcs)
(3 pcs)
Drawer Bottom Panels
P
Drawer SupportV (3 pcs)
(3 pcs)
Knob
7(6 pcs)
Step 1: Attach Drawer Left Side Panel (D) and Drawer Right Side
Panel (E) to Drawer Back Panel (O) with 12 screws (#5)
Step 2: Slide Drawer Bottom Panel (P) into the grooves of the side
panels.
5 Screw 12 pcs
D
E
O
5
5
5
5
5
P
E
O
D
06 07

Step 3: Attach Drawer Support (V) to Drawer Back Panel (O)
Step 4: Attach Drawer Front Panel (L) to assembled unit part (D)
and part (E) and part (V) with 15 screws (#5).
5 Screw 15 pcs
E
V
P
L
E
5
5
5
5
5
5
5
V
E
P
Step 5: Attach Knob (#7) to Drawer Front (L) with Bolt (#6).
Step 6: Attach 2 Panel Support Bars (H) to Back Cross Beam (C)
and Front Cross Beam (J) with 4 Wood dowel (#4).
6
6
6
7
7
7
6Bolt 6 pcs
7Knob 6 pcs
L
E
D
P
O
C
J
H
H
08 09

Step 7: Attach Back Cross Beam (C), Back Middle Rail (N), Back Bottom Rail (F), Top Round
Rail (I), Front Cross Beam (J) and Drawer Rail (K) to Right Side Panel (B) using 9 Bolts (#2) and
9 Barrel Nuts (#3) and 7 Wood Dowels (#4). Tighten firmly with Allen key (#1).
2Bolt 9 pcs
3Barrel 9 pcs
4Dowel 7 pcs
1Allen key 1 pc
B
C
N
N
F
K
K
KJ
I
1
1
1
1
1
1
1
1
1
1
2
3
3
3
33
3
3
3
3
3
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
Step 8: Slide Top Panel (G), Back Panel (M) into the grooves.
G
M
M
M
I
F
N
N
K
K
K
J
B
10 11

Step 9: Attach Back Cross Beam (C), Back Middle Rail (N), Back Bottom Rail (F), Top Round
Rail (I), Front Cross Beam (J) and Drawer Rail (K) to Left Side Panel (A) using 9 Bolts (#2) and
9 Barrel Nuts (#3) and 7 Wood Dowels (#4). Tighten firmly with Allen key (#1).
2Bolt 9 pcs
3Barrel 9 pcs
4Dowel 7 pcs
1Allen key 1 pc
A
M
M
M
F
I
43
3
3
3
3
3
3
3
3
3
22
2
2
2
2
2
2
2
2
1
1
1
1
1
1
4
4
4
4
4
4
4
N
K
K
K
J
B
Step 10: Insert the three assembled drawers into unit.
Step 11: Attach the Safety Strap (#8) to Back Cross Beam (C) and
Front Cross Beam (J) by using the Wood Screws (#9) and Flat
Washer (#10).
Adjust the restraint strap to fit baby’s body. To fasten restraint strap, insert the buckle as shown
below.To release press inward on the tabs.
Changing Table Complete
How to use safety strap:
88
9
10
8Safety Strap 1 pc
9Wood Screw
2 pcs
10 Flat Washer
2 pcs
12 13

Care and Maintenance
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warp-
ing, shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture
as it ages.
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to
the finish.
Liquid spills should be removed immediately. Using a soft clean
cloth, blot the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
Welcome to visit our website and purchase our quality products!
this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
Reward Points
Exclusive Customer Service
Permanent Shopping Cart
Order History
14 15