Costway HY10021 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item. US:[e-mail]
UK:[e-mail]
AU:[email protected]
Toddler Bed
HY10021/HY10025
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US office: Fontana UK office: Ipswich AU office: Truganina

Before You Start
Warning for Assembly
Assembled only by adults
Remove all Packaging, separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Ensure a secure surface during installation, and place the product always on a flat,
steady and stable surface.
General Security Warning
Caution: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies
and children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
0-3
Please read all instructions carefully and keep it for future reference.
02 03
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
Due to the presence of small parts during assembly, keep
out of reach of children until the assembly is completed.
CAUTION
DO NOT use this bed without a mattress.
Infants who cannot get in and out of a bed without help can be
trapped between a mattress and a wall, causing suffocation.
NEVER place infants in the bed without guardrails in place.
NEVER use bed with children under 3 years.
Never place bed near windows where cords from blinds or drapes
may strangle a child.
Do not place items with a string, cord, or ribbon around a child’s
neck, such as hood strings or pacifier cords. Do not suspend strings
over a child’s bed for any reason.

PARTS
04 05
Headboard x 1 Footboard x 1 x 2
x 4 Mattress support x 1 Frame side board x 4
ABC
DEF
x 7 Hex wrench x 1 5/16*18mm Screw x 20
H I J
x 24 Ø4*38mm Screw x 4 x 4
KL M
1/4*38mm Screw x 9 5/16*40mm Screw x 4 x 2
N P Q(D)x4
ASSEMBLY INSTRUCTION
Step 1: Attach the legs (D) to the headboard (A) and footboard (B), fasten
them completely.
D

06 07
(C)x1 (M)x2 (K)x 8
(P)x2
x2
(J)x6
M
J
K
KP
JK
Q
(Q)x 1
C
ASSEMBLY INSTRUCTION
Step 2: Align the frame side (F) with the wooden center leg (C), fasten
with washers (K) and screws (P).
Align brackets (M) to the end of frame side boards (F) , fasten with wash-
ers (K) and screws (J).
(K)x8 (J)x8
Step 3: Align the assembled side frame to the Headboard (A), and attach
with washers (K) and screws (J).
Do not tighten screws completely.
Step 4: Align the assembled side frames to the Footboard (B), and attach
with washers (K) and screws( J ).
Tighten all screws for steps 3 and 4.
ASSEMBLY INSTRUCTION
K
J

08 09
ASSEMBLY INSTRUCTION
Step 5: Fasten wooden supports (H) to the Mattress Support with screws
(N) by Household screwdriver.
(H)x7 (N)x7 (N)x2(L)x4
ASSEMBLY INSTRUCTION
Step 6: Assemble the Mattress Support.
Place the assembled mattress support (E) on the bed frame. Ensure the
middle slat and end slats next to the headboard and footboard are
tightened with screws (L).
N
H
N
LL