Costway EP24899US User manual

USER'S MANUAL
Ice Cream Maker
SHOP EASY. SAVE MONEY.
EP24899US

IMPORTANT NOTICES
When using an electrical appliance, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and/or
injury, including the following:
1. Read all instructions before using.
2. Remove all packing material and carefully check your ice cream
3.
4. Pure water is not allowed to be used on this unit, spring water is
recommended.
5. Ensure the voltage is compliant with the voltage range stated on
the rating label, and ensure the earthing of the socket is in good
condition.
6. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
orderto avoid a hazard.
7. Do not overturn this product or incline it over a 45 angle.
8. To protect against risk of electric shock, do not pour water on
cord, plug and ventilation, immerse the appliance in water or any
other liquid.
9. Unplug the appliance after using or before cleaning.
10.Keep the appliance 8cm (3”) from other objects to ensure the
good heat releasing.
11.Do not use the accessories which are not recommended by
Manufacturer.
12.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
1
maker to ensure it is in good condition and that there is no damage
to the ice maker or power cord and plug.
Before using the ice cream maker for the first time, please wait 2
hours after positioning it, and keep the transparent lid open for at
least 2 hours.

supervised to ensure that they do not play with the appliance.
13.Do not use the appliance close by flames, hot plates or stoves.
14.Do not switch on the power button frequently (ensure 5min.
interval at least) to avoid the damage of compressor.
15.Metal sheet or other electric objects are not allowed to be
inserted into the appliance to avoid fire and short circuit.
16.Do not use outdoors.
17.Never clean with scouring powders or hard implements.
18.Please keep the instruction manual.
19.Warning: Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
20.This appliance is intended to be used in household and similar
applications such as
–staff kitchen areas in shops, offices and other working
environments;
–farm houses and by clients in hotels, motels and other
residential type environments;
–bed and breakfast type environments;
–catering and similar non-retail applications
21.When positioning the appliance, ensure the supply cord is not
trapped or damaged.
22.Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance
23.Children aged from 3 to 8 years are allowed to load and unload
refrigerating appliances.
Warning; Risk of fire / flammable materials.
WARNING: When positioning the appliance, ensure the supply cord
is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance.
Children aged from 3 to 8 years are allowed to load and unload
refrigerating appliances. To avoid contamination of food, please
2

respect the following instructions:
– Opening the door for long periods can cause a significant increase
of the temperature in the compartments of the appliance.
–Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
–Clean water tanks if they have not been used for 48 h; flush the
water system connected to a water supply if water has not been
drawn for 5 days.
– If the refrigerating appliance is left empty for long periods, switch
off, defrost, clean, dry, and leave the door open to prevent mould
developing within the appliance.)
Regarding the information pertaining to the use of the appliance,
please refer to the below paragraph of the manual.
3

SPECIFICATIONS
Model：
Capacity：1L
Voltage：120V/60Hz
Anti-shock protection class：I
Climate type：N/SN
N.W：16 LBS
G.W：20.2 LBS
PRODUCT FEATURE
1. Knob control, simple and reliable operation, will not bring you a lot
of trouble;
2.
3.
4.
5 .
4
EP24899US
Plastic shell, elegant, stylish, and light;
High mixing and low noise;
Various methods of making quick-frozen ice cream;
Detachable parts, easy to clean, hygienic and safe.

1. Please read the instruction manual carefully before use.
2. Check if the voltage range used is the same as that marked on the
nameplate, whether the power cord plug and the socket match, and
ensure that the socket is well grounded.
3. When the power cord or socket is damaged, or any other electrical
components are faulty, do not continue to use this product. It should
be immediately sent to the dealer or local special maintenance
network for replacement or repair.
5. The power cord plug and air outlet should not be drenched. Do not
immerse the machine in water or other liquid to prevent electric
shock.
6. When not in use or cleaning, the power plug must be unplugged.
7. When using, the inlet and outlet should be kept at a certain
distance (about ) from other items, so as not to affect the heat
dissipation effect of the machine.
8. Any accessories not recommended by the manufacturer may not
be used.
9. Do not allow children or the disabled to operate without any
guidance or supervision.
10. This product should not be placed next to a high-temperature
5
3”

gas or electric stove to avoid accidents.
11. Do not start the compressor power switch frequently (at least 5
minutes each time) to avoid damage to the compressor.
12. Metal foil or other conductive materials are not allowed to be
inserted into the machine to prevent fire or short circuit.
13. When taking out the ice cream, do not knock the surface or edge
of the container to avoid damage to the container.
14. Do not start the power switch when the ice cream container
barrel is not installed in place or the mixing fan blade is not placed
properly.
15. The initial temperature of making ice cream mixture is 25± 5℃.
The prepared ice cream material cannot be put into the refrigerator
for freezing and then put into the machine for making. In this way, the
ice cream will solidify ahead of time and the motor will be locked.
The motor will be cut off because it enters the protection circuit
ahead of time, which will cause the machine to misreport the
completion of ice cream production.
16. After starting the machine freezing, do not remove the motor and
transparent cover during the working process.
17. This product cannot be used outdoors.
18. Do not use chemical cleaners and hard tools to clean the product.
, and do not useDo not use dishwasher to clean the loading bowl
6

water to directly wash the evaporator.
19.
20. When the ice cream machine is started without adding ice cream,
there will be a slight sound of mixing blade scraping to the loading
bowl, which is a normal phenomenon.
21. There are two round copper sheets at the motor assembly of the
transparent cover installed on the upper cover. When using, please
wipe the water stains on the transparent cover and the copper plates.
The two copper plates will be connected by water, which will lead
to power failure of the motor. Pull out the power line, wipe the water
stains, and restart it.
22. Save the instruction manual.
7
After operation, please unplug the power plug in time.

.PRODUCTINSTRUCTION…… ………………… .... .. ......
1) Structure
2) Control panel
Transparent lid
Mixing blade
Loading bowl
Top lid
Housing
Motor
Power Off
Single Mixing mode
Single refrigeration
mode
Ice cream mode
Ba
Spoon
8
se

HOW TO MAKE ICE CREAM
NOTE: Please thoroughly clean all parts that will contact with ice
cream before use, including: cooling bowl, loading bowl, mixing fan
blade, transparent lid, etc.
Before cleaning, you must ensure that the power cord plug is
disconnected from the outlet. When making ice cream, keep the
machine on a level surface to ensure that the compressor of the
machine is working properly.
Here are the steps to make an ice cream:
Step 1.
Pour the well prepared recipe ingredients and warm water into the
removable bowl, then have a uniform mixing.
9

Step 2.
Then put the loading bowl into the ice cream machine, both ends of
the loading bowl handle shall be aligned with the groove of the upper
cover.
Step 3.
Install the transparent lid and motor assembly.
Installation
position of loading
bowl handle
10

Step 4.
Install the mixing fan blade, transparent lid and motor assembly
Step 5.
Put the components installed in step 4 into the ice cream machine,
make sure that the center of the convex hull of the loading bowl and
the motor components of the mixing fan blade are in the same
straight line, lock the components clockwise, and make sure that the
triangle mark on the components rotates to the "LOCK" mark
Lock
11

Step 6.
Plug in the power and turn the knob to select the ice cream mode
Step 7.
When the ice cream is finished, turn the knob back to the “OFF”
position
12

Step 8.
Turn the transparent lid and motor assembly anticlockwise. When
the triangle mark is aligned with the unlocking mark, take out the
assembly and then take out the loading bowl
OPERATION
1. Connect the power supply and plug the power cord into a suitable
socket. The shape and voltage of the socket shall be the same as
those indicated.
2. KNOB CONTROL FUNCTIONS
1). Function description of buttons
①Single mixing mode:
Turn the knob to the single mixing mode, and the mixing motor
starts to realize the mixing function. The default time is 30min.
When the time or hardness reaches the set value, there will be 10
beeps to remind that the mixing is completed. After completion,
please turn the knob to other positions before other operations.
13

②Single refrigeration mode
The compressor and cooling fan are started to realize the
refrigeration function. The default time is 30min. After completion,
there will be 10 beeps to remind that the refrigeration is
completed. After completion, please turn the knob to other
positions to carry out other operations.
③Ice cream mode
The compressor, mixing motor and cooling fan are started to
make ice cream. When the ice cream is finished, there will be 10
short beeps. At this time, you can enjoy the ice cream. If there is
no operation, it will enter the insulation function automatically, and
10 short beeps will appear after the insulation is completed.
3. KEEP COOL FUNCTION
Ice cream keep cool function: In order to prevent you from leaving
during the ice-cream making process, and the ice-cream can not
be eaten or stored in time after the completion of the production,
which causes the ice-cream to melt, we have added the following
humanized design: when the ice-cream making is completed but
no one operates, the machine will automatically start every 10
minutes and cool for 10 minutes, so as to maintain the fresh taste
and texture of ice cream. The cooling time is 1 hour. There are 10
short beeps when it is finished, and then the machine will be shut
down automatically. Please turn the knob back to the “Power OFF”
position.
4. MOTOR SELF-PROTECTION FUNCTION
When the ice cream becomes harder, the mixing motor might
be blocked. Then the motor protection device makes the mixing
motor stop working by detecting its temperature to ensure the
life of the motor.
14

5. COMPRESSOR SELF-PROTECTION FUNCTION
After switching from ice cream mode or single refrigeration mode
to shutdown mode, if it is switched back to ice cream mode or
single refrigeration mode again, the compressor has a protection
time of about 3 minutes. However, after unplugging the power line,
start the machine again. The default is to restart. At this time, there
is no delay when selecting ice cream mode or single refrigeration
mode again.
6. CONTROLLING THE VOLUME OF THE INGREDIENTS
To avoid overflow and waste, please make sure that the ingredients
do not exceed 60% of capacity of the removable bowl (Ice cream
expands when being formed).
ELECTRICAL DIAGRAM
15
Compressor
P
Starter
rotector
DC 12V Fan
DC 12V motor
Control
panel
M
YELLOW/GREEN
Fan
control
circuit
Microcomputer controller
Compressor control circuit
Motor control circuit
L
M
power supply circuits
Buzzer circuit
Reset circuit
Oscillating circuit
Power
Plug
N
E
L
Fuse

MAINTENANCE
Caution: The plug must be removed before cleaning to avoid electric
shock.
（1）Take out the mixing blade, wipe it with a dampened cloth
（2）Take out the removable bowl, clean it with a dampened soft
cloth
（3）Wipe the transparent lid and refill lid with a dampened cloth
（4）Remove the on the body or other places with a dampened
cloth, and do not pour water on cord, plug and ventilation,
immerse the appliance in water or any other liquid
（5）Allow drying thoroughly with a dry cloth, then return the
component to the home position.
COMMON PROBLEM & SOLUTIONS
No. Exist problem Reason analysis Resolutions
1
Not easy to take out
loading bowl after the
ice cream is finished
There are water drops
between the refrigeration
barrel and the loading
bowl that are not wiped
clean, resulting in
freezing
Wait 3-8 minutes
before taking out
the ice cream
bucket
The transparent lid is
lifted to the mixing fan
blade, and it cannot be
stuck in place
Put the mixing fan blades
in place, and pay atten-
tion to the alignment of
the convex hull at the
bottom
Put the mixing fan
in place and rotate
the transparent
cover in place
2
The loading bowl cannot
be placed in the cold
bucket
Deformation caused by
improper use of loading
bowl
Buy a new loading
bowl
3
At the beginning of making
ice cream, the mixing fan
seriously scratched or
jammed.
Deformation caused by
improper use of loading
bowl
Buy a new loading
bowl
4
16
dirt

17
Correct Disposal of this product
This marking indicates that this product should not
be disposed with other household wastes
throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To
return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.