Costway HONEY JOY JV10035 User manual

Kids Ergonomic Study Table
JV10035

Please read all instructions carefully and keep it for future reference.
General Security Warning
Caution: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies and
children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping.
Warning for Assembly
Construction only by adults
Remove all Packaging, separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat,
steady and stable surface.
WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 years.
2

3
BOX CONTENTS
JV10035-12/JV10035-22
Bookshelf Parts and Installation
x 1
x 1
x 1 x 1 x 1x 1
x 1x 1x 1 x 2
x 14x 14 x 2
x 7
A
a b c d
B
C ED F
G IH J
ST3×16mm
M6×30mm
Remark: Screws in bookshelf
drawer box.

4
1 2
3 4
Insert the bolt “a” into part “A”. Assemble the part “D” to the part
“A” and fasten them using the
part bolt cam “b” .
Assemble the part “C” to the part
“A+D” and fasten them using “a”
and “b”.
Assemble the part “A+D+C” to the
part “B” and fasten them using “a”
and “b”.
a
aa
b
b
b
b
a
a
b
b
a
A A
A+D
A+D+C
B
C
D

Assemble the part “E” to the
combined part and fasten them
using “a” and “b”.
Insert the part “G” to part “H” and
hard push into the position.
Assemble the part “I” and “J” to
the part “F” using the screw “c”.
Assemble the part “F+I” to the
combined part and fasten them
using “b”.
5
5 6
7 8
4xa
b
b
c
c
ccc2xb
c
c
E
F
F+I
I
J
I
H
G

6
9 10
11
12
Assemble the part “C” to the
combined part and fasten them
using the part “a” and “b”.
Fix the combined part using the
screw “d”.
Insert the drawer “H” into the slide rails.
Whole bookshelf finished.
bdd
b
b
b4xa
H
C

7
BOX CONTENTS
x 1
x 1
x 1 x 1 x 1
x 2
x 1 x 2x 1
x 1x 1x 2 x 2
x 1
x 1
x 17x 15 x 1 x 1x 4
N
K
e f g h i j
M
L
O P Q R S T
U V W X Y
M6×12mm M6×14mm S5ST6x35mm
x 5
M6×30mm
JV10035-12/JV10035-22
Study Table Parts and Installation

8
1 2
3 4
Assemble the part “O” into part
“P” and “Q” and screw into place.
Fix the combined part “O+P+Q” to
the part “K” using the tool “i” and
screws “e” and “f”.
Assemble the part “R” to part “S”
then lock into place.
Assemble the combined part “R+S”
to the part “K” using the tool “i” and
screws “e” & “f” and spring washer
“j”.
O
K
i
i
e
j
f
f
P
R
S
Q
Remark: Fasten screws “f” first,then screws “e”.
K
O+P+Q
3xf
i
i
2xe

9
U
U
K
i
ff
f
4xf
4xf
f
5
6
U U
×√
Assemble the part “T” to the part “K” using tool “i” and screws “e”.
K
i
T
T
e
e
e
e
Remark: Pls pay more attention about the direction of the part “U”.
Assemble the part “U” to the part “K” using the tool “i” and screws “f”.

M
i
h
h
h
K
L
L
10
i
4xe
h
Remark: Make sure the “L” part is oriented correctly-the scale must be facing outwards.
7
8
First remove the part “X” then Assemble the part “L” to the part “K” using the
tool “i” and screws “e”.
Assemble the part “M” to the part “L” using the tool “i” and screws “h”.

11
X
W
NY
V
gg
g
gg
i
9 10
11 12
Fix the part “X” into place with
the part “W” and “V”.
Assemble the table together with
bookshelf using tool “i” and
screws “g”.
Slide the drawer “N” into place. Using the part “Y” to adjust the
height of the study table.

12
BOX CONTENTS
x 3
k l m
x 3
ST4×18mm
x 3
D4
m
m
k
l
JV10035-12/JV10035-22
Edge protect parts and installation
Remark: It is up to the consumer whether this step is need to be installed or not.
Assemble the corner protector “m” to the right angle
using part “l” and “k ”.

13
WALL
Hole size on the wall
=φ10×60mm
x 1
q
o
pq
q
n
n o p
x 1 x 1
M6×30mm
x 1
ST6×50mm
BOX CONTENTS
JV10035-12/JV10035-22
Wall connector parts and installation
Remark: Need to drill a whole on the wall.It is up to the consumer whether this step is need
to be installed or not.
Drill a hole on the wall and attached the part “q”
both to bookshelf and wall,using part “n” and “o”
and “p”.

14
When the child's arm is naturally
drooping, it can be placed on the
table.It says that the height of the
table is just suitable.
USE INSTRUCTION
Use of the different angle
Product Function
Height
Adjustable
0-60° Angle W=39.3inch
Drawer
Pen Box Rounded Edges L Board Bookshelf
Drawer
How to adjust the height
Insert the hand crank into the round hole on the right side of the desk,
Turn the hand crank clockwise to lower the desktop, and counter-
clockwise to raise the desktop. Choose an appropriate scale on the
legs of the table according to the height of the child.
How to Clean the table face
If there are traces of watercolor pens or ball pens on the desktop, you
can clean them up with a damp rag. If there are more stubborn stains
on the table, you can use toothpaste or essential balm to deal with
then use damp rag to clean up.
How to adjust the table angle
Hold the groove of the tabletop with one hand, you can lift or press to
adjust the angle (0-60) of the tabletop.
Calligraphy
0°
Writing
7-15°
Reading
30-45°
Painting
55-60°

Welcome to visit our website and purchase our quality products!
this product and giving us valuable feedbacks.
With yourinspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOODPRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
Reward Points
Exclusive Customer Service
Permanent Shopping Cart
Order History
15