Costway HW64401 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
3 Pcs Wicker Set
HW64401
FLOOR AREA
2MX2M
ASSEMBLED BY 2 ADULTS

www.costway.com
Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
02

www.costway.com
Not actual size
Left Arm x 2 Right Arm x 2
Back x 2
Back Panel x 2
Footrest x 2
Bottom Foot x 8
Seat x 2
03
Seat Cushion x 2
Back Cushion x 2

www.costway.com
Not actual size
04

www.costway.com
Hardware List
Actual size
L4
M6 x 15mm
BOLT
BOLT
M32
M6 x 30mm
BOLT
M6 x 35mm
N12 O48
M6
WASHER
P1
4 x 4
ALLEN WRENCH
05

www.costway.com
STEP 1
Aach the boom foot (G) to boom of each
Arm(B) by inserng bolts (M) with washers (O)
through the pre-drilled holes on the arm into the
pre-welded nuts on the boom foot.
Repeat step for the other side arm(A).
06
IMPORTANT:Do not ghten completely unl
assembly is completed.

www.costway.com
STEP 2
(N) with washers (O) through the pre-drilled holes
Aach the seat(D) to the arm (B) by inserng bolts
on the seat into the pre-welded nuts on the arm.
Repeat step for the other side arm(A).
07

www.costway.com
Aach the footrest(E) to the arm (A&B) by inserng
bolts (M) with washers (O).
STEP 3
Aach the back panel(F) to the arm (A&B) by
inserng bolts (M) with washers (O).
STEP 4
08

Aach the back (C) to the seat(D) by inserng
bolts (N) with washers (O).
Aach the back (C) to the arm (A&B) by
inserng bolts (L) with washers (O).
STEP 6
www.costway.com
STEP 5
09

www.costway.com
Tighten all the bolts with the allen wrench,
and turn the chair to the upright posion.
place the seat cushions(R) ,back cushion (Q) on the chair.
Your chair is now ready for use.
STEP 7
10