Costway HW65218 User manual

3-Piece Kitchen Dining Set
HW65218
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
FLOOR AREA
2MX2M
ASSEMBLED BY 2 ADULTS

Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
Important note :
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching
the parts.
- Kindly follow the assembly instructions step by step.
- Do not tighten all screws and bolts until the table is fully assembled.
PARTS LIST
HARDWARE LIST
TABLE TOP
1 PC
AB
1
2 PCS
C
2
1 PC
RIGHT TABLE LEGS
2 PCS
DE
2 PCS
F
2 PCS
1
BIG BOLT
8 PCS
SCREW
4 PCS
4 5
2
SPRING WASHER
8 PCS
3
ALLEN KEY
1 PC
6
8 PCS
SMALL BOLT
6 PCS
5/16 *63 mm Ø4 *40 mm 5/16 *13 mm
5/16 *19 mm M4 1/4 *60 mm
02 03

Phillips Head Screw Driver
Is Required But Not Included
Adjustable Shelf
Remove
STEP 1
5
6
B
C
B
A
Remove
Remove
Remove
STEP 2
F
E
5
1
4
3
2
D
D
FE
Remark: May require two people to turn assembled unit upright
Note: Fully tighten all bolts
STEP 3
04 05

Important note :
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching
the parts.
- Kindly follow the assembly instructions step by step.
- Do not tighten all screws and bolts until the stool is fully assembled.
PARTS LIST
HARDWARE LIST
G
I
H
K
J
5
1
4
3
K
I
J
H
CHAIR SEAT
1 PC X 2
GH
2 PCS X 2
I
2 PCS X 2
LONG CHAIR STRETCHER
2 PCS X 2
JK
2 PCS X 2
1
BOLT
4 PCS X 2
SCREW
8 PCS X 2
4 PCS X 2
ALLEN KEY
1 PC X 2
4 5
2
SPRING WASHER
4 PCS X 2
3
5/16 *63 mm Ø4 *40 mm 5/16 *13 mm
5/16 *19 mm M4
STEP 4
STEP 5
2
06 07

Note: 1. Fully tighten all bolts
2. The stool can be hung on the shelf under the table to save storage space
STEP 6 STEP 7
08 09