Costway JV10443 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item. US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina
Ladder Shelf
JV10443
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Before You Start
Read each step carefully before starting. It is very important
to ensure each step followed in correct order, otherwise
assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw
edges. Have a check to make sure all parts are included.
Work in a spacious area, preferably on a carpet close to
where the unit will be used.
Keep the handtools close at hand. Do not use power tools to
assemble your furniture. They may scratch or damage the
parts.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the
finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot
the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
It is best to keep your furniture in a climate-controlled environment.
Extreme temperature and humidity changes can cause fading, warping,
shrinking and splitting of wood.
It is advised to keep furniture away from direct sunlight as sun may
damage the finish.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture as it
ages.
Further advice about wood
furniture care

19

x10A x1Cx4B
x20D x8E x12F
x14G x2H x2I
x4J x4K x6L
x2M x10N x6O
M7x50mm M7x70mm
M8x39mm
7x48mm
M6.5x10.5mm
L4
Ø 8x30mm Ø 10x50mm Ø 6x35mm
Ø 15mm (Big) Ø 12mm (Small)
Ø 10mm (Small)
M3.5x25mm
M3.5x13mm
Ø 15mm (Big)
18
I
SO 03
Tx 2
M3.5x25mm
Ix 2

x2P x2Q x4R
x6S x2T x1RM35A
M6.4x25mm 65x38x15x1.5mm M3.5x15.5mm
Ø 6x30mm SO 03 350 mm
SET-UP TIME: 90 MINUTES
NUMBER OF PERSONS: 02
TOOLS: (Not
Provided)
MEASURE
Ø 15mm (Big)
Ox 6
Ø 10mm (Small)
Nx 10
16
17

Ø 6x35mm
Fx 2 Ø 6x30mm Sx 6
115
7x48mm
Mx 2
Ø 15mm (Big)
Gx 4

Ø 12mm (Small)
Hx 2
M8x39mm
Jx 4
2
M7x50mm
Ax 3
L4
Cx 1 M6.4x25mm Px 1
14

M3.5x13mm
Lx 6
RM35A
350 mm
RM35A x 1
3
4
Ø 15mm (Big)
Gx 6
12
13
M7x50mm
Ax 3 L4 Cx 1 M6.4x25mm Px 1
G

M7x50mm
Ax 4 L4 Cx 1
5
Ø 10x50mm
Ex 4
Ø 8x30mm
Dx 4
65x38x15x1.5mm
Qx 2 x 4
M3.5x15.5mm
R
The front is shaded
Ø 15mm (Big)
Gx 2
11