Costway OP70571 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Inflatable Projection Screen
OP70571

www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: cs.us@costway.com
UK: cs.uk@costway.com
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02

www.costway.com
Do not use extension cords with this product. Outdoor use only.
Read all instructions before assembling this inflatable device. Keep instructions for future use.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
CAUTION:ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 14 years of age. As with all electric products,
precautions should be observed during handling and use to prevent electric shock.
WARNING:
ELECTROCUTION RISK:
-
KEEP ALL ELECTRICAL LINES, RADIOS, SPEAKERS AND OTHER ELECTRICAL DEVICES AWAY
FROM THE CONSTANT AIR INFLATABLE.
-
DO NOT PLACE THE CONSTANT AIR INFLATABLE NEAR OR UNDER OVERHEAD ELECTRICAL LINES.
MODEL NO.:BR-6 0.8A
RATED VOLTAGE RANGE:
DANGER
CAUTION: ELECTRICALLY
OPERATED PRODUCT
DANGER - TO PREVENT ELECTRIC SHOCK, DO NOT
IMMERSE IN WATER. WIPE CLEAN WITH DAMP CLOTH.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH. ADULT
SETUP AND SUPERVISION REQUIRED.
CAUTION: The blower is a high volume blower, and is capable of moving lots of air very quickly. Place the blower in
an area where it will not suck in dirt or leaves. Keep away from water and traffic. Keep children away from the blower.
Only the blower supplied should be used for inflation
INSTRUCTIONS FOR BLOWER INSTALLATION
NOTE: Set up as close to power source as possible. The product
should be periodically examined for potentially unsafe conditions
such as: damaged cord, plug, housing or parts, and that in the
event such damage is found, the product should not be used until
properly repaired. Never leave the blower outside in the rain or
exposed to the elements when not in use. When in use, do not
place the cord across traffic areas, water or damp areas. The
blower should be placed on a stable surface and anchored per
product instructions.
1) Make sure that the blower switch is in the “OFF” position.
Plug the blower into a 120V outlet.
2) Set the power switch of the blower to “ON” to inflate. After
use, turn the power to “OFF”.
3) To disconnect, have an adult grip it tightly and pull the plug
from wall outlet.
WARNING: Failure to follow these instructions
could result in serious injury or death.
• ADULT SET-UP AND SUPERVISION REQUIRED.
• This blower is for residential use only. It is not
intended to be used in commercial or industrial
settings.
• Never insert fingers, pencils or any other object
through the grill at ANY time.
• Do not operate blower with a damaged cord or
plug, after the appliance malfunctions or has been
dropped or damaged in any manner.
• Do not operate in the presence of explosive
and/or flammable fumes.
• Never connect the blower to any solid - state
speed control device.
• To reduce the risk of fire or electric shock, do not
use this blower with any solid-state speed control
device.
INSTRUCTIONS FOR BLOWER CLEANING AND STORAGE
Do not immerse the blower in water. Unplug the blower before cleaning. To clean: wipe with a damp cloth. The blower does
not require any lubrication and has no user serviceable parts. Do not attempt to service the blower. When not in use, store the
blower indoors in a dry place. Store the blower upright on a stable surface. Loosely coil the cord and place it beside the blower.
This blower is not a toy. Use under the direct supervision of a competent adult.
Keep away from children.
READ AND SAVE THESE INSTRUCTIONS.
SAFETY WARNINGS:ELECTRICAL BLOWER
03

www.costway.com
B. 1 Blower
D. 2 Blower Stakes
A. 1 Inflatable Projection Screen
(Inflatable body & screen)
C. 1 Carrying Bag
E. 8 Inflatable Projection Stakes F. 4 Repair Patches
PART LIST
G. 4 Ropes
Do not use in
windy conditions.
Do not leave
out in rain.
Do not allow children
to touch fan or
electrical cord.
Must be anchored
using stakes.
Only for domestic use. For outdoor use only.
Adult supervision required. Adult assembly required. Keep away from fire.
Instruction manual included. Read the instructions.
DO NOT:
- Attach or leave any items on / inside the product.
- Jump off / onto the product.
- Use in public areas or as a rental.
- Use in windy conditions.
- Leave out in the rain.
Instructions:
- Place the product on a level ground at least 2m (6.6') away from any other objects
(fences, buildings, trees, electrical wires, walls, bodies or sources of water, etc…)
- Ensure the product is properly anchored using the stakes provided. Strong
wind may lift the product off the ground.
- Keep the fan and its power cord away from children, water and traffic.
- The Air Blower MUST remain turned ON during use. Air loss through the seams is
normal.
- Thoroughly dry before use.
No sharp objects.
WARNINGS
04

www.costway.com
CAUTION CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard Do not touch
• Do not open or try to service the blower. If blower needs servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping and/or damage by yard equipment
such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used and do not insert small objects into
any part of the blower.
• WARNING - Electrical Hazard - DO NOT USE EXTENSION CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving the slide.
• WARNING - To reduce the risk of fire or electric shock, do not use this blower with any
solid - state speed control device.
• The blower should be securely staked to the ground before use.
1. Remove
Inflatable Projection body and Screen
from its packaging.
2. Unroll and unfold the
Inflatable Projection body and Screen in
the center of the designated area.
3. Attach longer fabric tube to blower unit making sure the tube is not twisted. Wrap drawstring
around the tube and end of blower once, and tie tightly in place.
4. Mounting buckle.
5. Plug in power, Switch power on from blower.
6. Fix the 4 ropes on both sides of the screen.
7. Secure the Inflatable Projection to the ground with the provided stake . To prevent tripping, pull the stake
loops all the way out , then drive stakes completely into the ground .
8. Secure the blower to the ground with the provided stakes.
SET-UP
DEFLATION & STORAGE
1. Turn off the blower and unplug it from the outlet.
2. Pull out the stakes of the screen, also pull out the stakes of the blower.
3. Untie the drawstring from the Intake tube and allow the Inflatable Projection to fully deflate.
4. Undo the grommet.
5. Fold over , Compress air out as you are rolling up inflatable.
6. Fold over only.
7. Put it into the carrying bag.
05

www.costway.com
DISPOSAL
WARNING: Repair patches must be
applied by an adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
INFLATABLE PROJECTION
MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the Inflatable Projection is subject
to wear and deterioration. Inspect for signs of fabric failure;
weak or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the Inflatable Projection or
blower using a dry cloth or a cloth dampened with a neutral,
non-inflammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the event such damage is found, the
product should not be used until properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffic areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Deflate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
06

Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
07

Table of contents
Popular Projection Screen manuals by other brands

Elite Screens
Elite Screens F60XWV1 user guide

Draper
Draper Acumen M XT1000E instructions

SCREENLINE
SCREENLINE LODO instructions

Screen Innovations
Screen Innovations Solo 3 Indoor 575 External installation instructions

Draper
Draper Baronet HW Installation & operating instructions

Isotra
Isotra H1 MEASUREMENT AND ASSEMBLY MANUAL

LG
LG X POWER instruction manual

Da-Lite
Da-Lite Tensioned Conference Electrol Instruction book

Draper
Draper Envoy Installation & operating instructions

Grandview
Grandview LF-PHxx(DY) installation guide

LUMENE
LUMENE Movie Palace Ultra Slim UHD 4K/8K Platinum... user manual

Vivo
Vivo PS-TP-100G instruction manual