Cotytech DM-C1SA2 User manual

Table Thickness
20~60mm
Table Thickness
20~60mm
Hole Diam.
10-60mm
Installation
Each monitor
2-9 kg
4.4-19.8 lbs
Adjust to suitable height
then turn the Wrench
to fasten.
Place Wrench into the
hole to store away for
future use.
M3
1/2 PTO
Installation Manual
www.cotytech.com
888-891-9321
4 pcs
DM-C2SA3
DM-C1SA2
DM-C1SA3

2/2
Warning!
Stored Energy Hazard: The arm mechanism is under tension
and will moveup rapidly by itself, as soon as attached monitor
is removed. For this reason, DO NOT remove monitor unless
the arm has been pulled to full and highest position! Failure to
follow this instruction may result inserious personal injury
and/or equipment damage!
Increase Tension- Turn clockwise;
Decrease Tension-Turn
counterclockwise
If monitor does not stay in place or
movement is stiff, please use wrench
to increase or decrease tension until
movements are smooth.
90°
105 ˚
Important!
Before installing monitor onto the arms, please double check the net weight
of monitor. The mount spring mechanism is set at default for weight range of
2.5kgs – 4.5kgs. For any weight out of this range, either less than 2.5kgs or
more than 4.5kgs, please use M6 wrench for tension adjustments. Be sure to
pull the spring arm to the utmost upright position BEFORE making the adjustments.
Use M3 wrench to
tighten or loosen.
Adjustment
12
3
360˚
360˚ 180˚
3D View
360˚
360˚
180˚
Top View
10.6"
(270mm)
5.5"
(140 mm)
6.2"
(158mm)
27.1"
(688mm)
1-888-891-9321001-951-427-3238
If you want to learn more about Cotytech Mounts, you may visit
http://www.cotytech.com or call
2Lift to the highest position.
1
+To Increase Loading -Turn counterclockwise
- To Decrease Loading -Turn clockwise
2