Technimount System BRACKET PRO 100 Series User manual
BRACKET PRO SERIE®100
USER GUIDE
Return To Table of Contents
2BP100 UG 202002-R01 www.technimount.com
Copyright Technimount System, Subsidiary of Technologies CGC Inc. 2019. All Rights Reserved. No part of this
Bracket Pro Serie® is a registered trademark of Technimount System.
Crossvent® is a registered trademark from Bio-Med.
Technimount Products.
comments to our Customer Service Department at customerser[email protected].
Copyright
www.technimount.com BP100 UG 202002-R01 3
Return To Table of Contents
CORPORATE HEADQUARTERS
Customer Service or Technical Support
3770 Jean Marchand Street, Suite 100
Quebec (QC) G2C 1Y6
Canada
www.technimount.com
T + 1 581.998.9820
F + 1 855.339.6351
or
customerser[email protected]
techsuppor[email protected]m
NOTE:
SERIAL NUMBER LOCATION
Contact Information
4BP100 UG 202002-R01 www.technimount.com
Table of Contents
COPYRIGHT ............................................................................................................................................................ 2
CONTACT INFORMATION....................................................................................................................................... 3
INTRODUCTION ..................................................................................................................................................... 6
Product Description .....................................................................................................................................................6
Intended use of the Product .......................................................................................................................................6
Possible Mounting Options for the Bracket Pro Serie® 100 .....................................................................................7
Symbols and Definitions ...............................................................................................................................................8
Warning / Caution / Note .............................................................................................................................................9
Product Illustration ...................................................................................................................................................10
BRACKET Pro Serie® 100.......................................................................................................................................10
Front View ........................................................................................................................................................................10
Back View ..........................................................................................................................................................................11
Specifications ..............................................................................................................................................................12
Notice ...........................................................................................................................................................................13
SUMMARY OF SAFETY PRECAUTIONS ................................................................................................................ 14
Warning/Caution/Note ..............................................................................................................................................14
INSTALLATION GUIDE .......................................................................................................................................... 16
Removing the Packaging for Installation .................................................................................................................16
Installation of the Bracket onto the Crossvent Ventilator ...................................................................................17
OPERATION GUIDE .............................................................................................................................................. 20
General Operating Guidelines for the Safety MD Transporter ..............................................................................20
Operating the Bracket on the Safety MD Transporter ............................................................................................21
Installing the Bracket onto the Safety MD Transporter..................................................................................21
Rotating the Bracket on the Safety MD Transporter ....................................................................................... 22
REmoving the Bracket with the Medical Device from the Safety MD Transporter ....................................... 23
General Operating Guidelines for the Safety Arm System ......................................................................................24
Operating the Bracket on the Safety Arm System ...................................................................................................25
Installing the Bracket on the Standard Base.....................................................................................................25
Rotating the Bracket on the Standard Surface Base.........................................................................................25
REmoving the Bracket from the Standard Surface Base ..................................................................................26
PART NUMBERS ................................................................................................................................................... 27
Kits and Other Options ..............................................................................................................................................27
MAINTENANCE GUIDE......................................................................................................................................... 28
Cleaning the Bracket System ......................................................................................................................................28
Cleaning Process..................................................................................................................................................28
Cleaning Solutions...............................................................................................................................................28
Removal of Iodine Compounds ...........................................................................................................................29
Preventive Maintenance .............................................................................................................................................29
Lubrication ...........................................................................................................................................................29
Inspection Process and Schedule...............................................................................................................................30
Maintenance Program.........................................................................................................................................30
inspection and Maintenance Record .........................................................................................................................31
Training Record ...........................................................................................................................................................32
Replacement Parts .......................................................................................................................................................33
WARRANTY .......................................................................................................................................................... 34
www.technimount.com BP100 UG 202002-R01 5
Table of Contents
Warranty Policy ..........................................................................................................................................................34
Warranty Options .......................................................................................................................................................35
three Warranty Options for Technimount Products .......................................................................................35
International Warranty Clause .................................................................................................................................35
RETURN POLICY ................................................................................................................................................... 36
Return of Merchandise ..............................................................................................................................................36
Prior to 30 Days ...................................................................................................................................................36
Prior to 45 Days ...................................................................................................................................................36
Prior to 60 Days ...................................................................................................................................................36
Return Merchandise Authorization ...................................................................................................................36
Damaged Merchandise ........................................................................................................................................36
SAE CERTIFICATION ............................................................................................................................................. 37
Return To Table of Contents
6BP100 UG 202002-R01 www.technimount.com
Introduction
PRODUCT DESCRIPTION
The Bracket Pro Serie®
stretcher, the Bracket Pro Serie®
The Bracket Pro Serie®
INTENDED USE OF THE PRODUCT
The Bracket Pro Serie®
during intra and inter-hospital transport. It is designed to be installed on the equipment as described in this user guide.
according to its intended use as outlined in this user guide.
www.technimount.com BP100 UG 202002-R01 7
Return To Table of Contents
Introduction
POSSIBLE MOUNTING OPTIONS FOR THE BRACKET PRO SERIE®100
www.technimount.com BP100 UG 202002-R01 9
Return To Table of Contents
WARNING / CAUTION / NOTE
SYMBOL DESCRIPTION
not avoided, may result in minor or moderate injury to the user
device to avoid damage that may occur as a result of use or misuse.
NOTE
Introduction
Return To Table of Contents
10 BP100 UG 202002-R01 www.technimount.com
PRODUCT ILLUSTRATION
BRACKET PRO SERIE®100
Front View
Introduction
Acetal Feet to Protect
when Placed on the
Floor or Ground
High-Density
Aluminum
with Silver-
Main Assembly
and Medical
Device
are Installed
Back Plate is
Installed on the
Medical Device First
and then on the
Main Assembly
www.technimount.com BP100 UG 202002-R01 11
Return To Table of Contents
PRODUCT ILLUSTRATION (CONTINUED)
BRACKET PRO SERIE ®100 (CONTINUED)
Back View
Introduction
Disc is used for
or Arm Systems
Back Plate is
Installed on the
Medical Device First
and then on the
Main Assembly
Acetal Feet to Protect
when Placed on the
Floor or Ground
High-Density
Aluminum
with Silver-
Main Assembly
and Medical
Device
are Installed
Return To Table of Contents
12 BP100 UG 202002-R01 www.technimount.com
Introduction
SPECIFICATIONS
Product Name Bracket Pro Serie®100
Compability of Medical Device
Environment of Usage
Device Secon Material
Boom Disc Secon Material Aluminum with Stainless Steel Insert and Peek Cushions
An-Rotaon Back Disc Material
Temperature of Usage
Impact Resistance – Ground - USA SAE J3043 (30 G) Plus 10% Safety Factor in process
Medical Device Retaining System Device Retained on Main Assembly with Back Plate
Retaining System
Transportaon Compability System
•
•
•
•
•
Features •
• Access to all Connectors and Accessories
Physical Overall Dimensions
Weight (Bracket Only)
Bracket Only – 3.78 lbs
Crossvent 2i+ Device 7.65 lbs
Part Number Bracket only - 1200-10-CV
www.technimount.com BP100 UG 202002-R01 13
Return To Table of Contents
Introduction
NOTICE
Technimount System
+ 1 581.998.9820
Return To Table of Contents
14 BP100 UG 202002-R01 www.technimount.com
WARNING/CAUTION/NOTE
9Always hold the Bracket with both hands when you manipulate it.
9Operate the bracket only as described in this user guide.
9Do not modify the Bracket, or any components of Technimount systems. Modifying the product can cause
9
with Technimount System products.
9
9
9
9
9
9
9
9
9
void the product warranty.
9Failure to properly clean or dispose of corrosive products will increase the risk of premature damage and may
9
Summary of Safety Precautions
www.technimount.com BP100 UG 202002-R01 15
Return To Table of Contents
WARNING/CAUTION/NOTE (CONTINUED)
CAUTION
9
9Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts.
9
with Technimount Systems.
NOTE
9Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If such
products are used to clean Technimount equipment, the equipment must be rinsed with clean water and thoroughly
9
9
9
warranty of the product.
9This user guide should be considered a permanent part of the Bracket, and should remain with the product even if
the equipment is subsequently sold.
9
Customer Service or Technical Support at +1.581.998.9820.
Summary of Safety Precautions
Return To Table of Contents
16 BP100 UG 202002-R01 www.technimount.com
Installation Guide
REMOVING THE PACKAGING FOR INSTALLATION
1.
2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to
3.
4. The Bracket System must work properly before being put into service.
5.
TOOLS REQUIRED FOR INSTALLATION
assistance, please contact our Technical Support team at techsupport@technimount.com
9
9
NOTE
9
9
www.technimount.com BP100 UG 202002-R01 17
Return To Table of Contents
1. The Bracket Pro Serie®100 is designed to be
2. Locate the metal plate on the back of the
and will be replaced by the back plate from the
bracket assembly.
3. Remove the metal plate located on the back of
4. This part will not be used with the main bracket
assembly.
Installation Guide
INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR
18 BP100 UG 202002-R01 www.technimount.com
Return To Table of Contents
INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR
(CONTINUED)
5.
6.
7.
8. Tighten all
screws.
9.
10. Place onto the main assembly.
11.
assembly.
Installation Guide
www.technimount.com BP100 UG 202002-R01 19
Return To Table of Contents
Installation Guide
INSTALLATION OF THE BRACKET ONTO THE CROSSVENT VENTILATOR
(CONTINUED)
12.
screws.
13. Back view of mount installed on the main
assembly.
14. It is now ready for transport.
15. Front view with mount installed on the Crossvent
Return To Table of Contents
20 BP100 UG 202002-R01 www.technimount.com
9
GENERAL OPERATING GUIDELINES FOR THE SAFETY MD TRANSPORTER
9Use the Safety MD Transporter only as described
in the User Guide.
9
product before using the Safety MD Transporter.
9Always inspect the Micro Base and the Safety MD
Transporter for any issue or damage before every
use.
9Installing or removing the Safety MD Transporter
requires a minimum of one (1) trained operator.
9Do not remove the Safety MD Transporter while
9
Operation Guide
Table of contents
Other Technimount System TV Mount manuals
Technimount System
Technimount System BRACKET PRO 151 Series User manual
Technimount System
Technimount System PRO 85 Series User manual
Technimount System
Technimount System PRO 160 Series User manual
Technimount System
Technimount System PRO 150 Series User manual
Technimount System
Technimount System PRO 121-GR1 Series User manual
Technimount System
Technimount System PRO 106 Series User manual
Technimount System
Technimount System PRO 71 Series User manual
Technimount System
Technimount System PRO 60-SD Series User manual
Technimount System
Technimount System PRO 77 Series User manual
Technimount System
Technimount System PRO 152 Series User manual
