Cowon CT5 User manual

User Guide 1.0EN
CT5
COWON

2
COWON CT5
+ Package Contents
COWON
C
T
5
Quic
k
Guid
e
v
er
.
1.0
W
COWON CT5 Portable Charging Cradle Quick Guide
Small(2EA) Medium(2EA) Large(2EA)
Ear Tips Micro USB Cable
* Actual package contents may differ from the above images.

2 3
COWON CT5
+ Before you start _ Charging + Using the Product _ Power On / Off
CT5 Charging
* Charging : The white LED
Indicator on your earphones
turns on
* Charging Complete : The white
LED Indicator on your earphones
turns off
Charge the Charging
Cradle
Auto
Manual
Charging Status : Charging
cradle LED Indicator blink blue
0%~25% = 1time
25%~50% = 2times
50%~75% = 3times
75%~100% = 4times
Fully Charged = Stays solid Power On / Off : 4 Sec Press
In : Power Off
Out : Power On
*Please charge the charging cradle periodically.
When the cradle battery is discharged, the earphone units may turn-on
instead of being charged, causing the earphone to be discharged.

4
COWON CT5
Dual mode
Single mode
+ Using the Product _ Pairing & connection
+
LR
1. When both earphones are removed at the same time from the charging
cradle, they will automatically turn on , connect to each other, and enter
pairing mode following an audible beep.
2. Turn on Bluetooth on your smartphone or Bluetooth-capable device, and
select ‘CT5 Bluetooth’ from the list of detected devices to pair and connect
automatically.
*To use Dual Mode, both the left and right earphones must be turned on.
1. As previously shown, turn on the both L and R units of the CT5 and
connect to Dual Mode.
2. Then, only put L unit into the chagring cradle and select the detected
‘CT5 Bluetooth’ on your smartphone. The pairing of the R unit will be
completed, and connected automatically.
3. Now, between L and R units, you can use only the desired unit in Single
mode connected automatically by removing it from the charging cradle.
*In Single Mode, both the left and right earphones will be detected as ‘CT5
Bluetooth’. You can easily change their names to differentiate between
each unit. (Android Smartphone)
*In Dual Mode, L unit connects to your smartphone.
*By using the CT5 in Single Mode, you can alternate between charging the
left and right earphones ofr extended use. (Audio books, Podcasts, etc.)
*Since Single Mode uses only one earphone, you can stay aware of
environmental sounds and use the device more safely when walking or
bicycling.
After the initial pairing, the CT5 and your smartphone will connect
automatically when the CT5 is on and Bluetooth is enabled on your
phone.
Dual mode : The CT5’s left and right earphones can be used together in
stereo.
Single mode : The CT5’s left and right earphones can be used individually
in mono.
*Use one of the following methods to switch from Single Mode to Dual Mode.
- Press the multifunction button on the earphone that is not connected and
wait briefly to switch to Dual Mode.
- Turn off both units, then turn them on again (power cycling). Connect the
units in Dual Mode.
*Keep the product and a mobile phone within 1 meter when pairing.
*If passkey input is required, enter a password or a PIN No. ‘0000’.
*When the CT5 is off, press and hold the multifunction button for 6 seconds to
enter pairing mode.
*When powered on, the earphones will automatically connect to the most
recently connected devices.
LR
LED flashes alternately
white and blue

4 5
COWON CT5
+ Using the Product _ Listening to Music·Calling
*When using Dual Mode, sound will only be output to the left earphone during calls.
*In Single Mode, each earphone will output sound with both microphones enabled for use.
*Press and hold the multifunction button for 1 second to launch the voice recognition feature of your smartphone or tablet.
(Android OS: Google Now / iOS:Siri / Window OS: Cortana - Except during calls)
Answering a call
·
Ending a call
Rejecting a call
Play·Pause
Next Track
Previous Track
Listening to Music Calling