Cozy N Safe CHAMPION EST80 User manual
说明书.indd 1
2019/9/17 下午1:28
Ver 0.1.0
Without Compromise...
Instruction Manual
EST80
2019/9/17 下午1:28
WARNING
Read the instructions carefully before use and keep them
for future reference.
Your child’s safety may be affected if you do not follow these instructions.
The Cozy N Safe Champion Stroller is suitable for 0 - 36 months and
up to 15kg.
Never leave your child unattended.
Ensure that all the locking devices are engaged before use.
To avoid injury ensure that your child is kept at a safe distance
when unfolding and folding this product.
Do not let your child play with this product.
Always use the restraint system.
This product is not suitable for running or skating.
Any load attached to the handle, backrest or sides may affect the stability.
Never use stairs or escalators with your child in the stroller.
Never use the stroller near an open fire.
Never let your child climb into or out of the stroller alone.
Only use the accessories or spare parts sold or approved
by the manufacturer, using other accessories could be dangerous
and could cause harm to you or your child.
The brake must always be on when putting your child in or taking
them out of the stroller.
Always apply the brake whenever the stroller is stationary.
Do not use the pushchair if any of the parts are damaged, torn or missing.
Push down the pedal between the rear wheels to activate the brake.
To release the brake, push the other side of the pedal down again with
your foot.
Always hold the pushchair on a sloping surface, even when the brake
is engaged.
Always ensure that the safety bar (carrying handle) is correctly
engaged to the seat/cot unit before use.
Do not overload the basket. Maximum load is 3kg.
This stroller is to be used by only one child at a time.
To avoid the risk of suffocation, keep all plastic bags and
packaging out of reach of children.
MAIN PARTS
说明书.indd 20-21 2019/9/17 下午1:28
Canopy
Second lock
Safety bar
Front wheel
Brake pedal
Rear wheel
Folding catch
Swerve lock button
Handle adjust button
Folding hook
Seat recline button
Folding trigger
Seat unit release button
Contents
INSTRUCTIONS
Unfolding the chassis
A. As shown in pic.A,
please unlock the chassis
lock hook in the direction
of the arrow.
B. Unfold the chassis until it fully
unfolds and locks into position
as shown in pic.C.
说明书.indd 22-23 2019/9/17 下午1:28
Seat Chassis
Rear Wheels
Rain Cover
Front Wheels
Sun canopy
A. As shown in pic.A, please
insert the axle of the front
wheel into the front hole in
the chassis in the direction
of the arrow, you will hear a
‘click’ when it is installed
correctly. (The wheels are
NOT handed. Any front
wheel can be installed
either on the left or right side.)
B.
Installing/removing the front wheels
As shown in pic.B, you can
remove the front wheel by
pressing the quick release
button (see arrow 1) and
pulling the front wheel
downward as per
arrow 2.
A. As shown in pic.A, please
insert the axle of the rear
wheel into the rear hole in
the chassis in the direction
of the arrow, you will hear a
’click’ when it is installed
correctly. (The wheels are
NOT handed. Any rear
wheel can be installed
either on the left or right side.)
B. As shown in pic.B, you can
remove the rear wheel by
pressing the quick release
button (see arrow 1) and
pulling the rear wheel
outwards as per
arrow 2.
Installing/removing the rear wheels
说明书.indd 24-25 2019/9/17 下午1:28
2
1
Quick release
button
Quick release
button
1
C. You can lock the front wheels
into a forward facing position
by engaging the swerve lock
button. Align the button and
the groove as per pic.C.
and push upwards
on the button.
2
2
Adjusting the handlebar &
Adjusting the seat angle
A. As shown in pic.A, press the
handle adjustment buttons
both sides of the handlebar.
While keeping both buttons
pressed, you can adjust the
height by rotating
the handle up and down.
B. To adjust the seat recline, pull
up the seat recline button,
you can then lower the angle
of the seat. To raise the
angle simply lift the back
of the seat upwards until
you hear a ‘click’.
A. As shown in pic.A, align the
sun canopy locks with the
rectangular guides on the
chassis. (with the zip facing the
back of the seat). Then
slide the canopy locks
downwards onto the guides
until you hear a ‘click’.
Note: Ensure you don’t catch
the covers.
Align the zips on the canopy
and seat and zip them up.
Installing/removing the Canopy
B. As shown in pic.B, push the
lever of canopy lock in
the direction of arrow 1,
while sliding the canopy upwards
in the direction of arrow 2.
说明书.indd 26-27 2019/9/17 下午1:28
1
1
2
2
说明书.indd 28-29 2019/9/17 下午1:28
NOTICE :
Always use the harness belt correctly.
A.
A. D.B. C.
C.
B.
D.
E.
5-point restraint system
Assemble and detach the seat unit
& Change the direction of the seat
As shown in pic.A, align the
connectors on the seat with
the receiver slots on the
chassis. Push the seat unit
downward. You will hear
a ‘click’ sound, when the
seat is locked in place.
(Always double check
both connectors are locked.)
Press the button in the middle to
release the safety harness.
To secure the safety harness,
align the bottom side harness into
the top side harness. Then slide
the clip in to safety buckle until you
hear a ‘click’ sound. Then do the
same for the other side.
As shown in pic.E, slide the
adjusters up and down on all
harness straps to adjust
the belt length.
To remove the seat, pull
up on the quick release
buttons as shown in pic.B.
While holding both buttons
up, pull the seat upwards
away from the chassis.
The seat can be used in
both forward or parent facing
positions. To change the
facing position, follow the
above steps to remove
the seat, then rotate the
seat 180° and then follow
the above instructions
to reattach the seat.
A.
B.
C.
Adjusting the footrest
As shown in pic.A & B, to
raise the footrest simply
lift up the footrest until you
hear a ‘click’. To lower, press the
footrest adjustment buttons on
both sides of the seat, you can
then adjust the footrest. There
are 2 possible positions.
说明书.indd 30-31 2019/9/17 下午1:28
Adjust restraint shoulder height
Extending the Canopy
The shoulder straps have
three height positions for your
growing child. To change the
strap position. Firstly,
remove the buckle from the
harness. Secondly, feed the
harness through the correct
loop for your child. Then
reattach the harness to the
buckle and adjust to the
correct height.
To extend the canopy,
simply pull the canopy out
from the front. To retract
the canopy, push towards
the back of the seat from
the front.
To use the extra ventilated
section of the canopy,
unzip the zip located
on the canopy and pull
from the front to extend
the canopy an extra step.
To retract the ventilation section, push the canopy towards the rear of the seat so the zips meet
and re-zip up this section.
AB
B
C
A.
A. The brake is situated on the
bar between the rear wheels.
Press down on the pedal’s
left side to apply the brake.
B.To release the brake, press
the other side of the pedal
down.
Note: The brake will not
release if you are pushing
or pulling the stroller when
pressing the pedal.
Applying the brake
说明书.indd 32-33 2019/9/17 下午1:28
A. As shown in pic.A, align the
safety bar with its receiver,
and insert it as shown, until
you hear a ‘click’.
B. As shown in pic.B, press the
safety bar buttons on both
sides (see arrow 1) and
gently remove (see arrow 2).
NOTE: Please note the
correct position of the safety
bar. It must be installed in this
way.
Installing/removing the safety bar
2
1
2
说明书.indd 34-35 2019/9/17 下午1:28
Fold the stroller with the seat
As shown in pic.A, first fold the canopy
(see arrow 1). Press the second
lock button with your thumb, and
use your two index fingers to pull up
the two triggers either side of the
stroller at the same time (see arrow 2).
A. Insert the adapters into the receiver
slot on the chassis. The adapters are
handed and will only fit in one way.
You will hear a ‘click’ when the
adapter has been successfully
installed in the correct position.
Then please follow the instructions
on the car seat / baby carrier.
A.
As shown in pic.B, push down on the
chassis in the direction of arrow 3
until the chassis is locked as pic.C.
B. To remove the adapters push
the release button in (arrow 1.) Then
pull the adapter upwards away
from the chassis (arrow 2).
B.
Second lock button
2
3
1
Attention:
When folding the stroller, the seat unit must be
facing forward with backrest at the most upright position.
When you unfold the stroller, seat unit must face up
and in seat mode.
Using 3rd party baby carriers / car seat
The Champion can be used with the most popular brands of car seats such as Maxi-Cosi
and of course our own Cozy N Safe car seats. For a full list of compatible car seats please
check www.cozynsafe.com
2
1
OPTIONAL ACCESSORIES
Rain cover
Foot muff
MAINTENANCE
Clean the fabric with lukewarm water and non abrasive soap.
Rinse with fresh water and leave to dry.
Never use bleach or other chemical detergents.
Periodically (approximately once a month) treat the
wheels and metal parts with Teflon or silicon spray to ensure
the stroller continues to run smoothly.
Check the screws, small parts and the stitching to avoid
danger or any breakages, replace the broken parts in time
when necessary.
说明书.indd 34-35 2019/9/17 下午1:28
WARRANTY
The 12-month warranty period commences on the day of purchase.
The warranty covers manufacturing faults, but not the exchange
or return of the product.
The warranty is only valid if you supply the following items:
1) Proof of purchase
2) A detailed description of the defect.
The warranty is not valid in the following cases:
The products is returned without the original receipt of purchase.
The defects and/or damage are caused by improper use and/or
by modifications made by the customer.
The discolouration/stains were caused by washing, rain or sun.
The wear and tear is a result of normal usage.
Any repairs do not extend the warranty period.
Full warranty Terms & Conditions can be found on
www.cozynsafe.com
The Cozy N Safe Champion meets the highest safety
standards: Europe: BS EN1888-1:2018
Without Compromise...
We’d love to see your pics!
Share them using #imcozynsafe
Cozy N Safe
Oxford Street, Wolverhampton, West Midlands, WV14 7DP, U.K.
Tel: +44 (0) 1902 494905
Fax: +44 (0) 1902 490211
Email: [email protected]
Website: www.cozynsafe.com
Table of contents
Other Cozy N Safe Stroller manuals
