CPR v.103 User manual

www.cprcallblocker.com
USER GUIDE
V.103/104/105
®

Thank you
for purchasing CPR Call Blocker.
You are now in control of your privacy.
The CPR Team

INTRODUCTION 1
Congratulations on your new purchase!
Before using this user guide please read the following important information:-
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
to work eectively.
• Caller ID is telephone service that provides for subscribers the telephone number of a
caller, which appear on a display as the call is being received. It is available from most
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
available free with BT and most other providers, just dial 150 to nd out.
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
and cordless phones. It protects all the phones that are plugged into it. If you need a
number of extensions in your house we recommend that you use a modern multi-handset
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
protect all your phones.
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
extension sockets in your house. This might cause other phones to ring once if a blocked
number is calling.
• Some phones automatically check the 1571 network voicemail service at regular intervals
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
do not use 1571 phones with The CPR Call Blocker
Congratulations on your new purchase!
Before using this user guide please read the following important information:-
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
to work eectively.
• Caller ID is telephone service that provides for subscribers the telephone number of a
caller, which appear on a display as the call is being received. It is available from most
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
available free with BT and most other providers, just dial 150 to nd out.
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
and cordless phones. It protects all the phones that are plugged into it. If you need a
number of extensions in your house we recommend that you use a modern multi-handset
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
protect all your phones.
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
extension sockets in your house. This might cause other phones to ring once if a blocked
number is calling.
• Some phones automatically check the 1571 network voicemail service at regular intervals
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
do not use 1571 phones with The CPR Call Blocker

SETTING UP
CPR CALL BLOCKER
02.
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit, this is shown when the phone is off the receiver or when on a call. If you are using
a cordless phone then press the Call Button for a dial tone.
If you have no dial tone or no red light you will need to disconnect the cables then
reconnect using the LINE 2 and TEL 2 ports.
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit, this is shown when the phone is off the receiver or when on a call. If you are using
a cordless phone then press the Call Button for a dial tone.
If you have no dial tone or no red light you will need to disconnect the cables then
reconnect using the LINE 2 and TEL 2 ports.
12
Disconnect line cable from
your telephone and plug into
the LINE 1 port of the
Call Blocker
Congratulations on your new purchase!
Before using this user guide please read the following important information:-
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
to work eectively.
• Caller ID is telephone service that provides for subscribers the telephone number of a
caller, which appear on a display as the call is being received. It is available from most
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
available free with BT and most other providers, just dial 150 to nd out.
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
and cordless phones. It protects all the phones that are plugged into it. If you need a
number of extensions in your house we recommend that you use a modern multi-handset
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
protect all your phones.
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
extension sockets in your house. This might cause other phones to ring once if a blocked
number is calling.
• Some phones automatically check the 1571 network voicemail service at regular intervals
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
do not use 1571 phones with The CPR Call Blocker
Congratulations on your new purchase!
Before using this user guide please read the following important information:-
• Call Blocker protects a single corded phone, or a cordless phone with additional handsets
• Caller Identity service (Caller ID) from your telephone provider is required for Call Blocker
to work eectively.
• Caller ID is telephone service that provides for subscribers the telephone number of a
caller, which appear on a display as the call is being received. It is available from most
telephone companies. To register for Caller ID contact your telephone operator - Caller ID is
available free with BT and most other providers, just dial 150 to nd out.
• The CPR Call Blocker will work with a wide range of telephone equipment including corded
and cordless phones. It protects all the phones that are plugged into it. If you need a
number of extensions in your house we recommend that you use a modern multi-handset
cordless phone system (Also known as a DECT system) so that the CPR Call Blocker can then
protect all your phones.
• We recommend that you do not use the CPR Call Blocker with phones plugged into other
extension sockets in your house. This might cause other phones to ring once if a blocked
number is calling.
• Some phones automatically check the 1571 network voicemail service at regular intervals
and display a ‘Message waiting’ light. These are called 1571 phones. We recommend that you
do not use 1571 phones with The CPR Call Blocker

The easiest way to block Nuisance Callers is to use the BLOCK NOW button located on
the top of the Call Blocker.
When a Nuisance Caller gets through press the ‘BLOCK NOW’ button and then hang up
the call, this Caller will now be blocked from calling again.
You can also use this function without having to answer the phone.
For example: If an unfamiliar number is calling, press the BLOCK NOW button and the
CPR Call Blocker will stop that number from calling again.
The Block Now Button only works with Visible numbers. If you are receiving nuisance
calls from ‘WITHHELD’ or ‘INTERNATIONAL’ numbers please use the programming codes
on pages 5 and 6.
The easiest way to block Nuisance Callers is to use the BLOCK NOW button located on
the top of the Call Blocker.
When a Nuisance Caller gets through press the ‘BLOCK NOW’ button and then hang up
the call, this Caller will now be blocked from calling again.
You can also use this function without having to answer the phone.
For example: If an unfamiliar number is calling, press the BLOCK NOW button and the
CPR Call Blocker will stop that number from calling again.
The Block Now Button only works with Visible numbers. If you are receiving nuisance
calls from ‘WITHHELD’ or ‘INTERNATIONAL’ numbers please use the programming codes
on pages 5 and 6.
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit, this is shown when the phone is off the receiver or when on a call. If you are using
a cordless phone then press the Call Button for a dial tone.
If you have no dial tone or no red light you will need to disconnect the cables then
reconnect using the LINE 2 and TEL 2 ports.
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit, this is shown when the phone is off the receiver or when on a call. If you are using
a cordless phone then press the Call Button for a dial tone.
If you have no dial tone or no red light you will need to disconnect the cables then
reconnect using the LINE 2 and TEL 2 ports.
INSTALLATION
DIAGRAM
line Cable
Short Black
Cable Provided
Telephone
BLOCK NOW
23
Main Wall
Socket

Telephone
34
Programming a number into "Blocking" list
1. Get a dial tone and input * 7 # you will hear a "Beep”
2. Then enter the telephone number you wish to block, followed by the # key,
You will hear a ‘beep’ to conrm success.
3. Enter the next number or hang up to complete setup.
Erasing one Number from the "Blocking" list
1. Get a dial tone and input * 6 # you will hear a ‘beep’
2. Then enter the telephone number you wish to delete followed by the # key,
you will hear a ‘beep’ to conrm success.
3. Hang up to complete setup.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input * 1 # * 1 #
You will hear a ‘beep’ to conrm success.
Note:
Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON..
Programming a number into "Blocking" list
1. Get a dial tone and input * 7 # you will hear a "Beep”
2. Then enter the telephone number you wish to block, followed by the # key,
You will hear a ‘beep’ to conrm success.
3. Enter the next number or hang up to complete setup.
Erasing one Number from the "Blocking" list
1. Get a dial tone and input * 6 # you will hear a ‘beep’
2. Then enter the telephone number you wish to delete followed by the # key,
you will hear a ‘beep’ to conrm success.
3. Hang up to complete setup.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input * 1 # * 1 #
You will hear a ‘beep’ to conrm success.
Note:
Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON..
103 MODEL PROGRAMMING
CODES

Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * * 7 # * #
2. To Turn Off : Get a dial tone and input * * 6 # * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all IP Dialling systems (skype / overseas nuisance call centres)
1. To Turn On: Get a dial tone and input * * 7 # 6*#
2. To Turn Off : Get a dial tone and input * * 6 # 6*#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * * 7 # 0#
2. To Turn Off : Get a dial tone and input * * 6 # 0#
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input ** 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON.
Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * * 7 # * #
2. To Turn Off : Get a dial tone and input * * 6 # * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all IP Dialling systems (skype / overseas nuisance call centres)
1. To Turn On: Get a dial tone and input * * 7 # 6*#
2. To Turn Off : Get a dial tone and input * * 6 # 6*#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * * 7 # 0#
2. To Turn Off : Get a dial tone and input * * 6 # 0#
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input ** 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON.
6
104 /105 MODEL
PROGRAMMING CODES
Block Last Calling Number
1. To block last number: Get a dial tone and input * * 2 # * 2 #
You will hear a ‘beep’ after each # to conrm success.
Turning Call Blocker On and Off
1. To Turn On: Get a dial tone and input * * 4 # *4#
2. To Turn Off : Get a dial tone and input * * 3 # *3#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “Withheld” Callers
1. To Turn On: Get a dial tone and input * * 7 # 7*#
2. To Turn Off : Get a dial tone and input * * 6 # 7*#
You will hear a ‘beep’ after each # to conrm success.
Alternative “Withheld” blocking function ( Use this if the conventional code doesn’t work)
1. To Turn On: Get a dial tone and input * * 7 # #
2. To Turn Off : Get a dial tone and input * * 6 # #
You will hear a ‘beep’ after each # to conrm success.
Block Last Calling Number
1. To block last number: Get a dial tone and input * * 2 # * 2 #
You will hear a ‘beep’ after each # to conrm success.
Turning Call Blocker On and Off
1. To Turn On: Get a dial tone and input * * 4 # *4#
2. To Turn Off : Get a dial tone and input * * 3 # *3#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “Withheld” Callers
1. To Turn On: Get a dial tone and input * * 7 # 7*#
2. To Turn Off : Get a dial tone and input * * 6 # 7*#
You will hear a ‘beep’ after each # to conrm success.
Alternative “Withheld” blocking function ( Use this if the conventional code doesn’t work)
1. To Turn On: Get a dial tone and input * * 7 # #
2. To Turn Off : Get a dial tone and input * * 6 # #
You will hear a ‘beep’ after each # to conrm success.

104 /105 MODEL
PROGRAMMING CODES
Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * * 7 # * #
2. To Turn Off : Get a dial tone and input * * 6 # * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all IP Dialling systems (skype / overseas nuisance call centres)
1. To Turn On: Get a dial tone and input * * 7 # 6*#
2. To Turn Off : Get a dial tone and input * * 6 # 6*#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * * 7 # 0#
2. To Turn Off : Get a dial tone and input * * 6 # 0#
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input ** 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON.
Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * * 7 # * #
2. To Turn Off : Get a dial tone and input * * 6 # * #
You will hear a ‘beep’ after each # to conrm success.
Blocking all IP Dialling systems (skype / overseas nuisance call centres)
1. To Turn On: Get a dial tone and input * * 7 # 6*#
2. To Turn Off : Get a dial tone and input * * 6 # 6*#
You will hear a ‘beep’ after each # to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * * 7 # 0#
2. To Turn Off : Get a dial tone and input * * 6 # 0#
You will hear a ‘beep’ after each # to conrm success.
Resetting the Call Blocker back to factory settings
1. Get a dial tone and input ** 1 # * 1 #
You will hear a ‘beep’ after each # to conrm success.
Note: Three "Beeps” indicated that an error has occurred - Either a number has been
entered incorrectly or the function is already ON.
7
8
Q. Will the CPR Call Blocker work with my broadband?
A. The CPR Call Blocker will work ne alongside your broadband connection - But it is
important to use broadband Filters at the wall socket.
Q. How much power does the CPR Call Blocker use?
A. The CPR Call Blocker uses only the power from your telephone line which is of no cost
to you!
Q. Which landline providers does the CPR Call Blocker support?
A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin
Q. Do I need caller ID for this product to work?
A. Yes. Caller ID should be enabled on your telephone line for the product to work
effectively. Caller ID Display is available free for BT customers
Q. Can I use any telephone with the CPR Call Blocker?
A. The CPR Call Blocker will work with a wide range of modern telephone equipment -
cordless DECT phones, cordless analogue phones.
Q. Can I use the CPR Call Blocker with extension telephone sockets?
A. The CPR Call Blocker is designed to work on one telephone socket. If you want
additional phones around the home it is best to use a DECT phone with multiple
cordless handsets. The Call Blocker will then be connected to the base unit and help
protect the additional DECT handsets.
Q. Will the CPR Call Blocker work with my broadband?
A. The CPR Call Blocker will work ne alongside your broadband connection - But it is
important to use broadband Filters at the wall socket.
Q. How much power does the CPR Call Blocker use?
A. The CPR Call Blocker uses only the power from your telephone line which is of no cost
to you!
Q. Which landline providers does the CPR Call Blocker support?
A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin
Q. Do I need caller ID for this product to work?
A. Yes. Caller ID should be enabled on your telephone line for the product to work
effectively. Caller ID Display is available free for BT customers
Q. Can I use any telephone with the CPR Call Blocker?
A. The CPR Call Blocker will work with a wide range of modern telephone equipment -
cordless DECT phones, cordless analogue phones.
Q. Can I use the CPR Call Blocker with extension telephone sockets?
A. The CPR Call Blocker is designed to work on one telephone socket. If you want
additional phones around the home it is best to use a DECT phone with multiple
cordless handsets. The Call Blocker will then be connected to the base unit and help
protect the additional DECT handsets.

Safety
• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive
cleaning products.
• Do not open CPR Call Blocker as there are voltages inside the unit.
Environmental
• CPR Call Blocker is intended for indoor use only.
• Do not submerge any part of CPR Call Blocker in water and do not use it in
damp or humid conditions, such as in bathrooms.
• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.
• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.
We recommend that you unplug the telephone line cord for the duration of the storm
as such damage is not covered by the guarantee.
Data Protection
We are registered under the Data Protection Act 1998 (registration Z2140320 ).
The data controller is CPR Global Limited of York Chambers,
York Street, Swansea , SA1 3LZ
We will process personal data disclosed by you in accordance with
our privacy policy published on our web site (www.cprcallblocker.com)
Safety
• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive
cleaning products.
• Do not open CPR Call Blocker as there are voltages inside the unit.
Environmental
• CPR Call Blocker is intended for indoor use only.
• Do not submerge any part of CPR Call Blocker in water and do not use it in
damp or humid conditions, such as in bathrooms.
• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.
• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.
We recommend that you unplug the telephone line cord for the duration of the storm
as such damage is not covered by the guarantee.
Data Protection
We are registered under the Data Protection Act 1998 (registration Z2140320 ).
The data controller is CPR Global Limited of York Chambers,
York Street, Swansea , SA1 3LZ
We will process personal data disclosed by you in accordance with
our privacy policy published on our web site (www.cprcallblocker.com)
FREQUENTLY ASKED QUESTIONS 8
Q. Will the CPR Call Blocker work with my broadband?
A. The CPR Call Blocker will work ne alongside your broadband connection - But it is
important to use broadband Filters at the wall socket.
Q. How much power does the CPR Call Blocker use?
A. The CPR Call Blocker uses only the power from your telephone line which is of no cost
to you!
Q. Which landline providers does the CPR Call Blocker support?
A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin
Q. Do I need caller ID for this product to work?
A. Yes. Caller ID should be enabled on your telephone line for the product to work
effectively. Caller ID Display is available free for BT customers
Q. Can I use any telephone with the CPR Call Blocker?
A. The CPR Call Blocker will work with a wide range of modern telephone equipment -
cordless DECT phones, cordless analogue phones.
Q. Can I use the CPR Call Blocker with extension telephone sockets?
A. The CPR Call Blocker is designed to work on one telephone socket. If you want
additional phones around the home it is best to use a DECT phone with multiple
cordless handsets. The Call Blocker will then be connected to the base unit and help
protect the additional DECT handsets.
Q. Will the CPR Call Blocker work with my broadband?
A. The CPR Call Blocker will work ne alongside your broadband connection - But it is
important to use broadband Filters at the wall socket.
Q. How much power does the CPR Call Blocker use?
A. The CPR Call Blocker uses only the power from your telephone line which is of no cost
to you!
Q. Which landline providers does the CPR Call Blocker support?
A. The CPR Call Blocker will work on all domestic telephone lines including BT & Virgin
Q. Do I need caller ID for this product to work?
A. Yes. Caller ID should be enabled on your telephone line for the product to work
effectively. Caller ID Display is available free for BT customers
Q. Can I use any telephone with the CPR Call Blocker?
A. The CPR Call Blocker will work with a wide range of modern telephone equipment -
cordless DECT phones, cordless analogue phones.
Q. Can I use the CPR Call Blocker with extension telephone sockets?
A. The CPR Call Blocker is designed to work on one telephone socket. If you want
additional phones around the home it is best to use a DECT phone with multiple
cordless handsets. The Call Blocker will then be connected to the base unit and help
protect the additional DECT handsets.

Safety
• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive
cleaning products.
• Do not open CPR Call Blocker as there are voltages inside the unit.
Environmental
• CPR Call Blocker is intended for indoor use only.
• Do not submerge any part of CPR Call Blocker in water and do not use it in
damp or humid conditions, such as in bathrooms.
• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.
• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.
We recommend that you unplug the telephone line cord for the duration of the storm
as such damage is not covered by the guarantee.
Data Protection
We are registered under the Data Protection Act 1998 (registration Z2140320 ).
The data controller is CPR Global Limited of York Chambers,
York Street, Swansea , SA1 3LZ
We will process personal data disclosed by you in accordance with
our privacy policy published on our web site (www.cprcallblocker.com)
Safety
• Simply clean CPR Call Blocker with a damp cloth. Do not use chemicals or abrasive
cleaning products.
• Do not open CPR Call Blocker as there are voltages inside the unit.
Environmental
• CPR Call Blocker is intended for indoor use only.
• Do not submerge any part of CPR Call Blocker in water and do not use it in
damp or humid conditions, such as in bathrooms.
• Do not expose CPR Call Blocker to re, explosive or other hazardous conditions.
• There is a slight chance that CPR Call Blocker could be damaged by an electrical storm.
We recommend that you unplug the telephone line cord for the duration of the storm
as such damage is not covered by the guarantee.
Data Protection
We are registered under the Data Protection Act 1998 (registration Z2140320 ).
The data controller is CPR Global Limited of York Chambers,
York Street, Swansea , SA1 3LZ
We will process personal data disclosed by you in accordance with
our privacy policy published on our web site (www.cprcallblocker.com)
GENERAL INFORMATION 9

Need more help?
If you need further help setting up CPR Call Blocker please email or phone through to our
Technical support team for help with problems, or advice.
CPR Global
Post :
CPR Global LTD
York Chambers
York Street
Swansea
UK
SA1 3LZ
E-mail : [e-mail]
Phone : [phone]
© CPR Global 2012
Patent Number - 1200049.3
www.cprcallblocker.com
Need more help?
If you need further help setting up CPR Call Blocker please email or phone through to our
Technical support team for help with problems, or advice.
CPR Global
Post :
CPR Global LTD
York Chambers
York Street
Swansea
UK
SA1 3LZ
E-mail : [e-mail]
Phone : [phone]
© CPR Global 2012
Patent Number - 1200049.3
www.cprcallblocker.com
NEED MORE
HELP?
04.
Disposal instructions
Waste electronic equipment should be
separated from your normal household
waste and taken to your local recycling
centre for disposal, or back to where
you bought the equipment.
Proper recycling of electronic equipment will help

For more products from CPR Global, please visit our website
www.cprdistribution.com
And view our fantastic range of innovative products

103 MODEL PROGRAMMING
CODES
Blocking all “Withheld” Callers
1. To Turn On: Get a dial tone and input * 7 # 7*#
2. To Turn Off : Get a dial tone and input * 6 # 7*#
You will hear a ‘beep’ to conrm success.
Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * 7 # * #
2. To Turn Off : Get a dial tone and input * 6 # * #
You will hear a ‘beep’ to conrm success.
Blocking all IP Dialing systems (skype / overseas nuisance call centers)
1. To Turn On: Get a dial tone and input * 7 # 6*#
2. To Turn Off : Get a dial tone and input * 6 # 6*#
You will hear a ‘beep’ to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * 7 # 0#
2. To Turn Off : Get a dial tone and input * 6 # 0#
You will hear a ‘beep’ to conrm success.
Blocking all “Withheld” Callers
1. To Turn On: Get a dial tone and input * 7 # 7*#
2. To Turn Off : Get a dial tone and input * 6 # 7*#
You will hear a ‘beep’ to conrm success.
Blocking all “International” Callers
1. To Turn On: Get a dial tone and input * 7 # * #
2. To Turn Off : Get a dial tone and input * 6 # * #
You will hear a ‘beep’ to conrm success.
Blocking all IP Dialing systems (skype / overseas nuisance call centers)
1. To Turn On: Get a dial tone and input * 7 # 6*#
2. To Turn Off : Get a dial tone and input * 6 # 6*#
You will hear a ‘beep’ to conrm success.
Blocking all “0” type calls (Single digit spoof callers)
1. To Turn On: Get a dial tone and input * 7 # 0#
2. To Turn Off : Get a dial tone and input * 6 # 0#
You will hear a ‘beep’ to conrm success.
5

Programming a number into "Blocking" list
1. Pick up the telephone and input * *7 # you will hear a "Beep”
2. Then enter the telephone number you wish to block, followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Enter the next number or hang up to complete setup.
Programming an area code into "Blocking" list
1. Pick up the telephone and input * * 7 # you will hear a "Beep”
2. Then enter the area code you wish to block, followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Enter the next area code or hang up to complete setup.
Erasing one number or area code from the "Blocking" list
1. Pick up the telephone and input * * 6 # you will hear a ‘Beep’
2. Then enter the telephone number you wish to delete followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Hang up to complete setup.
Programming a number into "Blocking" list
1. Pick up the telephone and input * *7 # you will hear a "Beep”
2. Then enter the telephone number you wish to block, followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Enter the next number or hang up to complete setup.
Programming an area code into "Blocking" list
1. Pick up the telephone and input * * 7 # you will hear a "Beep”
2. Then enter the area code you wish to block, followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Enter the next area code or hang up to complete setup.
Erasing one number or area code from the "Blocking" list
1. Pick up the telephone and input * * 6 # you will hear a ‘Beep’
2. Then enter the telephone number you wish to delete followed by the # key,
You will hear a ‘beep’ after each # to conrm success.
3. Hang up to complete setup.
104 /105 MODEL
PROGRAMMING CODES