
More Specs:
•Working Temperatures: 5-40 degrees Celsius
(41-104 degrees Fahrenheit)
•Humidity: <80%
•Power: 220V 50Hz
•Time setting: 0-120 min
Assembly:
•Take out of box
•Screw in wheels
•Plug the lamp bulb into the interface on the box
•Power on
•Control by the buttons or remote
Operating Instructions:
•Adjust the height of the bulb holder to get a suitable degree for
your space.
•Adjust the timer clockwise and set the disinfection time.
•Leave the room within the delay start time and do not enter
until disinfection is complete.
•The lamp will automatically shut off when the time has run
out.
Timer Options:
15 minute mode: areas up to 270 square feet
30 minute mode: areas up to 538 square feet
60 minute mode: areas 1076 square feet
If there is a defect with the cart please contact CPS LED for
information on replacement options.
This device is meant to be used as an adjunct to current cleaning practices, not replacing them.
The information and recommendations contained in this publication are based upon data
collected by CPS LED Lighting and are believed to be correct. However, no guarantee or
warranty of any kind, expressed or implied, is made with respect to the information
contained herein. Specifications and information are subject to change without notice.
Although every precaution has been taken in the preparation of this material, CPS LED
Lighting assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of the information contain herein.