CPVan CP-DS123 User manual

US smart Wi-Fi Wall Switch
User Manual
Alexa TUTORIAL Google Home TUTORIAL

Product feature
1. Work with Amazon Alexa/Google Home,commanded by your voice
2. Control your home with your smartphones app or tablets from anywhere at
anytime
3. Timing switch to tum ON/OFF your curtain appliances automatically
Specification
1. Input vltage:100-240VAC
2. Work frequency:50Hz/60Hz
3. Wireless frequency:WIFI 2.4GHz

Installation Guide
1. Prepare to install wiring
Attention: Neutral wire is required
1.1 L-IN wire connects “Live” electric wire
1.2 Bulb wire connects “Load, Load1” electric wire
1.3N-IN wire connects “Neutal” electric wire )
1.4 wire connects “Ground” electric wire )
1.5 1 gang connects “Load” electric wire
1.6 2 gangs connects “Load, Load1” electric wire

2. Fix the switch onto wall
2.1 Put the switch lower parts into switch box in the wall
2.2 Mount the up and down screws
2.3 Cover the upper top case into switch
2.4 Turn on electricity, and then LED light will be flashed quickly for pairing

Indicator light status:
1. The indicator light went out
-The switch is connected succeed with mobile phone APP
2. The indicator light blinking slowly
- The switch is not connected to the network
3. The indicator light flash continuously and quickly
- The switch is currently on the status of matching with mobile phone APP.
4. The indicator light flash 1 time every 3 seconds
-The switch is into AP pairing Mode
How to download App?
Scan the QR code below or search Smart Life in IOS APP store or Google play.
IOS & Android System

Setting Smart Life APP
How to Register and Login
1. Download or Scan the QR Code and install Smart Life App
2. Once download or Scan the QR Code, the App will ask you to register your
device
3. Enter your phone number or email which you prefer and select the country
you live in.
4. Obtain verification code
5. Enter verification code
6. Set Password

7. Create family
8. Enter the family name and select the room
9. Family create sucessfully

How to adding a new device in quick connection
1. Connect the switch with power
2. Press the power button on the switch 5-8 seconds until the indicator light
blinks quickly to reset the switch
3. Open App and tap “Add Device or +” and select “Wall switch” to add
4. Please make sure power on the device and indicator light rapidly blinks as 2
time per second

5. Select Wi-Fi network, input Wi-Fi password, and confirm that will prompt
connection
6. Once connected the app will prompt the connection

7. Rename the device and select the room then tap Completed
(Attention: The name should use numeric and letters, don’t use special
symbols.)

Adding a New Device in AP Mode
1. Connect the switch with power
2. Press any button on the switch (about 5-8 seconds) until the indicator light

blinks quickly to reset the switch
3. The second time press any button on the switch until indicator slowly blinks
(1 times in 3 seconds)
4. Press “+” in the main menu of APP and select “wall switch” to add

5. Tap” AP Mode “ and “Confirm indicator slowly blink”
6. Select Wi-Fi and input Wi-Fi password, press “Confirm”.

7. Press “ Go connect ”
8. Select “SmartLife-XXXX” and tap “CONNECT”

9.After connected “SmartLife-XXXX”,tap the “ ”