Cradlepoint MBR1200B User manual

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
`
Preface
CradlePoint reserves the right to revise this publication and to make changes in the content thereof without obligation to
notify any person or organization of any revisions or changes.
Manual Revisions
Revision
Date
Description
Author
1.0
May 22, 2012
Initial release for Firmware version 3.6.0
Jeremy Cramer
Trademarks
CradlePoint and the CradlePoint logo are registered trademarks of CradlePoint, Inc. in the United States and other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their
respective companies.
Copyright © 2012 by CradlePoint, Inc. All rights reserved. This publication may not be reproduced, in whole or in part,
without prior expressed written consent by CradlePoint, Inc.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
`
Table of Contents
1INTRODUCTION ................................................................ 3
1.1 PACKAGE CONTENTS ............................................................. 3
1.2 SYSTEM REQUIREMENTS......................................................... 3
1.3 MBR1200B OVERVIEW........................................................ 3
2HARDWARE OVERVIEW .................................................... 6
2.1 PORTS,BUTTONS,AND SWITCHES............................................ 7
2.2 LEDS.................................................................................. 9
3QUICK START .................................................................. 10
3.1 BASIC SETUP ...................................................................... 10
3.2 CONNECT TO A COMPUTER OR OTHER DEVICE .......................... 11
3.3 COMMON PROBLEMS .......................................................... 14
4WEB INTERFACE -- ESSENTIALS........................................ 17
4.1 ADMINISTRATOR LOGIN ....................................................... 18
4.2 GETTING STARTED –FIRST TIME SETUP................................... 20
4.3 QUICK LINKS ...................................................................... 25
4.4 CONFIGURATION PAGES ....................................................... 26
5STATUS........................................................................... 28
5.1 CLIENT LIST........................................................................ 29
5.2 DASHBOARD ...................................................................... 31
5.3 GPS................................................................................. 34
5.4 GRE TUNNELS ................................................................... 35
5.5 INTERNET CONNECTIONS ...................................................... 36
5.6 STATISTICS......................................................................... 47
5.7 SYSTEM LOGS..................................................................... 50
5.8 VPN TUNNELS ................................................................... 51
6NETWORK SETTINGS ....................................................... 52
6.1 CONTENT FILTERING............................................................ 53
6.2 DHCP SERVER ................................................................... 56
6.3 DNS ................................................................................ 57
6.4 FIREWALL .......................................................................... 60
6.5 MAC FILTER /LOGGING ...................................................... 66
6.6 ROUTING .......................................................................... 68
6.7 WIFI /LOCAL NETWORKS .................................................... 70
7INTERNET........................................................................ 86
7.1 CONNECTION MANAGER ...................................................... 87
7.2 DATA USAGE ................................................................... 103
7.3 GRE TUNNELS ................................................................. 108
7.4 VPN TUNNELS ................................................................. 113
7.5 WIFI AS WAN /BRIDGE.................................................... 124
8SYSTEM SETTINGS ......................................................... 129
8.1 ADMINISTRATION ............................................................. 130
8.2 DEVICE ALERTS................................................................. 139
8.3 MANAGED SERVICES ASK YOUR CRADLEPOINT SALES
REPRESENTATIVE FOR DETAILS............................................. 141
8.4 SYSTEM CONTROL............................................................. 144
8.5 SYSTEM SOFTWARE ........................................................... 145

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 2
9GLOSSARY..................................................................... 146
10 APPENDIX ................................................................... 160
10.1 REGULATORY INFORMATION ............................................. 160
10.2 WARRANTY INFORMATION ............................................... 160
10.3 SPECIFICATIONS .............................................................. 161

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 3
1 INTRODUCTION
1.1 Package Contents
CradlePoint Mission-Critical Broadband Router (MBR1200B)
AC power adapter (12V, 1.5A) WARNING: using a power adapter other than the one provided may damage the
MBR1200B and will void the warranty
Mounting Hardware
CAT5 Ethernet Cable
Setup Guide
1.2 System Requirements
At least one Internet source: an Ethernet-based modem, a broadband data modem with active subscription
(USB, ExpressCard), or WiFi as WAN.
Windows 2000/XP/7, Mac OS X, or Linux computer (with WiFi adapter—802.11n recommended—for WiFi
functionality).
Internet Explorer v6.0 or higher, Firefox v2.0 or higher, Safari v1.0 or higher.
1.3 MBR1200B Overview
The CradlePoint MBR1200B router enables easy-to-install wireless connectivity in small business or remote office
locations. Ideal for small businesses, temporary command centers, home offices, recreational vehicles, and mobile
networks; the CradlePoint MBR1200B provides wired Ethernet, and 3G/4G wireless WAN connectivity to keep you and
your business up and running.
ALWAYS CONNECTED
Use as primary connection to the Internet with wired or wireless broadband.
Ensure against loss of productivity and business opportunity with automatic failover to 3G/4G when the wired
connection is disrupted.
Load balance across the multiple wired and/or wireless connections when additional bandwidth is required.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 4
SECURE AND RELIABLE
LAN connections are protected with advanced WiFi encryption.
Main office access and business transactions are protected by VPN capability, and other security features to
ensure your network stays secure.
Designed for small office/home office deployments.
Engineered for day-in, day-out 24/7 Internet connectivity.
REMOTE MANAGEMENT, SERVICE, AND SUPPORT
WiPipeTM Central remote management web portal enables remote configuration, network-wide firmware updates
and a variety of reporting and alerting capabilities to inform on network status and prevent overage charges.
CradleCare Standard: covers hardware for first year, additional coverage can be purchased for subsequent years.
CradleCare Plus and CradleCare Premier: extended support and service agreements available for enterprise.
1.3.1 Features
Internet Access and Device Connectivity
Plug-and-play support for over 125 of the most advanced broadband data modems (LTE, WiMAX, HSPA+).
Security cap available to prevent device theft
5 Ethernet 10/100 LAN/WAN ports for Ethernet-enabled devices or landline Internet (up to 2 WAN, up to 5 LAN, 5
total)
Wireless LAN - WiFi (802.11 b/g/n) supports up to 64 connections at a time
Business Continuity: Failover/Failback
Automatic failover to wireless WAN connection when wired WAN disruption occurs, automatic failback when wired
WAN connection is restored
Load balancing across multiple wired and wireless WANs for more bandwidth
Proactive alerts when failover occurs through WiPipe Central™

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 5
Flexibility
Remote management with WiPipe™ Central and SNMP v1,2,3
Two SSIDs, with individual security, separate critical traffic
―WiFi-as-WAN‖ mode enables use as a WiFi repeater, WiFi bridge or as a WiFi-to-Ethernet adapter for Ethernet-
enabled devices
Two Ethernet ports can be configured to ―WAN Mode‖ to provide wireless and wired failover and load balancing
Data usage management and alerts to monitor data usage and avoid overages
Security
IPsec VPN (2 concurrent sessions) with GRE tunneling option, also supports pass-through VPN connections
(IPsec, L2TP, PPTP)
WEP, WPA, WPA2, WPA2 Enterprise and AES encryption for secure WiFi
Stateful packet inspection firewall and NAT (network address translation) to prevent unwanted access to connected
computers
Variety of security features (URL filtering, traffic filtering, DMZ, virtual server, port forwarding) for safer internet
access
Service, Support and Warranty
Limited 1 year warranty included featuring 5x12 technical support, and access to software updates and hardware
repair or replacement
CradleCare Plus and CradleCare Premier optional enterprise support agreements available with 24/7 technical
support, software updates and upgrades and advanced hardware exchange

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 6
2 HARDWAREOVERVIEW

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 7
2.1 Ports, Buttons, and Switches

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 8
LAN and WAN Ports: By default, the four yellow ports are configured as LAN (Local Area Network) ports and the blue
port is configured as a WAN (Wide Area Network—your Internet source) port. Any LAN port, however, can be
reconfigured as a WAN port and vice versa.
Modem Ports: The MBR1200B has two USB 2.0 ports and one ExpressCard port.
Factory Default Reset: You can return your router to factory default settings by pressing and holding the Reset button.
This button is recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to
initiate reset.
WPS Button: WiFi Protected Setup. When you press the WPS button for five seconds, it allows you to use WPS for WiFi
security. The LED will illuminate blue to indicate WPS status. Devices must support WPS in order to be configured by this
method.
Power On/Off:
1 = On
0 = Off
WiFi Broadcast On/Off: You have the option to turn off the WiFi radio.
1 = On
0 = Off
3G/4G Modem Signal Strength Button: When pressed the bar LEDs indicate signal strength from the USB or
ExpressCard modem. The signal strength is shown for 10 seconds if the modem does not support concurrent data
connection and signal strength measurement. Tapping this button will toggle the Modem Signal Strength display on and
off.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 9
2.2 LEDs
LAN and WAN LEDs: The default settings are shown. LAN ports can be reconfigured to function as WAN ports and vice
versa; the LEDs will function accordingly.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 10
3 QUICKSTART
3.1 Basic Setup
Your router requires an Internet source. Insert supported
USB or ExpressCard modem/s, connect a Cable or DSL
modem to the Blue Ethernet WAN port, or connect to an
available WiFi source. For Failover/Failback functionality,
you will need at least two of these sources (for example: one
Ethernet source and one USB modem).1
Connect the 12v DC power adapter to the router and a
power source. Flip the power switch to the ON position; this
should illuminate the green Power Status LED.
1Data Modem Not Included. This Product Requires an Activated Data Modem or Phone with Data Plan for Full Functionality. See your Cellular/3G/4G Service Provider for Details
on Coverage and Data Plan Options

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 11
3.2 Connect to a Computer or other Device
3.2.1 Wireless Network Connection
1) Find the network. On a WiFi-enabled computer or
device, open the window or dropdown menu that allows
you to access wireless networks. The MBR1200B
network will appear on the list: select this network.
2) Log in. You will need to input the Default Password
when prompted. The Default Password is provided on
the product label found on the bottom of your router
(this password is the last eight digits of the router‘s
MAC address, which can be found on the product box
or on the product label).
NOTE: If more than one MBR1200B wireless router is visible, you
can find the correct unit by checking for its SSID (service set identifier; the unique name
of the local network). The SSID can be found on the bottom of the router in the form
MBR1200B-xxx, where ―xxx‖ is the last 3 digits of the router‘s MAC address.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 12
3.2.2 Accessing the Administration Pages
For most users, the MBR1200B Router can be used immediately without any special configuration changes. If you would
like to change your network name or password or configure any of the advanced features of the MBR1200B, you will need
to log in to the administration pages:
Access your router‘s Administrator
Login screen by opening a web
browser window and typing ―cp/‖(your
router‘s default hostname) or the IP
address ―192.168.0.1‖into the
address bar.
Enter your Default Password. This
password can be found on the bottom
of the MBR1200B. Then click the
LOGIN button.
When you log in for the first time, you
will be automatically directed to the
First Time Setup Wizard. Follow the
instructions given with the Wizard or
see Getting Started –First Time
Setup for more information about
using the First Time Setup Wizard.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 13
3.2.3 Connect to the Internet
If you used the First Time Setup Wizard, you might have
changed the ―WiFi Network Name‖ or the ―Security Mode‖
password. If so, you will need to reconnect to the MBR1200B
network.
Find the network. Look for your new personalized
network name (or the default SSID of the form
―MBR1200B-xxx‖).
Log in using your new personalized WiFi security
password (or the Default Password found the bottom of
the router).
Your network should now be up and running, and users who
have the security password can access the network on WiFi-enabled devices.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 14
3.3 Common Problems
This section contains a list of some of the most common issues faced by users of the MBR1200B.
Please visit CradlePoint Knowledgebase at http://knowledgebase.cradlepoint.com/ for more help and answers to your
other questions.
3.3.1 Your USB or ExpressCard Modem Does Not Work With the Router
If your USB data or ExpressCard is not working with the router, check the list of supported devices at
http://www.cradlepoint.com/modems to ensure you are using a supported device and carrier. The device you are
using must be supported on the carrier network providing your cellular service or it‘s considered an unsupported
device, even if it is supported on another carrier‘s network.
Sometimes a USB data modem needs to be updated or have other configurations set correctly in order to make a
connection through the router. If your USB Modem has not been updated recently, it is recommended that you do
so if it is having trouble connecting to the MBR1200B. Insert your USB data modem into your PC and access the
Internet using the software provided by your cellular carrier. Follow the directions provided to complete the update.
Once you have updated your USB data modem, reconnect the cellular device to your CradlePoint router and
connect to the Internet.
If you are using a 4G WiMAX modem you need to set the WiMAX Realm. This can be done on the administration
pages. Log in using the hostname ―cp/‖or IP address ―http://192.168.0.1‖in your browser. On page 3 of the First
Time Setup Wizard (go to Getting Started → First Time Setup), you can set the WiMAX Realm. Be sure to click
Apply on the final page to save the change.
Some wireless carriers provide more than one Access Point Name (APN) that a modem can connect to. If you wish
to specify the APN, this can be done on the administration pages. Log in using the hostname ―cp/‖or IP address
―http://192.168.0.1‖in your browser. Go to Internet → Modem Settings. In the Modem Configuration section,
select your modem and click ―Configure.‖ There is an Access Point Name field: Enter the APN and click Apply.
Some APN examples are isp.cingular, ecp.tmobile.com, and vpn.com. The modem must be removed and
reinserted (or the router must be rebooted) for this change to take effect.
If the above issues have been resolved and you can connect to the router but you cannot get Internet through it
using your modem, you may need to upgrade the router firmware. Use your computer (you may need to plug your
modem directly into your computer if you don‘t have another way to access the Internet) to download the latest

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 15
firmware for the router (go to http://www.cradlepoint.com/firmware/MBR1200B). Then log in to the router
administration pages and manually upload the firmware. Go to System Settings → System Software and click on
―Manual Firmware Upload‖.

If you are still unable to access the Internet after following the above directions, contact CradlePoint Technical Support for
further assistance.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 16
3.3.2 You are Connected to the Router but Cannot Connect to the Internet
The status LEDs of your router will give you an indication whether or not a proper connection is being made. See the LED
STATUS definitions below:
If the data modem LEDs are not illuminated, your modem is not connected and online. You may need to update firmware.
Refer to the previous section, ―Your USB or ExpressCard Modem Does Not Work With The Router.‖
-
If you are still not online after updating, call CradlePoint Technical Support for further assistance.

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 17
4 WEBINTERFACE-- ESSENTIALS
The MBR1200B has a Web interface for configuration and administration of all features. The interface is organized with 5
tabs at the top of the screen:
Getting Started
Status
Network Settings
Internet
System Settings
Web Interface –Essentials contains the following sections to help you more quickly and easy navigate these
administration pages:
4.1 Administrator Login
4.2 Getting Started –First Time Setup
4.3 Quick Links
4.4 Configuration Pages

CRADLEPOINT MBR1200B| USER MANUAL Firmware ver. 3.6.0
© 2012CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 18
4.1 Administrator Login
To access the administration pages, open a Web browser and type the hostname ―cp/‖ or IP address ―http://192.168.0.1‖
into the address bar. The Administrator Login page will appear.
Log in using your administrator password. Initially, this password can be found on the bottom of the MBR1200B unit as
the Default Password. This password is also the last eight digits of the unit‘s MAC address.