
1.2 inches
tall
CradlePoint and WiPipe are trademarks of CradlePoint, Inc.
All other product or service names are the property of their respective owners. 02/09
* USB and ExpressCard modems require activation with a mobile broadband carrier.
Ask your service provider for details concerning coverage, 3G/4G availability, rates and
service plans. CradlePoint supports over 85 modems and handsets. For the latest
compatibility list, visit www.cradlepoint.com.
** Based on cellular/mobile broadband coverage.
WPS/SGNL
buttons
USB modem
port
Adjustable antennas
ExpressCard
modem port
LED indicators
7.0 inches
4.8 inches
MBR1100
Failsafe Broadband NRouter
SPECIFICATIONS
Model #: MBR1100
Wi-Fi Standards: IEEE 802.11b/g/n
Network Connections: 4 LAN, 1 WLAN (Ethernet), 2 USB modem ports, 1
ExpressCard modem port
Buttons/Switches: Wi-Fi On/Off switch; WPS button (security), SGNL button
(signal strength display mode), and Reset button
LED Indicators: Power, LAN 1-4, WAN (wired network), WPS (Wi-Fi
protected setup), WLAN (cellular network), MDM (modem), SGNL (signal
strength mode)
Dimensions: 7” x 4.8” x 1.2” (180 mm x 122 mm x 30.25 mm)
Certifications: FCC
Operating Temperature: 0°C to 50°C
IN THE BOX
•MBR1100 •AC Power Adapter
•CAT5 Ethernet Cable •Mounting Hardware
•Quick Start Guide
•Warranty Card
MINIMUM REQUIREMENTS
•Mobile broadband USB or ExpressCard data modem with
active subscription or supported phone with active tethered
(phone-as-modem) data plan
•Windows 2000/XP/Vista, Mac OS X, or Linux with Wi-Fi adapter
802.11 b/g/n recommended
•Internet Explorer v6.0, Firefox v2.0, or Safari v1.0 minimum
TECHNOLOGY
1199 Shoreline Lane, Suite 301 | Boise, Idaho 83702 | 208 424 5054 | www.cradlepoint.com
DETAILS
•2.412 to 2.484 GHz frequency band operation
•Compliant with IEEE 802.3 and 3u standards
•Supports OFDM and CCK modulation
•Supports Cable/DSL modems with dynamic IP, static IP, PPPoE, PPTP, or
L2tp connection types
•Traffic control and Virtual Server (max 32 servers) and DMZ
•Compatible with HSPA and EVDO cellular network devices
•Easy Management via HTTP and Remote Management via HTTP and SNMP
VPN DETAILS
•Up to five VPN sessions
•Web GUI control configured via administrator policies
•Supported VPN implementations
•MBR1100 to MBR1100 •MBR1100 to Cisco/Linksys routers1
•MBR1100 to Linux systems2
•Tunnel (default) and Transfer (aka, Transport) modes
•Hash algorithms (hardware accelerated) – MD5, SHA128, SHA256,
SHA384, SHA512
•Cipher Algorithms (hardware accelerated) – AES, 3DES, DES
•Keying – automatic using IKE 1.0 or manual
•Authentication Method – pre-shared key3
•No stream compression, LT2TP or PPTP support
SECURITY
•Firewall features Network Address Translation (NAT), and Stateful Packet
Inspection (SPI) protects against DoS attacks
•Access Control available in encrypted and open modes, and
password-protected Internet access to prevent unauthorized usage
•Provides additional security of Enable/Disable SSID, Internet Access
Control (Services, URL, and MAC Filtering)
•Supports multiple concurrent IPSec, L2TP, and PPTP VPN pass-through
sessions
•Supports 64/128-bit WEP, WPA, WPA2 (Personal and Enterprise) wireless
security modes
1 Tested against a Cisco 5500 running IKE microcode: CNlite-MC-IPSEC-Admin-3.03 IPSec
microcode: CNlite-MC- IPSECm-MAIN-2.03
2 Tested with Linux Kernel: 2.6.18 - 2.6.25; IKE (Racoon): 0.7.0 and 0.7.1
3 No stream compression, LT2TP or PPTP support
Wi-Fi on/off
4-LAN ports
WAN port
USB
Reset
AC adapter
Back panel ports