Cradlepoint AER1600 Series User manual

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 1/6
AER1600 Series Micro Branch Router Quick Start Guide
Sep 16, 2020 •Knowledge
ROUTING
(/S/TOPIC/0TO38000000Q3MCGA…
Content
AER1600 Series Micro Branch Router Quick Start Guide
Introduction
This document provides a brief overview of the AER1600 Series Micro Branch Router, discusses what's inside the box, and provides basic setup and
installation instructions for the device.
Navigation
Use the following links to quickly navigate through this document.
AER1600 Series Models
Before You Begin
Location Considerations
WiFi Capability
SIM Setup for Connectivity
Installing an External (Modular) Modem
Required Tools
Setup
STEP 1: Check box contents.
STEP 2: Insert an activated SIM.
STEP 3 (Optional): Insert a modular MC400 modem.
STEP 4: Attach the antennas.
STEP 5: Connect the power source.
STEP 6: Connect to NetCloud.
Understanding LEDs
Troubleshooting
Resources
Help and Support
Terms of Service
AER1600 Series Models
This document applies to the following AER1600 Series models.
Caption
Search (Knowledge Base, Forums, Cases)
Search
Log in
Home (/s/) TECHNICAL SUPPORT (/s/contactsupport) FORUMS (/s/forums) TRAINING (/s/cpu) NETCLOUD (/s/NetCloud)

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 2/6
CRADLEPOINT AER1600 S4A542A
CRADLEPOINT AER1650 S4A547A
CRADLEPOINT AER1600LPE S4A547A
CRADLEPOINT AER1650LPE S4A548A
CRADLEPOINT AER1600LP4 S4A637A
CRADLEPOINT AER1650LP4 S4A642A
Before You Begin
Read the following before setting up and installing the AER1600 Series router.
NOTE: Cradlepoint recommends that all branch endpoints be installed by a professional. For assistance with installation or in locating a professional installer,
contact Cradlepoint Sales and Support (https://cradlepoint.com/support/).
Location Considerations
To ensure the AER1600 operates efficiently, do the following:
Ensure the device is positioned to receive optimal signal. Avoid positioning near concrete walls, metal or reflective surfaces, or any other objects that may
interfere with RF reception.
Ensure plenty of ventilation. Avoid installing the device in enclosed spaces.
Do not install the device in direct exposure to the elements. Extreme heat or cold can and will impact the router's performance.
Refer to the AER1600 Series Safety, Regulatory, and Warranty Guide (included with your hardware) for more information about location considerations.
Wi-Fi Capability
The AER1650, AER1650LPE, and the AER1650LP4 do not support Wi-Fi.
SIM Setup for Connectivity
For enhanced function of the AER1600 Series Micro-Branch Router, you will need at least one activated 2FF-sized SIM card with active cellular data plan.
SIMs with wireless broadband data plans are available from wireless carriers such as AT&T, Verizon, and T-Mobile. The SIM must be provisioned by the
carrier. Contact your carrier for detail about selecting a data plan and about the process for provisioning your SIM.
Installing an Optional External (Modular) Modem
The AER1600 includes a slot for an additional MC400 modem. This enhanced capability allows for redundancy, advanced configuration, failover, and
upgradability. The AER1600 supports both the MC400-600M or the MC400-1200M. Refer to the following for more information:
MC400 Webpage (https://cradlepoint.com/product/accessories/mc400-modular-modem/)
MC400 Spec Sheet (https://cradlepoint.com/sites/default/files/upload-file/mc400-spec-sheet-005172019.pdf)
MC400 Quick Start Guide (https://customer.cradlepoint.com/s/article/MC400-Getting-Started)
Required Tools
#1 Philips head screwdriver
Return to Top
Setup

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 3/6
Read through the following to set up your AER1600 Series Micro Branch Router.
STEP 1: Check box contents.
The AER1600 Series router includes the following:
An AER1600 Series Router
An MC400 LTE Modem*
A 12V 3A AC/DC Power Adapter
Modem Antennas (quantities vary by model)
An Ethernet Cable
A Safety, Regulatory, and Warranty Guide
*Included with AER1600LP3 and AER1650LP3. Optional for AER1600, AER1650, AER1600LPE, and AER1650LPE.
STEP 2: Insert an activated SIM.
If setting up cellular connectivity, do the following:
1. Turn the router over and remove the screw to the SIM door.
2. Lift the SIM 1 card slot and insert an activated 2FF-sized SIM card. Insert the card with the metal contacts facing the interior of the device when closed
and notch end up. Refer to the image above.
3. Insert a second activated SIM card into the SIM 2 card slot, if desired.
4. Flip the SIM slot(s) down then close and secure the SIM door with the screw.
STEP 3 (Optional): Insert a modular MC400 modem.
The AER1600 Series has a slot for a removable modular MC400. If using the optional additional MC400 modem, it must be installed before the AER1600
Series router can be set up. To install this modem, do the following:
1. Insert an activated 2FF-sized SIM card into the MC400 modem, metal contacts down, notch end first.
2. Remove the modem door on the AER1600 Series device.
3. Slide the MC400 modem into the available modem into the available modem slot, USB plug first, with the Cradlepoint logo facing up.
4. Replace the MC400 modem door cover. NOTE: Remove the plastic SMA covers from the modem door cover fo the additional antenna ports on the
modem.
5. Secure the door cover screw (beneath the device). NOTE: The modem door cover must be on the router or the embedded modem will not power on.
STEP 4: Attach the antennas.
Attach the included Wi-Fi antennas to the connectors.
1. Hold the antenna straight and twist the base onto the SMA port on the device.
Do not over-tighten. The maximum recommended torque is 4 in-lbs.
2. Bend each antenna at the joint for optimal signal reception.

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 4/6
STEP 5: Connect the power source.
1. Connect the power supply to the router and then plug the other end into an electrical outlet.
2. Switch the device to ON (O = Off, – = ON). The LED lights will begin lighting up.
STEP 6: Connect to NetCloud.
Once the AER1600 is powered on, log into your NetCloud account to activate the router. Your device is packaged with NetCloud services and requires that
you log into your NetCloud account to activate your device. Refer to Getting Started with NetCloud (https://customer.cradlepoint.com/s/article/Getting-Started-
with-NetCloud-Manager) for more information.
Understanding LEDs
Refer to the following table for information about LED indicators.
INDICATOR BEHAVIOR
Power: The AER1600 series device must be powered using an approved 12V AC power
source.
No Light = Not receiving power. Check the power switch and the power source
connection.
Green = Powered on
Amber = Attention. Open the administration pages and check the router status. The LED
will show amber until the default Administrator and WiFi passwords are changed. Default
passwords must be changed to secure the router.
WAN
Ethernet WAN: indicates information about a data source connected to the Ethernet WAN
port.
Blue = Connected to an ethernet WAN interface
VPN
VPN: Indicates information about a VPN data source.
Green = Active VPN tunnel
Embedded Modem: indicates the status of embedded modem (only on
AER1600LPE/AER1650LPE)
Green = Modem has established an active connection.
Blinking Green = Modem is connecting.
Blinking Amber = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
Removable MC400 Modem: Indicates the status of the removable MC400 modem.
No light = No modem detected.
Blue = MC400 has an active connection.
External USB Modem: Indicates the status of removable modem(s).
No light = No modem detected.
Blue = USB modem has an active connection.

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 5/6
Related Articles
Quick Start Guide Index (/s/article/Quick Start Guides) 1 54K
INDICATOR BEHAVIOR
Signal Strength: Blue LED bars indicate the active modem's signal strength for integrated
and removable modems.
4 Solid bars = Strongest signal
1 Blinking bar = Weakest signal. (A blinking bar indicates half of a bar)
WiFi Broadcast: Indicates activity on the WiFi broadcast for both the 2.4 GHz and 5 GHz
bands (AER1600 only).
2.4 GHz (green) = 2.4 GHz WiFi is on and operating normally.
5 GHz (blue) = 5 GHz WiFi is on and operating normally.
Return to Top
Troubleshooting
If the router takes longer than 5 minutes to connect to the Internet, you may need to log into the local UI of the device to make configuration changes or to
start the troubleshooting process. You must be physically co-located with the device in order to do this. Once the router connects to the Internet, it should
then connect to your NetCloud account and start its configuration download. Refer to No Internet or Connection Issues
(https://customer.cradlepoint.com/s/article/No-Internet-or-Connection-Issues) for more troubleshooting information.
Resources
AER1600 Series Webpage (https://cradlepoint.com/product/endpoints/aer1600/)
AER1600 Spec Sheet (https://resources.cradlepoint.com/product-docs/spec-sheet-aer1600)
Help and Support
Cradlepoint Customer Connect Community (https://customer.cradlepoint.com/s/)
Cradlepoint Support Services (https://cradlepoint.com/support/)
Terms of Service
Cradlepoint Terms of Service (https://cradlepoint.com/about-us/terms-of-service/)
Cradlepoint Privacy Policy (https://cradlepoint.com/privacy-policy/)
Return to Top
Title
AER1600 Series Micro Branch Router Quick Start Guide
URL Name
AER1600-Series-Micro-Branch-Networking-Router
Routing
(/s/topic/0TO38000000Q3MCGA0/r…
No related lists to display
Follow
Ask a Question

11/2/2020 AER1600 Series Micro Branch Router Quick Start Guide
https://customer.cradlepoint.com/s/article/AER1600-Series-Micro-Branch-Networking-Router 6/6
Quick Start Guide Index (/s/article/Quick-Start-Guides) 1.54K
E300 Series Enterprise Branch Router Quick Start Guide (/s/article/E300-Series-Enterprise-Branch-Router-Quick-Start-Guide) 2.65K
E3000 Series Enterprise Branch Router Quick Start Guide (/s/article/E3000-Series-Enterprise-Branch-Router-Quick-Start-Guide) 1.85K
AER2200 Branch Router Quick Start Guide (/s/article/AER2200-Getting-Started) 19.85K
COR IBR200 IoT Router Quick Start Guide (/s/article/COR-IBR200) 4.66K
Trending Articles
Accessing the Setup Pages of a Cradlepoint Endpoint
(/s/article/NCOS-Accessing-the-Setup-Pages-of-a-CradlePoint-router)
How to Do Port Forwarding To Multiple Devices on the Same Port
(/s/article/How-to-Do-Port-Forwarding-To-Multiple-Devices-on-the-Same-Port)
IBR600C Series Quick Start Guide
(/s/article/COR-IBR600C-Series-Quick-Start-Guide)
Getting Started with NetCloud Manager
(/s/article/Getting-Started-with-NetCloud-Manager)
How To Set Custom DNS Servers Over a Routed OpenVPN Tunnel
(/s/article/How-To-Set-Custom-DNS-Servers-Over-a-Routed-OpenVPN-Tunnel)