Craft+Main TIDES NEO-ANGLE User manual

COPY THE MODEL NUMBER FOR YOUR RECORDS HERE #
NEO-ANGLE
SHOWER DOOR
6241 Northwind Parkway, Hobart, IN USA 46342
www.ForemostBath.com
Toll Free Customer Assistance 1-888-620-3667 US Customers
1-888-256-7551 Canada Customers
Monday-Friday, 7:30 a.m. To 5:00 p.m. CST
5970 Chedworth Way, Unit B, Mississauga, Ontario, Canada L5R 4G5
www.ForemostCanada.com
READ THE INSTRUCTIONS CAREFULLY
Familiarize yourself with all the parts as shown in the exploded
view. The exploded view will also provide a helpful reference
when relating to the location of the various parts and how
they are mounted.
Please visit us on YouTube and view our shower door installation videos.
One may be available for your installation. www.youtube.com/c/CRAFTANDMAIN
TIDES
by
TM
© 2022 FGI Industries, Ltd. | CRAFT + MAIN™ and logo design are trademarks of FGI Industries, Ltd.

- 1 -
15 16 17 18

SILICONEDRILLTAPE MEASURE RUBBER MALLETDRILL BIT
LEVELPENCILSCREW DRIVERSSAFETY GLASSES
PARTS LIST
RECOMMENDED TOOLS
- 2 -
67 8 9
WARNING: Safety glasses should always be worn when working with tempered glass.
UTILITY KNIFE
10
KNIFE
CUTTING NIPPERS

- 3 -
CHOOSE WHETHER YOU ARE INSTALLING LEFT OR RIGHT SHOWER DOOR
Determine which assembly configuration you need to follow based on the location of the shower
head as viewed from the outside of the shower.
INSTALLATION PROCEDURE / STEP 1

INSTALLATION PROCEDURE / STEP 2
2
- 4 -
Insert Angle Bracket(12) into top frame of the Side Panel(8) attached to the top Door Frame(11) using Screw(13).

INSTALLATION PROCEDURE / STEP 3
- 5 -
(#14)

Wall jamb should be at here
16
15
INSTALLATION PROCEDURE / STEP 4
- 6 -
FOR ACRYLIC & FIBERGLASS SHOWER ENCLOSURES
Using a 1/8 inch drillbit, drill a hole about 1-1/2 inch deep at each
of the previously marked locations.
FOR TILED SHOWER ENCLOSURES
Using a 1/4 inch masonry drill bit, drill a hole about
1-1/2 inch deep at each of the previously marked locations.
Inser t wall plugs into each of the drilled holes.
WARNING: Do not use wall anchors with berglass of acrylic
shower enclosures.
1/4”
16
38mm (#15)
(#1)

INSTALLATION PROCEDURE / STEP 5
- 7 -

INSTALLATION PROCEDURE / STEP 6
- 8 -

INTERIOR
SHOWER SI DE
INSTALLATION PROCEDURE / STEP 7 / STEP 8
- 9 -

Thank you for your purchase of a shower door
from FGI Industries, Ltd.
In order to be eligible for product warranty, please register
your door on our website within two (2) weeks of installation.
Go to:
https://craftandmain.com/warranty/
and follow the instructions.
For any questions or comments
about your new shower door,
please contact our Customer Service at:
ATTENTION
CONSUMER:
IMPORTANT SHOWER ENCLOSURE
WARRANTY INFORMATION
PLEASE DO NOT DISCARD
© 2022 FGI Industries, Ltd. | CRAFT + MAIN™ and logo design are trademarks of FGI Industries, Ltd.
USA: www.craftandmain.com | CANADA: www.craftandmain.ca
6241 Northwind Parkway
Hobart, IN USA 46342
US CUSTOMERS:
1-888-620-3667
[email protected]
CANADA CUSTOMERS:
1-888-256-7551
[email protected]
5970 Chedworth Way, Unit B
Mississauga, Ontario, Canada L5R 4G5