Craftsman 580.752211 User manual

Operator'sIVlanual
Fr MRN °
iViodelNo. 580.752211
HOURS: IVlon.- Fri. 8 a.m. to 5p.m. (CT)
WARNING
Before using this product, read this
manual and follow aii Safety Rules
and Operating Instructions.
ADVERTENCiA
Antes de utiiizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
,, Safety
,, AssernhJy
,, Operation
,, Maintenance
,, Parts
,, EspafioJ,p. 32
This pressure washer is rated in accordanceto the PressureWasher Manufacture Association (PWMA) standard PW101 (Testingand Rating
Performance of PressureWashers).
Esta limpiadora a presi6n est,. clasificadaconforme a la norma PW101 (comprobaci6n y clasificaci6n de rendimiento de fimpiadorasa
presi6n) de la Asociaci6n de fabricantes de bombasa presi6n (Pressure Washer ManufactureAssociation, PWMA).
Sears, Roebuckand Co., HoffrnanEstates,IL 60179 U.S.A.
Visit our Craftsman website: www.craftsman.com
Part No. 206339GS Draft A (08/26/2008) 03

WARRANTY .......................................... 2
SAFETYRULES...................................... 2-5
FEATURESAND CONTROLS.............................. 6
ASSEMBLY........................................ 7-10
OPERATION....................................... 11-15
SPECIFICATIONS..................................... 16
MAINTENANCE.................................... 17-21
STORAGE........................................... 22
TROUBLESHOOTING.................................. 23
REPLACEMENTPARTS.............................. 24-29
EMISSIONCONTROLWARRANTY..................... 30-31
ESPANOL......................................... 32-55
HOWTO ORDERPARTS........................ BACKPAGE
ONE-YEARFULLWARRAHTYOHCRAFTSiViAHPRESSUREWASHER
If this pressurewasher fails due to a defect in material or workmanship within one yearfrom the date of purchase,return it to
any Searsstore, other Craftsmanoutlet, or SearsParts & RepairCenterin the UnitedStatesor Canadafor free repair (or
replacementif repair proves impossible).
All warranty coverageapplies for only 90 days from date of purchaseif this pressure washer is everused for commercial or
rental purposes.
This warranty givesyou specific legal rights, and you may also haveother rights which vary from stateto state.
Sears, Roebuck and Co., Hoffmafl Estates, IL 60179
Sears Canada Iflc., Toronto, Ontario, Canada MSB 2B8
Readthis manual carefully and become famiJiar A Thesafety alertsymbol indicatesa potential personal
with yourpressurewasher. KnowitsappJicatious,
itslimitations, and any hazardsinvolved.
importantSafetyinformation
Safety SymhoJsand Meanings
ToxicFumes HazardousChemical ElectricalShock
SlipperySurface Fall FluidInjection
Fire Explosion Operator'sManual
MovingParts FlyingObjects Kickback HotSurface
injury hazard.A signalword (DANGER,WARNING,or
CAUTION)is usedwith thealert symbol to designatea degree
or levelof hazardseriousness.A safety symbol may be used
to representthetype of hazard.Thesignal word NOTICEis
usedto addresspractices not relatedto personalinjury.
_i_BANGERindicatesa hazardwhich, if not avoided, will
result in deathor serious injury.
_i_WARNINGindicatesa hazardwhich, if not avoided, could
result in deathor serious injury.
_i_CAUTIONindicates a hazardwhich, if not avoided, could
result in minor or moderate injury.
NOT/CEaddress praticesnot relatedto personalinjury.
© SearsBrands, LLC

Ai_DANGER: Contents are harmful or fatal if swallowed.
Avoid contact to eyes, skin or clothing.DO NOT take internally. Avoid breathing
the mist or vapor. Overexposure to eyes
or skin can cause irritation. Keep stabilizer out of the
reach of children.
Fuel stabilizer is a hazardous chemical.**
• FreshStart® fuel cap is designedto hold a cartridge which
contains fuel stabilizer.
• If SWALLOWED,call physician immediately. DONOTinduce
vomiting. If inhaled, removeto fresh air. in case of eye or skin
contact, flush with water for 15 minutes.
• Store unopenedcartridges in acool, dry, well ventilated area.
Keepopen cartridge in fuel cap, and fuel cap closed on fuel
tank when not in use.
• In the caseof an emergency, contact a physician immediately
and call 1-800-424-9300 for materialsafety information.
• *Fuel stabilizer contains: 2,6-di-tret-butylphenol (128-39-2) and aliphatic
petroleum distillate (64742-47-8).
_, WARNING:The engine exhaustfrom this product
contains chemicals known to the State of Californiato
causecancer, birth defects,or other reproductive harm.
_, WARNING: Certaincomponents in this product and
relatedaccessoriescontain chemicals known to the State
of Californiato causecancer, birth defects or other
reproductive harm. Wash hands after handling.
Ai_WARNING: Running enginegives off carbon
monoxide, an odorless, colorless, poison gas.
_ Breathingcarbon monoxide headache,
cancause
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
Somechemicals or detergentsmay be harmful if inhaled
or ingested, causing severenausea,fainting, or
poisoning.
• OperatepressurewasherONLYoutdoors.
• Keepexhaustgasfromenteringa confinedareathrough
windows,doors,ventilationintakes,or otheropenings.
• DONOTstartor runengineindoorsor in anenclosedarea,
evenifwindowsanddoorsareopen.
• Usea respiratoror maskwheneverthereisa chancethat
vaporsmaybeinhaled.
• Readall instructionswith masksoyouarecertainthemaskwill
providethenecessaryprotectionagainstinhalingharmful
vapors.
Ai_WARNING: Fuel and its vapors are extremely
flammable and explosive.
Fire or explosion can cause severe burns
or death.
WHENADDING OR DRAININGFUEL
• Turn pressurewasher OFFand let it cool at least 2 minutes
before removing fuel cap. Loosen capslowly to relievepressure
in tank.
• Fill or drain fuel tank outdoors.
• DONOToverfill tank. Allow spacefor fuel expansion.
• Iffuel spills, wait until it evaporatesbefore starting engine.
• Keepfuel awayfrom sparks, open flames, pilot lights, heat,and
other ignition sources.
• DONOTlight a cigaretteor smoke.
WHENSTARTINGEQUIPMENT
•Ensurespark plug, muffler,fuel cap,andair cleanerarein place.
•DO NOTcrank enginewith spark plug removed.
WHENOPERATINGEQUIPMENT
•DONOTtip engine or equipment at anglewhich causes fuel to
spill.
•DONOTsprayflammable liquids.
WHENTRANSPORTINGOR REPAiRiNGEQUIPMENT
•Transport/repair with fuel tank EMPTYor with fuel shutoff valve
OFF.
•Disconnectspark plug wire.
WHENSTORINGFUELOR EQUIPMENTWITH FUELiN TANK
•Store awayfrom furnaces, stoves, water heaters,clothes
dryers, or other appliancesthat have pilot lightor other ignition
source becausethey can ignitefuel vapors.
A, WARNING:Riskof electrocution.
'_,dh Contactwith power source can causeelectric
shock or burn.
*NEVERspraynearpowersource.

AkWARNING: Starter cord kickback(rapid retraction) can
result in bodily injury. Kickbackwill puii hand and
arm toward enginefaster thanyou can let go.
Broken bones,fractures, bruises, or sprains
could result.
* NEVERpullstarter cord without first relieving spraygun
pressure.
*When starting engine, pull cord slowly until resistance isfelt
andthen pull rapidly to avoid kickback.
*After each starting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button andsqueeze
spray gun trigger to releasehigh pressure.
* Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spraygun kicks back.
Ak WARNING: Use of pressure washer can create puddles
,,l_ _, and slippery surfacesKickback from spray gun can cause you
to fall.
•Operatepressurewasher from a stablesurface.
•Thecleaning areashould have adequateslopes and drainageto
reducethe possibility of a fall due to slippery surfaces.
•Beextremely careful if you must usethe pressurewasher from
a ladder, scaffolding, or any other similar location.
• Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spraygun kicks back.
A, WARNING: Contact with muffler area can result in
serious burns.
,_ _ Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
* DO NOTtouch hot parts and AVOID hot exhaust gases.
* Allow equipmentto cool beforetouching.
*Keepat least5 feet (152 cm) of clearanceon all sidesof
pressure washer including overhead.
*It is a violation of California Public Resource Code,Section
4442, to use or operate the engineon anyforest-covered,
brush-covered, or grass-covered land unlessthe exhaust
system is equipped with a spark attester, as defined in Section
4442, maintained in effective working order. Other states or
federal jurisdictions may have similar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a sparkattester designedfor the exhaust system
installed on this engine.
*Replacement parts must bethe sameand installed in the same
position asthe original parts.
A, WARNING: The high pressure stream of water that this
equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
*DONOTallow CHILDRENto operatepressure washer.
* NEVERrepair high pressure hose.Replaceit.
* NEVERrepair leaking connections with sealantof any kind.
Replaceo-ring or seal.
*NEVERconnect high pressure hose to nozzleextension.
*Keephigh pressure hose connectedto pump and spraygun
while system is pressurized.
* ALWAYSpoint spray gun in safedirection, press redbutton
andsqueezespray gun trigger to releasehigh pressure, every
time you stop engine.
*NEVERaim spraygun at people,animals, or plants.
*DO NOTsecure spray gun in open position.
*DO NOTleavespray gun unattendedwhile machine is running.
*NEVERuse aspray gun which does not have a trigger lock or
trigger guard in place and in working order.
*Alwaysbe certain spray gun, nozzlesand accessoriesare
correctly attached.
_, WARNING:Unintentionalsparking can result in fire or
_ electric shock.
WHENADJUSTINGORMAKINGREPAIRSTOYOURPRESSURE
WASHER
* Disconnectthesparkplugwirefromthesparkplugandplace
thewirewhereitcannotcontactsparkplug.
WHENTESTINGFORENGINESPARK
*Useapprovedsparkplugtester.
*DONOTcheckfor sparkwith sparkplugremoved.

A, WARNING: Starter and other rotating parts can
entangle hands, hair, clothing, or accessories.
• NEVERoperate pressure washerwithout protective housing or
covers.
• DO NOTwear looseclothing, jewelry or anything that may be
caught in the starter or other rotating parts.
• Tie up long hair and removejewelry.
A, WARNING: Riskof eyeinjury.
Spraycan splash backor propel objects.
• Always wear safetygoggles when using this equipment or in
vicinity of where equipment is in use.
• Beforestarting the pressurewasher, be sure you are wearing
adequatesafety goggles.
• NEVERsubstitute safety glasses for safety goggles.
NOTICE:High pressure spray may damagefragile items
including glass.
• DONOTpointspraygunatglasswhenusingMAX(0°) nozzle.
• NEVERaimspraygunat plants.
NOTICE: improper treatment of pressure washer can
damage it and shorten its life.
• If you have questions about intended use, ask dealer or contact
Sears.
• NEVERoperate units with brokenor missing parts, or without
protective housing or covers.
• DONOTby-pass any safety device on this machine.
• DONOTtamper with governed speed.
• DONOToperate pressure washer above rated pressure.
• DONOTmodify pressure washer in any way.
• Beforestarting pressure washer in cold weather, check all parts
ofthe equipmentto be sure ice hasnot formed there.
• NEVERmove machine by pulling on hoses. Use handle provided
on unit.
• Checkfuel system for leaksor signs of deterioration, such as
chafedor spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure washer.
• This equipment is designedto be usedwith Sears authorized
parts ONLY. If equipment is usedwith parts that DONOTcomply
with minimum specifications, userassumes all risks and
liabilities.

KNOWYOURPRESSUREWASHER
Readthe Operator's Manual andsafetyruJes beforeoperating yourpressurewasher.
Comparethe illustrations with your pressurewasherto familiarizeyourself with the locations of various controls and
adjustments. Savethis manualfor future reference.
A-Spray Gun-- Controlsthe application of water onto
cleaningsurfacewith trigger device,includes trigger lock.
B- PrecisionSprayTM Nozzles-- Max, General,Flush,Jet
Soap and DetergentNozzles:for various cleaning
applications.
C-Accessory Tray -- Provides convenientstorage for
accessories, such as gun, nozzles,etc.
D-Recoil Starter -- Usedfor starting the engine manually.
E- FuelTank -- Fill tank with regular unleadedfuel. Always
leaveroom for fuel expansion.
F-Air Filter -- Protects engine by filtering dust and debris
out of intake air.
G-Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
H-Choke Lever -- Preparesa cold engine for starting.
J - Pump -- Developshigh pressure.
I{ - Automatic CoolDownSystem -- Cycleswater through
pump when water reaches125°-155°F. Warm water will
dischargefrom pump onto ground. This system prevents
internal pump damage.
L-High Pressure Outlet -- Connectionfor high pressure
hose.
IVl- Water Inlet -- Connectionfor garden hose.
N- Bottle Bracket -- Cleaningsolution bottle fits in wire
form bracket here.
P - Nozzle Extensionwith QuickConnect-- Allows you to
switch betweenfive different PrecisionSprayTM nozzles.
R- Oil Fill/Dipstick -- Check,add and drain engine oil here.
S- HoseWrap and HighPressureHose-- Hosewrap
provides easytransport and handling of the high pressure
hose. Connectone end of hoseto water pump and the
other end to spray gun.
T =FoldDownHandle-- Handleand accessorytray fold fiat
atop cold enginefor space-saving storage.
U- ProjectPro@PerfectlVlWMSiphon -- Mixes concentrate
with pressure washer spray.
Items Not Shown:
Identification Label (near rear of base plate) -- Provides
model and serial number of pressurewasher. Pleasehave
these readilyavailableif calling for assistance.
Safety Goggles-- Always use the enclosed safetygoggles
when running your pressure washer.
Warning/Operating Instructions Tag-- identifies hazards
and proper procedureto start!stop pressurewasher.

Yourpressurewasherrequiressomeassemblyandisready
foruseonlyafterithasbeenproperlyservicedwiththe
recommendedoilandfuel.
Ifyou have any problemswith theassembly of your
pressurewasher, please call the pressurewasher helpline
at 1=800-222-3136.
UNPACKTHEPRESSUREWASHER
1. Removeeverythingfrom carton except pressurewasher.
2. Open carton completely by cutting each corner from top
to bottom.
3. Removepressure washer from carton.
5. Add fuel to fuel tank and FreshStart fuel cartridge to fuel
cap.
6. Connectpressure hoseto spray gun and pump.
7. Connectwater supply to pump.
8. Attach nozzleextension to spray gun.
9. Select/attach quick connect PrecisionSprayTM nozzleto
nozzleextension.
Attach Handle and Accessory Tray
1. Placehandle(A) onto handle supports (B) connectedto
main unit. Make sure holes (6) in handlealign with holes
(6) on handlesupports.
CARTONCONTENTS
Checkall contents, if anyparts are missing or damaged,call
the pressure washer helplineat 1-888-222-3136.
• Main Unit
• Handle
• AccessoryTray
• High PressureHose
• Spray Gun
• NozzleExtensionwith Quick ConnectFitting
•Oil Bottle
• HoseWrap
• Safety Goggles
• Bottle BracketWireform (2)
• PerfectMixTM Siphoning Unit/Hose
• FreshStart FuelCartridge
• Parts Bag(which includes the following):
• Operator's Manual
• Owner's Registration Card
• Bag containing 5 PrecisionSprayTM Nozzles
• HandleFasteningHardwareKit (whichincludes):
• HandleBolts (2)
• CarriageBolt (2)
• Plastic Knobsfor Handle(2)
• Rope Guide(1)
• Plastic Knob (3)
• TreeClips (4)
Becomefamiliar with eachpiece beforeassemblingthe
pressure washer. Identify all contents with the illustration on
page 6. If any parts are missing or damaged, call the
pressure washer helpline at1-800-222-3136.
ASSEMBLINGPRESSUREWASHER
Your Craftsmanpressure washer will needassembly before
operation:
1. Fill out and sendin registration card.
2. Attach handle,accessorytray, rope guide and hosewrap.
3. Connectdetergent siphon hoseto pump.
4. Add oil to engine crankcase.
2. insert handle carriagebolts (D) through holes from
inside of unit and attach a plastic knob (E) from outside
of unit. Tighten by hand. Byloosening both knobs to the
middle section of the attachmentbolt, the upper handle
canfold forward to store fiat atop the cold engine.
NOTE:DONOTfold the handle down while the engine is hot.
.Placeaccessorytray (F) over holes (6) on handle
(viewing from backof unit). Pushthe tree clips (H) into
the holes until they sit fiat against the accessorytray.
.
i
insert multi-colored PrecisionSprayTM nozzlesand other
supplied accessoriesin spacesprovided in accessory
tray. SeeHow to UseAccessory Tray.

.
.
Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Route engine recoil rope through
guide.
Align hosewrap (C)to the back side of accessorytray.
Locate notch with "unlock" icon (D) on hosewrap.
Position notch at top with hosewrap in vertical position.
Clips in the back of accessorytray should slide into the
grooves on the inside surface of hosewrap. Slide hose
wrap on back of accessorytray and rotate 1/8 turn until
"locked"icon (E) is in vertical position. Hosewrap is
easily removed from the accessorytray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hoseon the red makesit easyto wrap the hose
while it is detachedfrom the accessorytray.
StandardSiphonTube
Cleartube with filter:
When using the clear siphon tube, dilute
1 part PerfectlViixTM ExtremeConcentrate
to 16 parts water (4 oz of concentrate
makes1/2 gallon of mix.)
Attach Project Pro® PerfectMix TM Siphon to
Pump
Attach the hose end of the blue PerfectiVlixTM Siphon (J) to
the barbed hosefitting (K) on the pump.
Attach PerfectMi:xTM Detergent Siphon to
Concentrate BotUe
PlacePerfectlVlixTM bottle (not included) in the wire-form
bracketon the handle. Removecap from bottle and insert the
PerfectIVlixTM Siphon (L). Screwthe siphon unit to the top of
the bottle (IVl).Usethe clip on the cap (L) to snapsiphon to
wire form bracketwhen siphon is not in a concentrate bottle.
7. Attach bottle brackets (F) to handle supports with
carriage bolt (G) and black plastic knob (H). Tighten by
hand.
2-iN-1 Soap System
The pressurewasher is equippedwith two detergent
siphoning hoses.
Project Pro PerfectMix TM Siphon
Blue tube with blue bottle cap:
When usingthe blue PerfectiViixTM siphon, use
the PerfectMixTM ExtremeConcentratestraight
from the bottle
Add Engine Oil
1. Placepressurewasher on a fiat, levelsurface.
2. Cleanareaaround oil fill and removeyellow oil fill
cap/dipstick.
3. Using oil funnel (optional), slowly pour contents of
provided oil bottle into oil fill opening.
NOTICE: improper treatment of pressure washer can
damage it and shorten its life.
•DONOTattemptto crank or startthe engine before it has been
properly servicedwith the recommended oil. This may result inan
enginefailure.
4. Replaceoil fill cap/dipstick and fully tighten.

AddFuel
Fuel mustmeet these requirements:
*Clean,fresh, unleadedgasoline.
*A minimum of 87 octane/87 AKI (91 RON).High altitude
use, see HighAltitude.
, Gasolinewith up to 10% ethanol(gasohoi) or up to 15%
MTBE (methyl tertiary butyl ether) is acceptable.
NOTICE:Avoid pressure washer damage.
Failureto follow Operator's Manualfor fuel
recommendationsvoids warranty.
• DONOTuseunapprovedgasolinesuchasE85.
• DONOTmixoil in gasoline.
•DONOTmodifyengineto runonalternatefuels.
Toprotectthe fuelsystemfrom gum formation, mix in a fuel
stabilizerwhenaddingfuel. SeeStorage.All fuel is notthe
same.if you experiencestarting or performanceproblems after
usingfuel, switch to a differentfuel provideror changebrands.
This engineiscertifiedto operateon gasoline.Theemission
control systemfor this engineis EM(EngineModifications).
_i, WARNING: Fueland its vapors are extremely
flammable and explosive.
Fireor explosion can causesevere burns
or death.
WHENADDINGFUEL
• Turn pressure washerOFFand let it cool at least2 minutes
before removing fuel cap. Loosen capslowly to relievepressure
in tank.
• Fill fuel tank outdoors.
•DONOToverfill tank. Allow spacefor fuel expansion.
•If fuel spills, wait until it evaporatesbefore starting engine.
•Keepfuel awayfrom sparks, open flames, pilot lights, heat,and
other ignition sources.
•DONOTlight a cigarette or smoke.
.
2. Cleanarea around fuel fill cap, remove cap.
Slowly add regular unleadedfuel (A) to fuel tank (B). Be
careful not to overfiN.Allow about 1.5" (4 cm) (6) of tank
spacefor fuel expansion.
/F- -- /s ....... _s- --_/- /s-- -_/ ...... _F- /f -/f- /F- -
f • JF -¸ 1_/- - //- !f - _- J/- - - J/" - - /F" •/F" /f • - iF- • J
3. InstaNfuel capand wait for any spilled fuel to evaporate.
CAUTION!Alcohol-blendedfuels (called gasohol, ethanolor
methanol) can attract moisture, which leadsto separation and
formation of acids during storage.Acidic gascan damagethe
fuel system of an enginewhile in storage.
To avoid engine problems, the fuel system should betreated
with a fuel preserver or emptied beforestorage of 30 days or
longer. If adding a fuel preserver,fill the fuel tank with fresh
fuel. If only partially fined, air in the tank win promote fuel
deterioration during storage. If fuel preserver is not used,
drain the fuel tank, start the engine and let it run until the fuel
lines and carburetor are empty. Usefresh fuel next season.
SeeStoragefor additional information.
NEVERuse engineor carburetor cleaner products in the fuel
tank as permanentdamage may occur.
FreshStartFuelCap
Adding fuel preserverhelps keepfuel fresh and carburetors
cleanfor easierstarting, all seasonlong. This new fuel cap
automatically drips concentrated fuel preserver into your fuel
tank.
_i, BANGER:Contentsare harmful or fatal if swallowed.
Avoid contact to eyes,skin or clothing.DONOTtake Avoid
internally. breathing
the mist or vapor. Overexposureto eyes
or skin cancause irritation. Keepstabilizer out of the
reachof children.
Fuelstabilizer is a hazardous chemical.**
• If SWALLOWED,callphysicianimmediately.
•Inthecaseof anemergency,contacta physicianimmediately
andcall1-800-424-9300for materialsafetyinformation.
• *Fuel stabilizer contains: 2,6-di-tret-butylphenol (128-39-2) and aliphatic
petroleum distillate (64742-47-8).
1. Placecartridge into fuel cap.
2. Pushto "snap" cartridge into place.
3. Removetab to expose membrane.
IMPORTANT:DONOTremove the silver foil sealon the
opposite side.
4. Reinstallfuel cap onfuel tank.
5. Periodicallycheck the cartridge to ensure there is still
fuel stabilizerinside.If itis empty, removecartridge and
replace.

High_titude
Ataltitudesover5,000feet(1524 meters),a minimum 85 octane
/85 AKI(89 RON)gasolineis acceptable.To remainemissions
compliant,highaltitudeadjustmentis required.Operationwithout
this adjustmentwill causedecreasedperformance,increasedfuel
consumption,andincreasedemissions.Seea qualifiedSears
dealerfor highaltitudeadjustmentinformation.Operationofthe
engineataltitudesbelow2,500feet(762 meters)with the high
altitudekit isnot recommended.
Connect Hose and Water Supply to Pump
NOTICE:DONOTrun the pump without thewater supply
connectedand turned on.
•Damagetoequipmentresultingfrom failuretofollowthis
instructionwillvoidwarranty.
NOTE:Removeanddiscard theshippingcapsfrom the pump's
high pressureoutlet andwater inlet beforeattachinghoses.
1. Uncoil high pressure hose and attachone end of hoseto
baseof spray gun. Tighten by hand.
_, WARNING:The high pressure stream of water that this
equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
•NEVERconnecthighpressurehoseto nozzleextension.
•Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
•Alwaysbecertainspraygun,nozzlesandaccessoriesare
correctlyattached.
2. Attach other end of high pressure hoseto high pressure
outlet on pump. Tighten by hand.
.Beforeconnectinggarden hoseto water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged.DONOTrun pressurewasher if
inlet screenisdamaged or missing.
4. Runwater through garden hosefor 30 secondsto flush
it of debris. Turn off water.
iMPORTANT:DONOTsiphon standing water for the water
supply. Use ONLYcold water (less than 100%).
NOTICE:Using a OneWay Valve (vacuum breakeror check
valve) at pump inlet can cause pump or inlet connector
damage.
•ThereMUSTbeatleasttenfeetofunrestrictedgardenhose
betweenthepressurewasherinletandanydevice,suchasa
vacuumbreakeror checkvalve.
• Damageto equipment resulting from failure to follow this
instruction will void warranty.
5. Connectgarden hose(not to exceed50 feet in length) to
water inlet. Tighten by hand.
_, WARNING:Riskof eyeinjury.
Spray cansplash back or propel objects.
• Always wear safety goggles when using this equipment or in
vicinity of where equipment is in use.
•Before starting the pressure washer, be sure you are wearing
adequatesafety goggles.
•NEVERsubstitute safety glasses for safety goggles.
6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
ChecklistBeforeStartingEngine
Reviewthe unit to ensureyou haveperformed all of the
following:
1. Besure to read SafetyRules and Operationsections
before using the pressure washer.
2. Makesure handleis in placeand secure.
3. Checkthat oil has beenadded to proper level in engine
crankcase.
4. Add proper fuel to fuel tank.
5. Checkfor proper hoseconnections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
6. Provide proper water supply (not to exceed100%).
10