Kranzle B 10 200 User manual

Operating manualOperating manual
Operating manualOperating manual
Operating manual
Read and conformRead and conform
Read and conformRead and conform
Read and conform
safety instructionssafety instructions
safety instructionssafety instructions
safety instructions
before usebefore use
before usebefore use
before use
High prHigh pr
High prHigh pr
High pressuressur
essuressur
essure cleanerse cleaners
e cleanerse cleaners
e cleaners
GB
B 10/200
B 13/150
B 16/220

2
Dear Customer
We would like to congratulate you on your new portable/mobile high
pressure cleaner and to thank you for the purchase.
To ease your introduction to the use of the cleaner, we have provided the
following pages of explanations, tips and hints.
The equipment will assist you professionally in all cleaning tasks, e.g.:
- facades
- flagstones
- terraces
- vehicles of oll
types
- sheds
- channels
DescriptionDescription
DescriptionDescription
Description
- barrels and
containers
- machines
- streets
technical
specifications B 16/220B 13/150B 10/200
10 - 200 bar
220 bar
at 1800 rpm
10 l/min
70 °C
2,5 m
10 m
-
Honda GX 200 LX
22 kg
78 dB
approx. 32 Nm
29 Nm
41.182
41.182 1
10 - 150 bar
165 bar
at 1800 rpm
13 l/min
70 °C
2,5 m
10 m
15 m
Honda GX 160 CX
24 kg
78 dB
approx. 27 Nm
24,3 Nm
41.170
41.170 1
41.170 2
10 - 220 bar
240 bar
at 1800 rpm
16 l/min
70 °C
2,5 m
10 m
15 m
Honda GX 340 CX
26 kg
81 dB
approx. 38 Nm
33 Nm
41.173 2
41.173 3*
41.173
Permissible tolerance for figures ± 5 % in accordance with VDMA uniform sheet 24411
(assumed lenght of lance: 0,9 m)
operating pressure,
steplessly adjustable
permissible
overpressure
water output
hot water input up to
suction height
high pressure hose
with hose drum
engine
weight
sound level
according to
DIN 45 635
recoil at lance
torque
order No.
portable
with undercarriage
with undercarriage
and hose drum
with speed
control *

Item
3
water
8
9
6 Injector for cleaning agents
(not with B10/200)
7 High pressure hose
8 Spray gun assembly
9 Interchangeable lance
10 Regulator nozzle
10a B10/200 only with dirt-killer
1 Water inlet connection with filter
2 Suction hose with filter
(special accessory) order No. 15.038 3
3 High pressure pump
4 Pressure gauge with glycerin filling
5 Unloader valve - safety valve
The KRÄNZLE B 10/200 + B 13/150 + B 16/220 - high pressure cleaners
are portable/mobile machines. The design can be seen from the diagram.
Construction
DescriptionDescription
DescriptionDescription
Description
1
2
3
4
5
6
7
10

4
The machine can only be operated when the safety trigger is squeezed.
When the lever ist squeezed, the spray gun opens. The liquid is then pumped to the
nozzle. The spray pressure increases and quickly reaches the selected operating
pressure.
When the trigger ist released, the trigger gun closes and any further spraying of
liquid from the lance ist stopped.
The increase in pressure when the trigger gun is closed causes the unloader valve-
safety valve to open. The pump remaines switched on and continues to pump liquid
throughthepumpatreducatedpressure.
When the trigger gun ist opened, the unloader valve - safety valve closes and the
pump ressumes pressure spraying from the lance.
The trigger gun is a safety device. Repairs should only be performed by
qualifiedpersons.Shouldreplacementparts be required, use only
componentsauthorizedbythemanufacturer.
Lance with trigger gun
The unloader valve - safety valve protects the machine from a build-up of excess
pressure, and is designed not to permit an excess pressure to be selected for
operating. The limit nut on the handle is sealed with a spray coating.
The operating pressure and spray rate can be steplessly adjusted by tuning the
handle.
Replacements,repairs,newadjustments and sealing should only be
performedbyqualifiedpersons.
Unloader valve - safety valve
Environmental,refusedisposal andwaterprotection
regulationsmustbe observed !
Water - and Cleang - Care System
Water can be connected at mains pressure to the high pressure pump or it can be
sucked directly from a storage tank.
The water is then forced under pressure by the high pressure pump to the lance.
The high pressure jet is formed by the nozzle at the end of the lance.
Cleaning and caring agents can be mixed with the water by a low pressure injector.
(notwithB10/200)
DescriptionDescription
DescriptionDescription
Description

DescriptionDescription
DescriptionDescription
Description
For the motor follow the HondaFor the motor follow the Honda
For the motor follow the HondaFor the motor follow the Honda
For the motor follow the Honda
operating manual onlyoperating manual only
operating manual onlyoperating manual only
operating manual only..
..
.
Motor-safety:
(see Honda operating manual)
5
Honda motors are safe and reliable if they are operated correctly. Read the
operating manual carefully before using the motor and try to understand the
contents of the manual completely.
Not following this advice could lead to injuries or damage of the
equipment.
To avoid a possible fire hazard and to ensure the necessary ventilation
the motor has to be operated at a distance of at least 1 m from buildings
and objects. Inflammable objects have to be kept away from the
surroundingareaofthemotor.
Children and pets have to be kept away from the motor, as there is a
danger of suffering burns from hot motor parts and to be injured by
equipmentdriven by themotor.
Get to know the motor and especially learn how to switch it off quickly.
Do not allow persons to operate the motor who are not familiar with it.
Whenrunningyour high pressure cleaner with hotwaterof70°Craised
temperaturesoccur.
Do not touch the machine without safety gloves.
CAUTION !
Never use liquid containing solvents such as paint thinners, petrol, oil or
similar liquid matter. Pay attention to the instructions of the
manufacturers of the cleaning agents. The seals in the
machine are not resistant to solvents. The spray of solvents is
inflammable,explosiveandpoisonous.
Neither set up and operate the machine in rooms where there is a risk of
fire or explosion nor put it into puddles. Do not use the machine under
water.
CAUTION !
Setting up: Location

6
DescriptionDescription
DescriptionDescription
Description
Brief operating instructions
1. Connect the high pressure hose with spray gun
and machine.
2. Connect the suitable water supply.
3. Flush the air from the pump (open and close the spray gun
severaltimes).
4. Switch on the motor while the spray gun is open and commence
cleaning.
5. After completing the work, completely empty the pump
(switch the motor on for approximately 20 seconds without the
suction and pressure hose).
Afterwards you can roll up the high pressure hose.
- Only use clean water ! Protect from frost !
CAUTION !
Please pay attention to the regulations of your waterworks company.
In accordance with DIN 1988, the machine may not be directly connected to the
public drinking water supply lines.
Abriefconnectionhowever ist permissible according to DVGW (German
Association for Gas and Water Affairs) if a tube ventilator with check valve
(KRÄNZLE Order-No. 41.016 4) is built into the water supply.
Also indirect connection to the public drinking water supply lines is permissible by
way of free emission in accordance with DIN 1988, part 4; e.g. by using a reservoir
with a float valve.
Direct connection to a non-drinking water supply line is permissible.
High pressure hose and spray device
The high pressure hose and spray device supplied with the machine are made of
high grade material, they are also optimized for the machine and marked as
requiredbytheappropriateregulations.
If replacement parts are required, only such parts that are authorized by
themanufacturerandwhich bear the markings required by the
appropriateregulationsmaybe used. The high pressure hose andspray
device must be connected in a pressure-tight manner. The high pressure
hose may not be driven over, pulled excessively, or twisted. The hose
may under no circumstances be pulled over sharp edges, since
otherwise the guarantee is automatically void.

7
Always aim the
underbody lance. Note
when using an angle
underbody lance, like
for example lance
No. 41.075, that there
is a certain amount of
torque (twisting
motion) in the recoil.
(See also notice on
page 2).
As to the recoil -
see notice on page 2.
Apply the safety catch on the
spray gun after each use, in
order to prevent
unintentional spraying.
Safety notesSafety notes
Safety notesSafety notes
Safety notes

8
This is what you´ve purchased :This is what you´ve purchased :
This is what you´ve purchased :This is what you´ve purchased :
This is what you´ve purchased :
1. Spray lance with regulator and
high pressure nozzle, flat spray
(B10/200 only with dirt-killer)
2. Spray gun with insulated pistol
grip and screw connection
3. KRÄNZLE - High pressure cleaner
B 10/200 B 13/150 B 16/220
4. High pressure hose 10 m
15 m HP-hose for cleaners
with hose drum
5. Suction hose
6. Operating instructions pump
Operating instructions motor
7. Washing powder
specimen
8. Water inlet components

9
1. Oil-measuring stick
Prepare for usePrepare for use
Prepare for usePrepare for use
Prepare for use
2. Connect the high pressure
lance to the spray gun.
3. Unwind the high pressure hose
without leaving kinks or "nooses"
and connect it to the spray gun and
pump. When using extension
hoses, use max. 20 m high
pressure hose, or 2 x 10 m with
hose connectors.
The high pressure hose
connected from the machine to
the lance.

10
Water
CAUTION !
5. Maximum induction height 2.5 m
- see technical data
on page 2.
Please make
sure that the filter is
clean before using
your
high pressure cleaner.
4. The machine can be connected
to a pressurised water line with cold
or 60 °C respectively 70 °C hot water
(see
page 2).
Ensure that the water supply ist clean
when sucking from external sources.
The hose cross section must be
at least 1/2" = 12.7 mm (free
passage). Filter 1 must
always be clean.
Preparation for usePreparation for use
Preparation for usePreparation for use
Preparation for use
Whenrunningyour high pressure cleaner with hotwaterof70°Craised
temperaturesoccur.
Do not touch the machine without safety gloves.

11
Preparation for usePreparation for use
Preparation for usePreparation for use
Preparation for use
1. Switch off the machine
2. Cut off the water supply
3. Open the spray gun briefly until the pressure is released
4. Apply the safety catch on the spray gun
5. Remove the water hose and high pressure hose
6. Drain the pump: switch on the motor for approx. 20 seconds
7. Winter: store the pump in rooms above 0° C
8. Clean the water filter
To shut down the pump:
Note that you must always comply
with the instructions provided by the
manufacturer of the cleansing
agent (e.g. instructions
concerning safety clothing) and
the water protection egulations.
A mixing ratio of 3-5% is achieved
when the Vario-Jet is fully turned on.
pH value neutral 7-9.
Place chemical filter no. 5 in the reservoir with
the cleansing agent. Turn on Vario-Jet No. 4 to
enable the injector to induct the cleansing
agent. By turning back the Vario-Jet nozzle, the
supply of chemical is automatically cut off.
Allow the cleansing agent to take effect and
then remove with high pressure spray.
When using cleansing agents:
Adjusting the pressure
This is accomplished by turning the handwheel.
The default setting is maximum pressure.
p max.
Chem.
Turn on regulator nozzle
to reach low pressure.

12
This is prohibitedThis is prohibited
This is prohibitedThis is prohibited
This is prohibited
Never allow
children to use the
high pressure
cleaner !
Never direct the
water jet at the
machine itself !

13
Never direct the
water jet at people
or animals !
Never pull the high
pressure hose if it
has formed kinks or
"nooses"!
Never pull the hose
over sharp edges !
This is prohibitedThis is prohibited
This is prohibitedThis is prohibited
This is prohibited

14
Additional KRÄNZLE accessoriesAdditional KRÄNZLE accessories
Additional KRÄNZLE accessoriesAdditional KRÄNZLE accessories
Additional KRÄNZLE accessories
(not with B 10/200)
Environmental, refuse disposal and water
protection regulations must be observed
when using the accessories.
Rotary scrubbing brush
Order No. 41.050 1
Sandblaster
Order No. 41.068 1
Underbody lance, new
Order No. 41.075
Flat brush
Order No. 41.073
Drain and pipe
cleaning hose
8 m - Order No. 41.051
15 m - Order No. 41.058
Dirtkiller
B 10/200
Order No. 41.073 8
B13/150
Order No. 41.072 5
Turbokiller
B 16/220
Order No. 41.072 4

15
for further combination possibilitiesfor further combination possibilities
for further combination possibilitiesfor further combination possibilities
for further combination possibilities
Car cleaning, glass, caravan, boat etc.:
rotary washing brush with 40 cm extension
and
ST 30 nipple M 22
Cleaning cars and all smooth surfaces:
brush with ST 30 nipple M 22.
Underbody cleaning of cars, trailers and
equipment: lance 90 cm with high pressure
nozzle and ST 30 nipple. The lance must
be aimed when spraying. Blasting old paint, rust and facades:
sandblasting injector with suction lance and
3 m PVC hose and ST 30 nipple M 22.
Rotary point sprayer for extreme soiling:
dirt killer with 40 cm extension and
ST 30 nipple M 22.
Cleaning pipes, channels and drains: Pipe
cleaning hose with KN nozzle and
ST 30 nipple M 22.
When sandblasting you must
wear protection clothes! Pay
attention to the instructions of
the manufacturer of the
abrasive.

16
Small repairs –Small repairs –
Small repairs –Small repairs –
Small repairs –
The pressure gauge shows a 10% higher pressure than the
workingpressure.
Theinjectormaybedirty
andyou
shouldfirst
remove
thehose.
Nowturnonthewater
andyoushouldgeta
powerfulstreamofwater,
but if you
only get a weak
flowofwater
thenstraighten
apaperclip,
andreleasethe
injectorwithan
open-ended
spanner.
Checkthatit
isclean.
Reconnectthehose, andyouare
readytocontinue
yourwork.
You only get a weak flow of water or no water at all !
Removetheinjector
togetherwiththe
springandreturn
valve.
Cleaningtheinjectorthrough
frombothsidesandreplace
thereturnvalve.

17
The nozzle is blocked !
No water but the gauge shows full pressure.
Rinsethehosethrough
first. Youshouldnowhave
apowerfulstreamof
water,
removethelanceand
cleanthe
nozzle.
Usingtheflatspray lance
youonlyhavetocleanthefront
nozzle.
Straightenapaperclip
andcleanthenozzle.
Insertpointed opject
intothehole
andpullthecapback!
Checkvisually whether the
nozzleis clean. Now it works as well
asbefore.
Do it yourself !Do it yourself !
Do it yourself !Do it yourself !
Do it yourself !
butifyouonly
getafewdrops
ofwaterfrom
thelance,

18
Small repairs - Do it yourself !Small repairs - Do it yourself !
Small repairs - Do it yourself !Small repairs - Do it yourself !
Small repairs - Do it yourself !
Valve dirty or sticky !
Pressure gauge does not show full pressure.
Water comes out in spurts.
Ifyoudonot usethe highpressure cleanerfor sometime thevalves canstick.
Straightena
paperclip...
thegauge
showslittle
pressureor
nopressure
at all.
orthe high
pressure
hosevibrates!
Openthe
valveswith a
socketwrench...
removethe
valvescrew, the
valveandthe
O-ring.
Rplacetherubber
O-ring.
andremove thedirt
fromthe valve-the
insidemustbe
closed.
Retightenthe
valve screw,
and repeat an
all 6 valves.
Now it works as
well as before.
The high-pressure hose
vibrates.
Whenavalve is blocked.

19
General rulesGeneral rules
General rulesGeneral rules
General rules
The machine must be inspected according to the "Guidelines for Liquid
Spray Devices" at least once every 12 months by a qualified person, to
ensure that continued safe operation is guaranteed. The results of the
inspection are to be recorded in writing. This may be done in any form.
Inspections:
The machine is designed for accidents to be impossible if used correctly.
The operator is to be notified of the risk of injury from hot machine parts and
the high pressure water jet. The "Guidelines for Liquid Spray Devices" must
be complied with. (see page 12 and 13)
Accident prevention
Check the oil level with the oil-measuring stick prior to each
use.
(Ensure horizontal position!)
Oil change B10/200 ; B13/150:
No oil change is required during the working life of the machine. However,
should it be necessary to change the oil in the event of repairwork, the oil
sight glass is to be opened over a reservoir and the machine to be emptied.
The oil is to be caught in the reservoir and disposed of in the approved
manner.
New oil: 0,5 l - Motor oil W 15/40
Oil change B16/220:
The oil of your high pressure pump should be changed after approx. 40
hours of operation, or no later than when it takes an a grey or whitish colour.
Open the oilplug over a container and drain off all the oil. The oil must be
caught in a contianer and disposed of in a responsible, legal manner.
New oil: 1,0 l - Castrol Formula RS
The guarantee period is 12 months according to VDMA.
The guarantee is void if changes are made in the safety devices or if the
machine is used at excess temperatures or speeds. The guarantee is also
void if the machine is used with a voltage below the required rating, with less
than the required amount of water, with dirty water and external damage to
the pressure gauge, nozzle, high pressure hose and spray device.
This guarantee is not applicable for spare parts.
Our operating instructions must be complied with.
Guarantee

20
Complete AssemblyComplete Assembly
Complete AssemblyComplete Assembly
Complete Assembly