Crane 26306575 Operating instructions

TROUBLESHOOTING
Problem
The Heart Rate Watch isnot showing the distance Itravelled correctly.
Causes and solutions
−The stride length for walking and running have not been correctly set. Re-enter the stride
length as described in chapter“Training zone, heart rate alarm and stride lengthsettings”.
−You have selected a different walking and running tempo than when entering your stride
length.
−Shuffling gait, bad footwear and uneven terrain have led to inconsistent measuring.
−Climbing hills or stairs has led to a lower distance measurement as thewatch is only suitable
for activity on flat surfaces.
Problem
The Heart Rate Watch is not working correctly.
Causes and solutions
−Your heart rate is under 40 beats per minute.
−Make sure the strap is not too tightly or loosely fastened. Ideally, place the watchbehindthe
wrist bone.
Problem
The display light is not working.
Causes and solutions
−Charge the HeartRate Watch battery.
Problem
The battery is not charging.
Causes and solutions
−Connect the charger cable as described in the chapter “start-up”.
−Make sure that the USB connection that you plugged your Heart Rate Watch into has a
source of electricity.
Problem
No display
Causes and solutions
−The Heart Rate Watch could possibly be switched off. Press and hold any button for approx. 2
seconds to switch the watch on.
The battery could possiblybe empty. Charge the battery.
The contrast is possibly set too low. Turn up the contrast (see chapter “basicsettings”).
Problem
Display is dark
Causes and solutions
−The Heart Rate Watch could possibly be overheating (sunlight, surrounding temperature too
high). Leave the watch to cool down.

Problem
Display is very unresponsive
Causes and solutions
−Once the temperature increases above 0 °C again, thedisplay should return to normal.
Problem
No heart rate display
Causes and solutions
−The optical sensor for monitoring the heart rate on the underside of the case is dirty. Clean
the sensor as described in chapter “Cleaning and maintenance”.
−The Heart RateMonitor battery is low. Charge the battery as described in chapter “Charging
the HeartRate Watch battery”.
Problem
Workout cannot be started
Causes and solutions
−The maximum workout time of 9 hours, 59 minutes, 59 seconds has been reached. The dis-
play will show “FULL”. Delete the workout data as described in chapter “resetting records”.