Crate&Barrel ASCEND User manual

HARDWARE
TOOLS REQUIRED
Made in Indonesia - r04 Page 1 of 2
Thank you for purchasing the Ascend Wide Stacking
Shelves with Doors. This page lists all the contents
included in the box. Please take time to identify the
hardware as well as the individual components of this
product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to
protect them from damage.
Note: 2 people are required to safely stack and secure
these units.
ASCEND WIDE STACKING SHELVES WITH DOORS
Missing hardware? Please call 800.606.6387 for replacements.
2 - long
screws
2- mending
plates
4 - strap
brackets
2 - drywall anchors 2 - wall straps
10 - short
screws
Phillips Head Screwdriver
Drill with 1/4” diameter drill bit
Hammer
Customer Service 800.967.6696 |www.crateandbarrel.com
1 With the assistance of another adult, stack shelving units as shown, with pilot holes on each shelf at the back. Note: Do
not stack over 5 units high.
Align 1 mending plate with each set of pilot holes and attach with 4 short screws per plate. Secure, but do not over tighten
each screw with a phillips head screwdriver.

These instructions are for drywall mounting only.
For safe installation it is essential to use hardware
appropriate for your wall type. Mount to wood wall
studs whenever possible. If you are unsure of what
type of fasteners to use, consult your local hardware
store or a qualified professional. This product is only
deterrent, it is not a substitute for proper adult
supervision.
A. With the assistance of another adult, place the unit in
desired location against the wall. Mark the location of the
strap brackets installed in Step 2 on the wall. Move the
unit out of the workspace.
B. Drill 2 - 1/4”diameter holes at each mark on the wall.
Insert 1 drywall anchor into each hole and gently tap with
a hammer until flush with the wall surface.
C. Insert 1 long screw through each strap bracket and
into the drywall anchor. Secure, but do not over tighten
with a Phillips head screwdriver.
D. Place the shelving unit back into position against the
wall and thread the wall strap through both brackets and
pull until tight.
WALL MOUNTING INSTRUCTIONS
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A, B
C
D
Made in Indonesia - r04 Page 2 of 2
ASCEND WIDE STACKING SHELVES WITH DOORS
Customer Service 800.967.6696 |www.crateandbarrel.com
2 Attach 2 strap brackets to back of the top shelving unit with 2 short screws. Secure with a phillips head screwdriver.