Crate&Barrel LINEA BED WITH SLATS User manual

SYMBOLS
NOTICE
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION
HARDWARE ( AS LISTED ABOVE )
PARTS TO BE INSTALLED
HARDWARES
LINEA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
X2
USE SCREW DRIVER
TO TIGHTEN
USE HANDNUMBER OF
PERSON NEEDED
DIRECTION
Crate&Barrel
TOOLS (Not Included in Package)
RUBBER HAMMER
1. HEADBOARD 1pc
2. FOOTBOARD 1pc
3. SIDERAILS 2pcs
4. 1pcs
5. 1pc
6. 13pcs
CENTER SUPPORT
CENTER LEG
SLATS
SCREW DRIVER
Crate&Barrel
DRILLING MACHINE
USE DRILLING
MACHINE
3
2
3
5
6
4
1
SCREW Ø6 x 2'
(1X)
SCREW Ø6 x 3'
(4X)
NUT
(4X)
METAL CORNER
(4X)
WASHER
(4X)
SCREW Ø4 x 2cm
(32X)
1/3

Crate&Barrel
B.
INSTALLING METAL CORNER
CONNECTING SIDE RAIL AND HEAD / FOOT BOARD
A. 12
3
4
HEAD BOARD
SIDE RAIL
FOOT BOARD
SIDE RAIL
1
2
3
3
12
3
LINEA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
2/3

Crate&Barrel
D.
INSTALLING SLATS
INSTALLING CENTER LEG + CENTER SUPPORT
C.
1
NOTE:
- SLATS TO BE ASSEMBLED ARE NUMBER. 1 AND 13
3
Position
Tighten the screws if needed
4
4
5
6
LINEA BED - WITH SLATS
ASSEMBLY INSTRUCTION FOR BED INSTALLATION
2
CENTER SUPPORT
CENTER LEG
- INSTALL THE CENTER LEG FIRST.
- USE SCREW Ø6x2'
2
1
3/3