Creative OS113 User manual

REF: OS113
pg 1 of 22 15.03.2019
OS113 - OCTAVIA COMPLETE (6M)
Installation Instructions

REF: OS113
pg 2 of 22 15.03.2019
SEATING & SIDES PARTS / ASSEMBLIES
UPRIGHT TIMBERS
PARTS REQUIRED
SIDE ASSEMBLIES
SEAT SLATS - INNER (SET)
SEAT SLATS -END (SET)
SEAT SUPPORT ASSEMBLY
SEAT SUPPORT ASSEMBLY
SA - QTY x 7
SS-I - QTY x 5
SS-E - QTY x 2
SSA-I (INNER) - QTY x 13
SSA-E (END) - QTY x 2
UPRIGHT MAIN TIMBER
UPRIGHT ADDITIONAL TIMBER
UMT - QTY x8
UAT - QTY x12

REF: OS113
pg 3 of 22 15.03.2019
FLOOR - DECKING
FLOOR ASSEMBLY
FLOOR SURROUND ASSEMBLY
FLOOR SUPPORTS
FD - QTY x54
FA-a / b / c
FA-a
FA-a
FA-b
FA-b
FA-c
FSA - QTY x8
FS
PARTS REQUIRED
FLOOR PARTS / ASSEMBLIES
x142
x656
x94
97.M8X120CSK
97.M8X80CSK
97.M8X180CSK
x1128
97.D4.5X60 (DECK SCREW)
INCLUDES
INCLUDES
FA-a - QTYx2
FA-b - QTYx2
FA-c - QTYx1
FS-A - QTYx4
FS-B - QTYx4

REF: OS113
pg 4 of 22 15.03.2019
ROOF TRIM / KING ‘POST’
ROOF MAIN SUPPORTS
ROOF SUPPORTS
ROOF BRACES
INCLUDES
INCLUDES
INCLUDES
INCLUDES
RT1 - QTYx2
RT2 - QTY x1
RT3a - QTY x4
RT3b - QTY x4
RT3c - QTY x4
RA-L- QTYx8
RA-R - QTY x8
RBA-u - QTY x 1 (SET)
RBA-l - QTY x 1 (SET)
RB-R QTY x 8 (RIGHT
RB-L QTY x 8 (LEFT)
RB-T QTY x 8
RT
ROOF ASSEMBLIES
RA-L & RA-R
RM - QTY x 8
RS - QTY x 8
RB
ROOF SUPPORTS ADDITIONAL
RBA
PARTS REQUIRED

REF: OS113
pg 5 of 22 15.03.2019
FOUNDATION DETAILS
FGL
UMT UAT
NOTES:
POST HOLES 400MM x 400MM

REF: OS113
pg 6 of 22 15.03.2019
FOUNDATION DETAILS
DATUM POINT
0,0 X
Y
1055mm
Y axis dimensions will be shown HORIZONTAL
X axis dimensions will be shown VERTICAL
1055mm
DATUM POINT

REF: OS113
pg 7 of 22 15.03.2019
INSTALLATION INSTRUCTIONS
1
2INSTALL THE UMT TIMBERS
POSITION FSA ASSEMBLIES
THE 90X90 TIMBER ON THE FSA ASSEMBLIES HELP POSITION THESE
POSITION THESE ON THE GROUND 120MM FACE ON THE OUTSIDE

REF: OS113
pg 8 of 22 15.03.2019
INSTALLATION INSTRUCTIONS
3
4INSTALL FLOOR ASSEMBLY - FA-a / FA-c
SCREW THE FAS ASSMBLIES TO THE UMT TIMBERS
USING - 97.M8X180CSK - QUANTITY X 24
USING - 97.M8X120CSK - QUANTITY X 32
FSA
FA-a
FA-c
FA-a
EN-
UMT

REF: OS113
pg 9 of 22 15.03.2019
INSTALLATION INSTRUCTIONS
5
6INSTALL FLOOR ASSEMBLY - FA-a / FA-c
ATTACH 8 x UAT TIMBERS TO THE FLOOR ASSEMBLIES
USING - 97.M8X180CSK - QUANTITY X 12
USING - 97.M8X180CSK - QUANTITY X 16
FA-c
FA-c

REF: OS113
pg 10 of 22 15.03.2019
INSTALLATION INSTRUCTIONS
7
8INSTALL FLOOR SUPPORTS - FS-A / FS-B
ATTACH REMAINING UAT TIMBERS TO THE FLOOR ASSEMBLIES
USING - 97.M8X120CSK - QUANTITY X 32
USING - 97.M8X180CSK - QUANTITY X 8
A
A
BB

REF: OS113
pg 11 of 22 15.03.2019
9
10 ENSURE TIMBERS ARE POSITONED AS SHOWN BELOW
ATTACH RS ROOF TIMBERS
TIMBERS ARE POSITIONED LEVEL WITH THE TOP OF THE UPRIGHT TIMBER
USING - 97.M8X80CSK - QUANTITY X 32
INSTALLATION INSTRUCTIONS
FA-c

REF: OS113
pg 12 of 22 15.03.2019
11
12 SCREW RM TIMBERS TO THE UPRIGHTS
ATTACH RM ROOF TIMBERS TO THE KING POST (RT1)
USING - 97.M8X180CSK - QUANTITY X 2 (PER RM TIMBER)
USING - 97.M8X180CSK - QUANTITY X 2 (PER RM TIMBER INTO KING POST)
INSTALLATION INSTRUCTIONS
RMRM
NOTES:
TAKE EXTRA CARE NOT TO SPLIT THE UPRIGHT
TIMBERS - HOLE LOCATION(S) SHOWN ABOVE

REF: OS113
pg 13 of 22 15.03.2019
13
14 SCREW THE RBA-U ROOF SUPPORTS TO THE RM TIMBERS
REPEAT FOR THE REMAINING RM TIMBERS
USING - 97.M8X120CSK - QUANTITY X 10
USING - 97.M8X180CSK - QUANTITY X 32 (4 PER RM TIMBER)
INSTALLATION INSTRUCTIONS

REF: OS113
pg 14 of 22 15.03.2019
15
16 ENSURE ALL TIMBERS ARE SCREWED INTO THE UPRIGHTS AND TOGETHER
SCREW THE RBA-L ROOF SUPPORTS TO THE RM TIMBERS
USING - BOTH 120 & 180 SCREWS
USING - 97.M8X120CSK - QUANTITY X 8 / 97.M8X180CSK - QUANTITY X 2
INSTALLATION INSTRUCTIONS
NOTES:
USE 180 SCREWS TO SCREW
THROUGH THE LOWER & UPPER ROOF
BRACE SUPPORTS

REF: OS113
pg 15 of 22 15.03.2019
15
16 SECURE THE 2 SECTIONS OF ROOF (L - R) TOGETHER
ATTACH THE RA-L / RA-R ASSEMBLIES TO THE RM TIMBERS
USING - 97.M8X80CSK - QUANTITY X 16 MIDDLE SECTION
USING - 97.M8X80CSK - QUANTITY X 10 (INTO EACH RM TIMBER EITHER SIDE)
INSTALLATION INSTRUCTIONS
RA-L
RM
RM
RA-R

REF: OS113
pg 16 of 22 15.03.2019
17
18 ATTACH THE ROOF TRIM TIMBERS
USING - 97.M8X80CSK
INSTALLATION INSTRUCTIONS
REPEAT FOR THE REMAINING ROOF ASSEMBLIES
USING - 97.M8X80CSK - QUANTITY X 36 PER ROOF PANEL
RA-L
RA-L
RA-L
RA-L
RA-R
RA-R
RA-R

REF: OS113
pg 17 of 22 15.03.2019
19
20 ATTACH THE ROOF TRIM TIMBERS RT3c
USING - 97.M8X80CSK - QUANTITY X 6 TIMBER (4 FOR THE ROOF CAP)
INSTALLATION INSTRUCTIONS
REPEAT FOR THE REMAINING ROOF ASSEMBLIES
USING - 97.M8X80CSK - QUANTITY X 6 TIMBER
RT3a
RT3a
RT3b
RT3b
RT3b
RT3b
RT3a
RT3a
RT3b
RT3b
RT3b
RT3b
NOTES:
RT3b HAS A ‘ANGLE CUT TOP’
RT3c
RT3c
RT3c
RT3c
RT3c
RT3c
RT3c
RT3c
RT1

REF: OS113
pg 18 of 22 15.03.2019
21
22 ATTACH 3 PIECE OF DECKING ‘EITHER SIDE’ OF THE SHELTER
USING - 97.D4.5X60 (DECK SCREW)
INSTALLATION INSTRUCTIONS
ATTACH ROOF BRACES - LEFT / RIGHT
USING - 97.M8X80CSK - QUANTITY X 4 PER TIMBER

REF: OS113
pg 19 of 22 15.03.2019
23
24 ENSURE SCREWS ARE POSITIONED AS HIGHLIGHTED BELOW
2 X DECK SCREWS INTO EACH SUPPORT BELOW (APPROX 20 SCREWS PER DECK BOARD)
INSTALLATION INSTRUCTIONS
CONTINUE INSTALLING DECKING
USING - 97.D4.5X60 (DECK SCREW) - APPROX 2MM BETWEEN EACH SLAT

REF: OS113
pg 20 of 22 15.03.2019
25
26 ENSURE TIMBERS ARE PRE-DRILLED AND COUNTERSUNK
2 X SCREWS TOP / BOTTOM EACH SIDE
INSTALLATION INSTRUCTIONS
INSTALL THE 7 X SIDE ASSEMBLIES
USING - 97.M8X80CSK - QUANTITY X 4 PER TIMBER