Creative Pavilion xl700 - Desktop PC User manual

Sound Blaster Live! Value Sound Card User's Guide
Safety Instructions
Introduction
Setup
Using the Sound Card
Software
Troubleshooting
Specifications
Internal Connectors
Regulatory
Information in this document is subject to change without notice.
© 1998-2000 Creative Technology Ltd. All rights reserved.
Trademarks used in this text: Sound Blaster and Blaster are registered trademarks, and the Sound Blaster Live! logo, the Sound Blaster PCI logo, EMU10K1, E-mu Environmental
Modeling, Environmental Audio, Creative Multi Speaker Surround, and DynaRAM are trademarks of Creative Technology Ltd. in the United States and/or other countries. E-Mu and
SoundFont are registered trademarks of E-mu Systems, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Creative Technology Ltd. disclaims any
proprietary interest in trademarks and trade names other than its own.
This product is covered by one or more of the following U.S. patents:
4,506,579; 4,699,038; 4,987,600; 5,013,105; 5,072,645; 5,111,727; 5,144,676; 5,170,369; 5,248,845; 5,298,671; 5,303,309; 5,317,104; 5,342,990; 5,430,244; 5,524,074; 5,698,803;
5,698,807; 5,748,747; 5,763,800; 5,790,837.
Version 1.00
July 2000
Contents: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/index.htm [1/2/2001 1:47:24 PM]

Back to Contents Page
Using the Sound Card: Sound Blaster Live! Value
Sound Card User's Guide
Using Sound Blaster Live! Value
Running MS-DOS games in Microsoft Windows
Selecting the Best Audio Options in a Game
Understanding the Installation Program in Windows 98 Second Edition
Understanding the System Resource Settings
Understanding the Environment Variables
Determining Resources
MS-DOS Mode Utilities
Changing Audio Card Settings
Creative Diagnostics
Back to Contents Page
Using the Sound Card: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/usage.htm [1/2/2001 2:09:34 PM]

Back to Contents Page
Understanding the Environment Variables: Sound
Blaster Live! Value Sound Card User's Guide
Overview • CTSYN Environment Variable • BLASTER Environment Variable
Overview
Environment variables are used to pass hardware configuration information to the software in
your system. For MS-DOS, your audio card includes the following:
CTSYN Environment Variable
● BLASTER Environment Variable●
CTSYN Environment Variable
The CTSYN environment variable points to the location of the CTSYN.INI file, which usually
resides in the Windows directory. The syntax for this variable is as follows:
CTSYN=path
where path is the location of the CTSYN.INI file.
BLASTER Environment Variable
The BLASTER environment variable specifies the base I/O address, IRQ line, and DMA
channels of the SB interface. Its syntax is:
BLASTER=A220 I5 D1 H5 P330 T6
The parameters in the command are as follows.
This
Parameter Specifies
Axxx SB interface’s base I/O address.
IxIRQ line used by the audio interface.
DxFirst DMA channel used by the audio interface.
HxSecond DMA channel used by the audio interface.
Pxxx MPU-401 UART interface’s base I/O address.
Understanding the Environment Variables: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/env_var.htm (1 of 2) [1/2/2001 2:09:42 PM]

TxCard type. xmust be 6.
Back to Contents Page
Understanding the Environment Variables: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/env_var.htm (2 of 2) [1/2/2001 2:09:42 PM]

Back to Contents Page
Regulatory: Sound Blaster Live! Value Sound Card
User's Guide
Safety Information • Notice for the USA • Notice for Canada • Compliance • Declaration of
Conformity
Safety Information
CAUTION: This device is intended to be installed by the user in a CSA/TUV/UL certified/listed
IBM AT or compatible personal computers in the manufacturer’s defined operator access area.
Check the equipment operating/installation manual and/or with the equipment manufacturer to
verify/confirm if your equipment is suitable for user-installed application cards.
ATTENTION: Ce carte est destiné à être installé par l’utilisateur, dans un ordinateur compatible
certifié CSA/TUV/UL ou listé IBM AT, à l’intérieur de la zone définie par le fabricant. Consulter
le mode d’emploi ou le fabricant de l’appareil pour vérifier ou confirmer si l’utilisateur peut y
installer lui-même des cartes périphériques.
Notice for the USA
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, this notice is not a guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
one or more of the following measures:
Reorient or relocate the receiving antenna.
● Increase the distance between the equipment and receiver.● Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician.●
CAUTION: To comply with the limits for the Class B digital device, pursuant to Part 15 of the
FCC Rules, this device must be installed in computer equipment certified to comply with the
Class B limits.
All cables used to connect the computer and peripherals must be shielded and grounded.
Regulatory: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/regs.htm (1 of 3) [1/2/2001 2:09:56 PM]

Operation with non-certified computers or non-shielded cables may result in interference to
radio or television reception.
Modifications
Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the device.
Notice for Canada
This apparatus complies with the Class "B" limits for radio interference as specified in the
Canadian Department of Communications Radio Interference Regulations.
Cet appareil est conforme aux normes de CLASSE "B" d’interference radio tel que spe’cifie’ par
le Ministère Canadien des Communications dans les règlements d’interfe’rence radio.
Compliance
This product conforms to the following Council Directive:
Directive 89/336/EEC, 92/31/EEC (EMC)
●
Declaration of Conformity
According to the FCC96 208 and ET95-19
Name: Creative Labs Inc.
Address: 901 McCarthy Boulevard
Milpitas, CA. 95035
United States
Tel: [phone]
declares under its sole responsibility that the product
Trade Name: Creative Labs
Model Number: CT4830
has been tested according to the FCC / CISPR22/85 requirement for Class B devices and
found compliant with the following standards:
EMI/EMC: ANSI C63.4 1992, FCC Part 15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Regulatory: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/regs.htm (2 of 3) [1/2/2001 2:09:56 PM]

This device may not cause harmful interference, and1. This device must accept any interference received, including interference that may cause
undesirable operation.
2.
Ce matériel est conforme à la section 15 des régles FCC.
Son Fonctionnement est soumis aux deux conditions suivantes:
Le matériel ne peut étre source D’interférences et1. Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un
fonctionnement indésirable.
2.
Compliance Manager
Creative Labs, Inc.
June 9, 1999
Back to Contents Page
Regulatory: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/regs.htm (3 of 3) [1/2/2001 2:09:56 PM]

Back to Contents Page
MS-DOS Mode Utilities: Sound Blaster Live! Value
Sound Card User's Guide
Overview • SBECFG.EXE • SBEMIXER.EXE • SBESET.EXE • SBEGO.EXE
Overview
The SB Live! Value card includes a few MS-DOS utilities. These utilities require the SB Live!
DOS driver SBEINIT.COM to be loaded.
SBECFG.EXE
Use the SBECFG.EXE utility to obtain the hardware settings and the status of the SB Live!
Value card.Typing SBECFG.EXE at the command prompt displays the following hardware
settings:
PCI Hardware Settings: Port, IRQ
● Sound Blaster Emulation: Port, IRQ, DMA● MPU-401 Emulation (GM, Roland MT-32/LAPC-1) Emulation: Port● Adlib Emulation: Port●
The emulation settings appear only if they are enabled.
SBEMIXER.EXE
Use SBEMIXER.EXE to change the volume levels of the MPU-401 instrument set used on the
SB Live! card. You can use SBEMIXER.EXE from the command line—useful for advanced
users who want to set up batch files with particular volume levels—or within the SBEMIXER
screen. The settings for SBEMIXER.EXE are independent of the Creative Mixer settings in
Windows 98 Second Edition.
To set SBEMIXER values in the command line:
At the DOS prompt, type the SBEMIXER command in a single line. Its syntax is:
SBEMIXER [/S:x] [/W:x] [/C:x] [/M:x] [/?]
where square brackets [ ] denote optional parameters, and:
This
Parameter Specifies
MS-DOS Mode Utilities: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/msdos.htm (1 of 3) [1/2/2001 2:10:42 PM]

/S:xSynth volume. xcan be a value from the range 0 to 127.
/W:xWave volume. xcan be a value from the range 0 to 127.
/C:xCD audio volume. xcan be a value from the range 0 to 127.
/M:xSynth MT-32/LAPC-1 mode. For x, 0 is Off, 1 is On.
/? View a short description of the parameters.
An example of an SBEMIXER command is
SBEMIXER /S:64 /W:120 /C:50 /M:0
which corresponds to "set the synth volume to 64, the Wave volume to 120, the CD audio
volume to 50, and turn off the Synth MT-32/LAPC-1 mode".
To set SBEMIXER values within the Mixer screen:
At the DOS prompt, type
SBEMIXER
The interactive editor mode allows you to change the mixer settings with the mouse, <Tab>,
<PgUp>, <PgDn>, or arrow keys.
Use the Save button to save the settings for the next session.
SBESET.EXE
Use SBESET.EXE to manually configure SB resources or disable SB Emulation. By default, SB
Emulation in DOS follows the Windows settings. For example, if you disable SB Emulation in
Windows, in the next boot to DOS SB Emulation in DOS disabled. Under rare circumstances
you may need to manually reconfigure DOS SB Emulation, for example, if there is conflict in
DOS before it can boot to Windows. SBESET.EXE is run from the command line.
To set SBESET values in the command line:
At the DOS prompt, type the SBESET command in a single line. Its syntax is:
SBESET [-Axxx] [-Ix] [-Dx] [-Hx] [-Pxxx] [-dx] [-wx]
where square brackets [ ] denote optional parameters, and:
This
Parameter Specifies
-Axxx SB interface’s base I/O address.
-Ix IRQ line used by the audio interface.
-Dx First DMA channel used by the audio interface.
MS-DOS Mode Utilities: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/msdos.htm (2 of 3) [1/2/2001 2:10:42 PM]

-Hx Second DMA channel used by the audio interface.
-Pxxx MPU-401 UART interface’s base I/O address.
-dx SB Emulation mode. For x, 1 is Off, 0 is On.
-wx Set x to 1 to use the Windows-assigned resource configuration.
Set xto 0 to use (your) user-assigned resource configuration
NOTE: See "Understanding the System Resource Settings" for a list of the possible
values.
An example of an SBESET command is
SBESET -A240 -I5 -D3 -w0
which corresponds to "set the SB interface’s base I/O address to 240, the IRQ line used by the
audio interface to 5, the First DMA channel used by the audio interface to 3, and use the
Windows-assigned resource configuration".
SBEGO.EXE
Use this to confirm whether SB16 Emulation is properly installed and working.
Back to Contents Page
MS-DOS Mode Utilities: Sound Blaster Live! Value Sound Card User's Guide
file:///C|/Terrys/msdos.htm (3 of 3) [1/2/2001 2:10:42 PM]