Creative Sound Blaster AE-9 User manual

使用产品前请阅读使用说明

1
Overview
A) Audio Control Module (ACM)
1. XLR/6.3mm Microphone In
2. +48V Phantom Power Button
3. Volume/Status Display
4. Headphone Impedance Selector Switch
5. ACM Link Cable
6. AUX In (Left/Right)
7. 3.5mm Microphone In (Mono)
8. 3.5mm Headset/Headphone In
9. 6.3mm Headphone Jack
10. SBX Button
11. Volume Control Knob / Headphone /
Speaker Switch
B) Sound Card
12. ACM Link Port
13. Front Left
14. Front Right
15. Rear
16. Center / Subwoofer
17. Optical Out
18. Optical In
19. Op-Amp Pair 1 (Single DIP)
20. Op-Amp Pair 2 (Dual DIP)
32 4
87 9 10 11
13
12
14
15
16
17 18
65 19 20
A BAudio Control Module (ACM) Sound Card

PC Power Supply Unit ^
Connecting The Power Supply
Sound Card Connector
Power Supply PCI
Express Connector
Pin Definition
1+12 VDC
2+12 VDC
3+12 VDC
4Ground (G)
5Ground (G)
6Ground (G)
3
2
1
6
5
4
Note:
- Only the use of PCI Express 6-Pin Connector is permitted.
- The PCIe connector must be connected to the sound card in a Pin-to-Pin matching conguration.
- DO NOT forcefully link the connectors if they do not t.
- DO NOT connect ATX 4Pin/P4/EPS Connectors to the Sound Card’s PCI Express Connector.
Doing so will cause damage to the Sound Card and / or PC / Power supply.
6
2
4
3
5
1
Ensure that the 6-pin PCI Express
power supply connector’s latch is
properly tted into the sound card
connector’s catch.
GND +12V
Pin Definition
1+12 VDC (Yellow)
2+12 VDC (Yellow)
3+12 VDC (Yellow)
4Ground (G) (Black)
5Ground (G) (Black)
6Ground (G) (Black)
GND+12V
^ Power supply unit must be 80 PLUS Bronze certied with a minimum of 500 watts power
output and a 2 x 6 PCIe connector.
GND
+12V
LatchCatch

Unplug the
computer’s
power cable
Remove the
computer’s case
1 2
A B
Remove the PCIe slot’s metal enclosure
(i) PCI slot
(ii) PCIe slot
Remove the existing sound card
12
Gently but rmly slot the
Sound Blaster AE-9 sound
card into the PCIe slot
C D
1
2Plug the power
cable back into
the computer
Replace the computer’s
case
Installing The Sound Card

Connecting Devices To The Sound Card
(vii) Center/Subwoofer
(ii) Front
(i) Y-Splitter Cable
Front (Left)
Front (Right)
2.0 / 2.1 Analog Speakers
(iii) Audio Inputs
(i) Y-Splitter Cable
Front (Left)
Front (Right)
A5.1 Analog Speakers D
(vi) Rear (vii) Center/
Subwoofer
(ii) Front
(vi) Rear
(ii) Front
(v) Optical In
(iv) Optical Out
AV Receiver Blu-ray / DVD Player
CB

Connecting Devices to The Audio Controle Module (ACM)
*1/8” to 1/4” adapter not included / Adaptateur de 1,8” à ¼” non inclus / Adapter von 1,8 ”bis ¼” nicht enthalten / adaptador 1.8¨
a ¼¨ no incluida / *1.8” to ¼” adapter ikke inkluderet / *1.8” > ¼” -adapteri ei tule mukana / *1.8” til ¼” adapter er ikke inkludert
/ *1.8” to ¼” adapter ej inkluderat / Adapter 1,8” do ¼” niedołączony do zestawu / Redukce z 1,8” na ¼” není součástí balení /
Adaptér 1.8” na ¼” nie je súčasťou balenia /󲠮󳱶󲀯 / 󾙕󾙕󼌣󻂀󼺟󻀃󾖴󽅛󽋗󻆇󼌣󾖴󼓷󼜯
󼊹󼀤󻀷󻁓/ 󱘗󱹌󲀯󾙕󸱏󾙕󸵴󹀢󲏝 / Адаптер 1.8” к ¼” не включен
ACM Link Port
ACM LINK
LEFTRIGHT
OR
OR
Note:
- Do not connect ACM Link’s Cable to other
mini-HDMI Ports on other devices.
- Do not connect other mini-HDMI devices
to the ACM Link Port of the Sound Card.
**

Display & Control Interface
DC
A
(D) Volume Knob
Press and hold
for 2 secs
Switch between the headphone and speaker output
Headphone Mode
Speaker Mode
Press and hold
for 4 secs
Turn off volume LED
Turn on volume LED
(C) Headphone Impedance Selector Switch
IEM: 16 - 31Ω in-ear monitor
Normal(N): 32 - 149 Ω in-ear / headphones
High: 150 - 600 Ω headphones
(E) SBX Button
ON: SBX Acoustic Engine is switched ON
OFF: SBX Acoustic Engine is switched OFF
(A) +48V Button
ON: Enable +48V Phantom power to XLR mic
OFF: Disable +48V Phantom power to XLR mic
+48V Phantom power is available on XLR connector only.
E
B
(B) Volume Display
dB Min.
dB Max.

Download
Unlock your Sound Blaster AE-9 with the Sound Blaster Command software.
Download at creative.com/support/SBAE-9
With Sound Blaster Command, you can:
• Experience professionally-tuned audio presets for gaming,
movies and music
• Personalize audio effects with Sound Blaster Acoustic Engine
• Setup speakers and headphones conguration
• Adjust playback and recording settings
Warranty information is supplied with your product in a
separate document.
Please keep your Proof of Purchase for the duration of the
Warranty period.
Warranty
Keep this document for future reference.
Product Registration
Registering your product ensures you receive the most appropriate service and
product support available. You can register your product during installation or at
www.creative.com/register.
Please note that your warranty rights are not dependent on registration.
Technical & Customer Support Services
Visit creative.com/support/SBAE-9 to resolve and troubleshoot technical queries
at Creative’s 24-hour self-help Knowledge Base. You can also nd customer
support services and other helpful information here.
Other Information
Supplementary documentation for this product including DoC and safety and
regulatory information can be creative.com/support/SBAE-9.

Model No. / 型號 / 型号: SB1780, SB1790
creative.com/support/SBAE-9