Crestron iLux CLS-C6 User manual

CrestronCLS/CLSI-C6&CLS/CLSI-C6M
iLux™LightingSystem
OperationsGuide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2006 Crestron Electronics, Inc.

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux™Lighting System
Contents
iLux™ Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Specifications ..............................................................................................................4
Physical Description....................................................................................................4
Industry Compliance ...................................................................................................8
Setup..........................................................................................................................................9
Network Wiring...........................................................................................................9
Identity Code...............................................................................................................9
Installation...................................................................................................................9
Hardware Hookup .....................................................................................................11
Adding External Power Supplies...............................................................................11
Configuring the CLS-C6..........................................................................................................12
Configuring With Front Panel Controls ....................................................................12
Configuring With iLux Designer...............................................................................21
Console Command Settings ......................................................................................23
Replacing the Function Button Label........................................................................24
Programming Software............................................................................................................26
Earliest Version Software Requirements for the PC .................................................26
Programming with Crestron SystemBuilder/D3 Pro.................................................26
Programming with SIMPL Windows........................................................................27
Example Program......................................................................................................28
Uploading and Upgrading........................................................................................................29
Establishing Communication.....................................................................................29
Programs and Firmware ............................................................................................29
Operation.................................................................................................................................31
Button Types .............................................................................................................31
IR Receiver................................................................................................................33
Occupancy Sensing ...................................................................................................34
Problem Solving ......................................................................................................................37
Troubleshooting.........................................................................................................37
Check Network Wiring..............................................................................................37
Reference Documents................................................................................................38
Further Inquiries........................................................................................................38
Future Updates ..........................................................................................................39
Appendix A: Supported Devices .............................................................................................40
Keypads.....................................................................................................................40
Shade Controllers......................................................................................................40
Appendix B: Console Commands............................................................................................41
Appendix C: Factory Default Values.......................................................................................45
Appendix D: Button Functions................................................................................................46
Software License Agreement...................................................................................................53
Return and Warranty Policies..................................................................................................55
Merchandise Returns / Repair Service ......................................................................55
CRESTRON Limited Warranty.................................................................................55
Operations Guide - DOC. 6347B Contents •i

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux™Lighting System
iLux™ Lighting System:
CLS/CLSI-C6 & CLS/CLSI-C6M
Introduction
Features and Functions
• Wall-mounted integrated lighting and shade control
• Six channels of dimming or switching
• Six groups of shade or drape control
• Linkable for up to 54 lighting channels and 54 shade groups
• Up to 16 user-settable scenes | Large ON and OFF buttons
• Seven configurable “rocker” buttons with customizable label strip
• Flip-up front cover reveals setup controls and programming port
• Six bargraphs show lighting levels and shade positions
• Easy setup from front panel or iLux Designer software
• Built-in motion detector (CLS/CLSI-C6M) | Optional IR remote
• Supports multipoint control using up to 16 keypads
• Master air-gap relay | 230V AC version available
• Integrates with 2-Series control systems via Cresnet
• Available in almond, black, or white
Six Channel Dimming
The CLS-C6 features six channels of dimming for incandescent, magnetic low-
voltage, neon/cold cathode, and two-wire dimmable fluorescent loads. Each channel
can also support switching of many non-dimmable lighting loads. Each channel will
handle up to 800 watts individually, with a total rating for the complete unit of 1920
watts at 120 VAC for CLS-C6/C6M (2300 watts at 230 VAC for CLSI-C6/C6M).
Operations Guide - DOC. 6347B iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M •1

iLux™Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
Six Group Shade Control
Using Crestron’s networked shade and drape controllers (sold separately), the
CLS-C6 enables versatile control of a roomful of motorized window treatments,
screens, and lifts in up to six shade groups. Each controller is connected to the
CLS-C6 via the four-wire Cresnet bus.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of control
and customization to suit each unique room application. Large ON and OFF buttons
provide instant access to the “On” and “All Off” scenes, while the six main buttons
can be set up to recall additional scene presets, adjust shades, or perform a host of
other functions. The buttons' “rocker” action enables intuitive control for adjusting
lighting levels and shade positions. An additional "Up/Down” button is configurable
for a variety of functions, including use as a master lighting or shade control, or as a
"shift" button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade elegantly
to their new settings. The selected scene is indicated by a white LED beside each
button, and the customizable label strip allows each button to be clearly labeled
using Crestron Engraver software. Dimming levels and shade positions are displayed
graphically on six green LED bargraphs accessible behind the flip-up front cover.
Additional controls and a numeric display hidden beneath the cover enable setup
without requiring a PC. Enhanced customization is provided via the PC
programming port using iLux Designer software.
Built-in Motion Detector (CLS/CLSI-C6M)
The CLS/CLSI-C6M model provides the addition of a built-in infrared motion
detector, enabling automated control based on room occupancy. Lights can be
programmed to turn on and shades open automatically when someone enters the
room, or turn off and close when the room is left empty. Remote motion detectors
are also available to expand the coverage of the CLS/CLSI-C6M, or add occupancy
sensing capability to the CLS-C6 units.
IR Remote Control
The CLS-C6 units are equipped with an onboard IR receiver to allow for wireless
remote control using Crestron’s optional infrared remote control (sold separately).
Multipoint Keypad Control
Up to 16 Crestron keypads (sold separately) may be connected to a single CLS-C6,
providing versatile multipoint control for rooms with several entrances or work
areas.
Multi-Unit Expansion
A single CLS-C6 master will support up to eight additional CLS-C6s, enabling
systems of up to 54 lighting channels and 54 shade groups. Scene recall, master
dimming, and occupancy status are shared between all the CLS-C6 units. Each
individual unit can still support a complete assortment of local devices including
keypads, shade controllers, and sensors.
•iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M Operations Guide - DOC. 6347B
2

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux™Lighting System
Control System Integration
The CLS-C6 actually features two separate Cresnetcontrol networks, one for local
devices and one for connection to a 2-Series control system.
Connecting the CLS-C6 to a control system allows its functions to be controlled
from touchpanels, RF wireless remotes, and even computers, supporting extensive
flexibility for remote control and integration with other devices and systems.
Additional functions such as on-the-fly room combining and activating operations
based on a real-time clock are also made possible by connecting the CLS-C6 to a
control system.
Connecting to an Ethernet-networked control system provides a gateway to larger
applications such as integration with facility-wide lighting, HVAC, security, and
remote monitoring via Crestron RoomView®Help Desk software as well as third-
party SNMP software.
Operations Guide - DOC. 6347B iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M •3

iLux™Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
Specifications
The following table provides specifications for the CLS-C6.
CLS-C6 Specifications
SPECIFICATION DETAILS
Load Ratings
CLS-C6/C6M
Max load per channel :
Min load per channel
Max load per unit:
CLSI-C6/C6M
Max load per channel :
Min load per channel
Max load per unit:
800 W/VA (6.7 Amps @ 120 VAC)
15 W/VA (0.125 Amps @ 120 VAC)
1920 W/VA (16 Amps @ 120 VAC)
800 W/VA (3.5 Amps @ 230 VAC)
25 W/VA (0.108 Amps @ 230 VAC)
2300 W/VA (10 Amps @ 230 VAC)
Power Requirements CLS-C6 Line Power, 100 –127 VAC, 50 / 60Hz
CLSI-C6 Line Power, 220 – 240 VAC, 50 / 60Hz
Default Net ID 1F
Control System Update Files1, 2
Minimum 2-Series Control
System
Version 2.004.CUZ or later
Load Types Incandescent, magnetic low voltage, neon/cold
cathode, dimmable 2-wire fluorescent, and non-dim
lighting (also: electronic low voltage, 3-wire and
4-wire fluorescent3)
IR Receiver
Reception Frequency 36 kHz
Requires Crestron IR remote (sold separately).
Motion Detector
(CLS/CLSI-C6M only
Type
Range
Infrared
20 to 30 feet at 4-foot elevation
(6 to 9 meters at 1.2 meter elevation)
Firmware clsi-c6_clsi-c6m_1.01.02.upg or later
Environmental Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Overall Dimensions:
Height
Width
Depth
4.48 in (11.38 cm)
8.89 in (22.58 cm)
2.46 in (6.25 cm) for CLS/CLSI-C6
2.59 in (6.58 cm) for CLS/CLSI-C6M
Weight 1.43 lbs (0.65 kg)
1. The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3. These loads require an optional booster module. The modules are LEPB-n, where ‘n’ is a number based
on the desired load type. Also, some boosters permit control of 277VAC loads. Refer to the Crestron
website for details on power boosters.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may
be required to register to obtain access to certain areas of the site (including the FTP site).
Physical Description
All controls and indicators for the CLS-C6 are located on the front of the unit. The
front panel also contains a mini phone jack, under the flip-up cover, used for
programming functions, and an IR port for control via an IR remote device. All other
•iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M Operations Guide - DOC. 6347B
4

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux™Lighting System
ports and connectors are located on the rear panel. Refer to the table “Connectors,
Controls, & Indicators” on page 6 for details.
CLS-C6 (Cover Open)
CLS-C6/C6M Overall Dimensions
Operations Guide - DOC. 6347B iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M •5

iLux™Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
CLS-C6/CLS-C6M Front Panel
CLS-C6/CLS-C6M Rear Panel
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
1 Bargraphs In Standard mode and Lights mode, the bargraphs,
each a series of seven LEDs, indicate the current
light intensity for the six lighting loads. In Shades
mode, they indicate the shade position for each of
the shade groups. The bargraphs have other
functions in Setup mode.
2 Label Strip Customizable label for the six scenes.
3 Function Buttons and LEDs In Standard mode, these buttons are typically used
to select/recall scenes. In Lights mode, they are
used to make temporary adjustments to the six
lighting loads. In Shades mode they are used to
make temporary adjustments to the shade groups.
They can also be programmed to perform other
functions.
4 IR Detector The IR detector responds to commands from the
optional Crestron remote control. The remote
control can be used to recall Scenes 1 – 4, the On
and Off scenes, and perform master raise and lower
of the lighting loads.
Continued on next page
•iLux™Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M Operations Guide - DOC. 6347B
6