CREVIS GT-4 Series User manual

1FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
GT-4xxx
Analog Output Module
User Manual

2FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
DOCUMENT CHANGE SUMMARY
REV
PAGE
REMARKS
DATE
EDITOR
1.00
New Document
18/07/30
JY,Hyun
1.01
Add Product
GT-4154, GT-4158,
19/01/16
JY,Hyun
1.02
Add Product
GT-4214, GT-4254, GT-4218, GT-4258
20/08/19
JY,Hyun

3FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
Table of Contents
1. Important Notes ........................................................................................................................6
1.1. Safety Instruction...............................................................................................................7
1.1.1. Symbols........................................................................................................................7
1.1.2. Safety Notes .................................................................................................................7
1.1.3. Certification..................................................................................................................7
2. Analog Output Module List ......................................................................................................8
3. Specification..............................................................................................................................9
3.1. GT-4114...............................................................................................................................9
3.1.1. Wiring Diagram ............................................................................................................9
3.1.2. LED Indicator..............................................................................................................10
3.1.3. Channel Status LED...................................................................................................10
3.1.4. Environment Specification........................................................................................11
3.1.5. Specification...............................................................................................................12
3.1.6. Data Value / Current...................................................................................................13
3.1.7. Mapping Data into the Image Table. .........................................................................14
3.1.8. Parameter Data...........................................................................................................14
3.2. GT-4154.............................................................................................................................15
3.2.1. Wiring Diagram ..........................................................................................................15
3.2.2. LED Indicator..............................................................................................................16
3.2.3. Channel Status LED...................................................................................................16
3.2.4. Environment Specification........................................................................................17
3.2.5. Specification...............................................................................................................18
3.2.6. Data Value / Current...................................................................................................19
3.2.7. Mapping Data into the Image Table. .........................................................................20
3.2.8. Parameter Data...........................................................................................................20
3.3. GT-4118.............................................................................................................................21
3.3.1. Wiring Diagram ..........................................................................................................21
3.3.2. LED Indicator..............................................................................................................22
3.3.3. Channel Status LED...................................................................................................22
3.3.4. Environment Specification........................................................................................23
3.3.5. Specification...............................................................................................................24

4FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.3.6. Data Value / Current...................................................................................................25
3.3.7. Mapping Data into the Image Table. .........................................................................26
3.3.8. Parameter Data...........................................................................................................27
3.4. GT-4158.............................................................................................................................28
3.4.1. Wiring Diagram ..........................................................................................................28
3.4.2. LED Indicator..............................................................................................................29
3.4.3. Channel Status LED...................................................................................................29
3.4.4. Environment Specification........................................................................................30
3.4.5. Specification...............................................................................................................31
3.4.6. Data Value / Current...................................................................................................32
3.4.7. Mapping Data into the Image Table. .........................................................................33
3.4.8. Parameter Data...........................................................................................................34
3.5. GT-4214.............................................................................................................................35
3.5.1. Wiring Diagram ..........................................................................................................35
3.5.2. LED Indicator..............................................................................................................36
3.5.3. Channel Status LED...................................................................................................36
3.5.4. Environment Specification........................................................................................37
3.5.5. Specification...............................................................................................................38
3.5.6. Data Value / Current...................................................................................................39
3.5.7. Mapping Data into the Image Table. .........................................................................40
3.5.8. Parameter Data...........................................................................................................40
3.6. GT-4254.............................................................................................................................41
3.6.1. Wiring Diagram ..........................................................................................................41
3.6.2. LED Indicator..............................................................................................................42
3.6.3. Channel Status LED...................................................................................................42
3.6.4. Environment Specification........................................................................................43
3.6.5. Specification...............................................................................................................44
3.6.6. Data Value / Current...................................................................................................45
3.6.7. Mapping Data into the Image Table. .........................................................................46
3.6.8. Parameter Data...........................................................................................................46
3.7. GT-4218.............................................................................................................................47
3.7.1. Wiring Diagram ..........................................................................................................47

5FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.7.2. LED Indicator..............................................................................................................48
3.7.3. Channel Status LED...................................................................................................48
3.7.4. Environment Specification........................................................................................49
3.7.5. Specification...............................................................................................................50
3.7.6. Data Value / Current...................................................................................................51
3.7.7. Mapping Data into the Image Table. .........................................................................52
3.7.8. Parameter Data...........................................................................................................53
3.8. GT-4258.............................................................................................................................54
3.8.1. Wiring Diagram ..........................................................................................................54
3.8.2. LED Indicator..............................................................................................................55
3.8.3. Channel Status LED...................................................................................................55
3.8.4. Environment Specification........................................................................................56
3.8.5. Specification...............................................................................................................57
3.8.6. Data Value / Current...................................................................................................58
3.8.7. Mapping Data into the Image Table. .........................................................................59
3.8.8. Parameter Data...........................................................................................................60
4. Dimension ...............................................................................................................................61
4.1. GT-4xx4(RTB) ...................................................................................................................61
5. Mounting..................................................................................................................................62
5.1. I/O Inserting and Removing Devices...............................................................................62
5.2. RTB (Removable Terminal Block) ...................................................................................63
6. G-Bus Pin Description............................................................................................................64

6FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
1. Important Notes
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls describes some
important differences between solid state equipment and hard-wired electromechanical devices.
Because of this difference, and also because of the wide variety of uses for solid state equipment, all
persons responsible for applying this equipment must satisfy themselves that each intended application of
this equipment is acceptable.
In no event will CREVIS be responsible or liable for indirect or consequential damages resulting from the use
or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular installation, CREVIS cannot assume responsibility
or liability for actual use based on the examples and diagrams.
✓If you don't follow the directions, it could cause a personal injury, damage to the equipment or
explosion
⚫Do not assemble the products and wire with power applied to the system. Else it may cause an electric
arc, which can result into unexpected and potentially dangerous action by field devices. Arching is
explosion risk in hazardous locations. Be sure that the area is non-hazardous or remove system power
appropriately before assembling or wiring the modules.
⚫Do not touch any terminal blocks or IO modules when system is running. Else it may cause the unit to
an electric shock or malfunction.
⚫Keep away from the strange metallic materials not related to the unit and wiring works should be
controlled by the electric expert engineer. Else it may cause the unit to a fire, electric shock or
malfunction
✓If you disobey the instructions, there may be possibility of personal injury, damage to equipment
or explosion. Please follow below Instructions.
"Check the rated voltage and terminal array before wiring. Avoid the circumstances over 50℃of
temperature. Avoid placing it directly in the sunlight.
"Avoid the place under circumstances over 85% of humidity.
"Do not place Modules near by the inflammable material. Else it may cause a fire.
"Do not permit any vibration approaching it directly.
"Go through module specification carefully, ensure inputs, output connections are made with the
specifications. Use standard cables for wiring.
"Use Product under pollution degree 2 environment.
Warning!
Caution!

7FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
1.1. Safety Instruction
1.1.1. Symbols
1.1.2. Safety Notes
The modules are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the modules, ensure that the environment (persons,
workplace and packing) is well grounded. Avoid touching conductive components, GBUS
Pin.
1.1.3. Certification
c-UL-us UL Listed Industrial Control Equipment, certified for U.S. and Canada
See UL File E235505
CE Certificate
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
Reach, RoHS (EU, CHINA)
Identifies information about practices or circumstances that can cause an
explosion in a hazardous environment, which may lead to personal injury or
death property damage, or economic loss
Identifies information that is critical for successful application and understanding of the
product
Identifies information about practices or circumstances that can lead to personal
injury, property damage, or economic loss.
Attentions help you to identity a hazard, avoid a hazard, and recognize the
consequences

8FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
2. Analog Input Module List
GT-Number
Description
ID
GT-4114
Analog Output 4 Channels, Current Output, 0~20mA, 12Bits
4114
GT-4154
Analog Output 4 Channels, Current Output, 0~20mA, 16Bits
4154
GT-4118
Analog Output 8 Channels, Current Output, 0~20mA, 12Bits
4118
GT-4158
Analog Output 8 Channels, Current Output, 0~20mA, 16Bits
4158
GT-4214
Analog Output 4 Channels, Current Output, 4~20mA, 12Bits
4214
GT-4254
Analog Output 4 Channels, Current Output, 4~20mA, 16Bits
4254
GT-4218
Analog Output 8 Channels, Current Output, 4~20mA, 12Bits
4218
GT-4258
Analog Output 8 Channels, Current Output, 4~20mA, 16Bits
4258

9FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3. Specification
3.1. GT-4114
3.1.1. Wiring Diagram
Pin No.
Signal Description
Signal Description
Pin No.
0
Analog Output Channel 0
Analog Output Channel 1
1
2
Analog Output Channel 2
Analog Output Channel 3
3
4
Output Channel Common(AGND)
Output Channel Common(AGND)
5
6
Output Channel Common(AGND)
Output Channel Common(AGND)
7
8
F.G
F.G
9

10 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.2. LED Indicator
3.1.3. Channel Status LED
LED No.
LED Function / Description
LED Color
0
Output Channel 0
Green
1
Output Channel 1
Green
2
Output Channel 2
Green
3
Output Channel 3
Green
Status
LED
To indicate
Normal Operation
Off
No Output Value
Green
Normal Operation
Field Power Error
All Channel Repeat Green and Off
Field Power is unconnected.

11 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.4. Environment Specification
Environmental Specification
Operation Tmperature
-40℃~ 70℃
UL Temperature
-20℃~60℃
Storage Temperature
-40℃~85℃
Relative Humidity
5％~ 90％Non-condensing
Mounting
DIN Rail
General Specification
Shock Operating
IEC 60068-2-27 : 2008 / 15g, 11ms
Vibration Resistance
Based on IEC 60068-2-6
DNVGL-CG-0039 : Vibration Class B, 4g
Industrial Emissions
EN 61000-6-4/ All : 2011
Industrial Immunity
EN 61000-6-2 : 2005
Installation Position
Verical and horizontal installation is available
Product Cerifications
CE, UL, FCC

12 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.5. Specification
Items
Specification
Output Specification
Outputs Per Module
4 Channels Single Ended, Non-Isolated Between Channel
Indicators(Logic side)
4 Green Output Status
Resolution in Ranges
12 Bits : 4.88uA/Bit
Output Range
0~20mA
Data Format
16 Bits Integer (2' compliment)
Module Error
±0.1% Full Scale @ 25℃
±0.3% Full Scale @ -40℃, 70℃
Load Resistance
Max. 250Ω*
Diagnostic
Field Power Off : LED Blinking
Field Power On : No Output LED Off
Field Power On : Output LED ON
Conversion Time
0.15msec / All Channel
Calibration
Not Required
Common Type
4 Channels / 4 Common
General Specification
Power Dissipation
Max. 30mA @ 5.0Vdc
Isolation
I/O to Logic : Photocoupler Isolation
Field Power : Non-Isolation
UL Field Power
Supply Voltage : 24Vdc nominal, Class 2
Field Power
Supply Voltage : 24Vdc nominal
Voltage Range* : 18~30Vdc
Power Dissipation : Max. 80mA @ 24Vdc
Wiring
I/O Cable Max. 2.0mm2(AWG 14)
Torque
0.8Nm(7lb-in)
Weight
58g
Module Size
12mm x 99mm x 70mm
Environment Condition
Refer to ‘Environment Specification'
* Operating temperature
- 40 ~ 70℃temperature range specification can be guaranteed under the following conditions.
- Load Resistance: Min 100Ω, Max 250Ω
- Field Power Voltage Range: Max 26.4V
- Otherwise, temperature specification can be guaranteed with -40 ~ 60℃

13 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.6. Data Value / Current
Current Range : 0~20mA
Current
0.0mA
5.0mA
10.0mA
20.0mA
Data(Hex)
H0000
H03FF
H07FF
H0FFF

14 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.7. Mapping Data form the Image Table.
-. Output Image Value
-. Output Module Data - 8byte Output Data
3.1.8. Parameter Data
-. Valid Parameter length : 4 Bytes
-. Parameter Data
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Fault Action for
Channel 3
Fault Action for
Channel 2
Fault Action for
Channel 1
Fault Action for
Channel 0
00 : Fault Value 01 : Hold last state 10 : Low Limit 11 : high Limit
Byte 1
Not used
Byte 2
Fault Value Low Byte
Byte 3
Not used
Fault Value high Byte
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Analog Output Ch0 Low byte
Byte 1
Analog Output Ch0 High byte
Byte 2
Analog Output Ch1 Low byte
Byte 3
Analog Output Ch1 High byte
Byte 4
Analog Output Ch2 Low byte
Byte 5
Analog Output Ch2 High byte
Byte 6
Analog Output Ch3 Low byte
Byte 7
Analog Output Ch3 High byte
Analog Input Ch0
Analog Input Ch1
Analog Input Ch2
Analog Input Ch3

15 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2. GT-4154
3.2.1. Wiring Diagram
Pin No.
Signal Description
Signal Description
Pin No.
0
Analog Output Channel 0
Analog Output Channel 1
1
2
Analog Output Channel 2
Analog Output Channel 3
3
4
Output Channel Common(AGND)
Output Channel Common(AGND)
5
6
Output Channel Common(AGND)
Output Channel Common(AGND)
7
8
F.G
F.G
9

16 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.2. LED Indicator
3.2.3. Channel Status LED
LED No.
LED Function / Description
LED Color
0
Output Channel 0
Green
1
Output Channel 1
Green
2
Output Channel 2
Green
3
Output Channel 3
Green
Status
LED
To indicate
Normal Operation
Off
No Output Value
Green
Normal Operation
Field Power Error
All Channel Repeat Green and Off
Field Power is unconnected.

17 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.4. Environment Specification
Environmental Specification
Operation Tmperature
-40℃~ 70℃
UL Temperature
-20℃~60℃
Storage Temperature
-40℃~85℃
Relative Humidity
5％~ 90％Non-condensing
Mounting
DIN Rail
General Specification
Shock Operating
IEC 60068-2-27 : 2008 / 15g, 11ms
Vibration Resistance
Based on IEC 60068-2-6
DNVGL-CG-0039 : Vibration Class B, 4g
Industrial Emissions
EN 61000-6-4/ All : 2011
Industrial Immunity
EN 61000-6-2 : 2005
Installation Position
Verical and horizontal installation is available
Product Cerifications
CE, UL, FCC

18 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.5. Specification
Items
Specification
Output Specification
Outputs Per Module
4 Channels Single Ended, Non-Isolated Between Channel
Indicators(Logic side)
4 Green Output Status
Resolution in Ranges
16bit (Include Sign)
15bits : 0.61uA/bit
Output Range
0~20mA
Data Format
16 Bits Integer (2's compliment)
Module Error
±0.1% Full Scale @ 25℃
±0.3% Full Scale @ -40℃, 70℃
Load Resistance
Max. 250Ω*
Diagnostic
Field Power Off : LED Blinking
Field Power On : No Output LED Off
Field Power On : Output LED ON
Conversion Time
0.15msec / All Channel
Calibration
Not Required
Common Type
4 Channels / 4 Common
General Specification
Power Dissipation
Max. 30mA @ 5.0Vdc
Isolation
I/O to Logic : Photocoupler Isolation
Field Power : Non-Isolation
UL Field Power
Supply Voltage : 24Vdc nominal, Class 2
Field Power
Supply Voltage : 24Vdc nominal
Voltage Range* : 18~30Vdc
Power Dissipation : Max. 80mA @ 24Vdc
Wiring
I/O Cable Max. 2.0mm2(AWG 14)
Torque
0.8Nm(7lb-in)
Weight
58g
Module Size
12mm x 99mm x 70mm
Environment Condition
Refer to ‘Environment Specification'
* Operating temperature
- 40 ~ 70℃temperature range specification can be guaranteed under the following conditions.
- Load Resistance: Min 100Ω, Max 250Ω
- Field Power Voltage Range: Max 26.4V
- Otherwise, temperature specification can be guaranteed with -40 ~ 60℃

19 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.6. Data Value / Current
Current Range : 0~20mA
Current
0.0mA
5.0mA
10.0mA
20.0mA
Data(Hex)
H0000
H2000
H4000
H7FFF

20 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.7. Mapping Data form the Image Table.
-. Output Image Value
-. Output Module Data - 8byte Output Data
3.2.8. Parameter Data
-. Valid Parameter length : 4 Bytes
-. Parameter Data
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Fault Action for
Channel 3
Fault Action for
Channel 2
Fault Action for
Channel 1
Fault Action for
Channel 0
00 : Fault Value 01 : Hold last state 10 : Low Limit 11 : high Limit
Byte 1
Not used
Byte 2
Fault Value Low Byte
Byte 3
Fault Value high Byte
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Analog Output Ch0 Low byte
Byte 1
Analog Output Ch0 High byte
Byte 2
Analog Output Ch1 Low byte
Byte 3
Analog Output Ch1 High byte
Byte 4
Analog Output Ch2 Low byte
Byte 5
Analog Output Ch2 High byte
Byte 6
Analog Output Ch3 Low byte
Byte 7
Analog Output Ch3 High byte
Analog Input Ch0
Analog Input Ch1
Analog Input Ch2
Analog Input Ch3