CREVIS GT-4 Series User manual

1FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
Version 1.0
2018 CREVIS Co.,Ltd
GT-4xxx
Analog Output Module
User Manual

2FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
DOCUMENT CHANGE SUMMARY
REV
PAGE
REMARKS
DATE
EDITOR
1.0
New Document
18/07/30
JY,Hyun
1.1
Add Product
GT-4154, GT-4158, GT-4424, GT-4464,
GT-4468, GT-442F
19/01/16
JY,Hyun

3FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
Table of Contents
1. Important Notes............................................................................................................................5
1.1. Safety Instruction.................................................................................................................. 6
1.1.1. Symbols........................................................................................................................... 6
1.1.2. Safety Notes.................................................................................................................... 6
1.1.3. Certification..................................................................................................................... 6
2. Analog Input Module List............................................................................................................ 7
3. Specification.................................................................................................................................8
3.1. GT-4114...................................................................................................................................8
3.1.1. Wiring Diagram............................................................................................................... 8
3.1.2. LED Indicator...................................................................................................................9
3.1.3. Channel Status LED....................................................................................................... 9
3.1.4. Environment Specification.......................................................................................... 10
3.1.5. Specification..................................................................................................................11
3.1.6. Data Value / Current......................................................................................................12
3.1.7. Mapping Data into the Image Table.............................................................................12
3.1.8. Parameter Data............................................................................................................. 13
3.2. GT-4154.................................................................................................................................16
3.2.1. Wiring Diagram............................................................................................................. 16
3.2.2. LED Indicator.................................................................................................................17
3.2.3. Channel Status LED..................................................................................................... 17
3.2.4. Environment Specification.......................................................................................... 18
3.2.5. Specification..................................................................................................................19
3.2.6. Data Value / Current......................................................................................................20
3.2.7. Mapping Data into the Image Table.............................................................................20
3.2.8. Parameter Data............................................................................................................. 21
3.3. GT-4118.................................................................................................................................22
3.3.1. Wiring Diagram............................................................................................................. 22
3.3.2. LED Indicator.................................................................................................................23
3.3.3. Channel Status LED..................................................................................................... 23

4FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.3.4. Environment Specification.......................................................................................... 24
3.3.5. Specification..................................................................................................................25
3.3.6. Data Value / Current......................................................................................................25
3.3.7. Mapping Data into the Image Table.............................................................................26
3.3.8. Parameter Data............................................................................................................. 26
3.4. GT-4158.................................................................................................................................27
3.4.1. Wiring Diagram............................................................................................................. 27
3.4.2. LED Indicator.................................................................................................................28
3.4.3. Channel Status LED..................................................................................................... 28
3.4.4. Environment Specification.......................................................................................... 29
3.4.5. Specification..................................................................................................................30
3.4.6. Data Value / Current......................................................................................................31
3.4.7. Mapping Data into the Image Table.............................................................................32
3.4.8. Parameter Data............................................................................................................. 33
3.5. GT-4424.................................................................................................................................34
3.5.1. Wiring Diagram............................................................................................................. 34
3.5.2. LED Indicator.................................................................................................................35
3.5.3. Channel Status LED..................................................................................................... 35
3.5.4. Environment Specification.......................................................................................... 36
3.5.5. Specification..................................................................................................................37
3.5.6. Data Value / Current......................................................................................................38
3.5.7. Mapping Data into the Image Table.............................................................................38
3.5.8. Parameter Data............................................................................................................. 39
3.6. GT-4464.................................................................................................................................40
3.6.1. Wiring Diagram............................................................................................................. 40
3.6.2. LED Indicator.................................................................................................................41
3.6.3. Channel Status LED..................................................................................................... 41
3.6.4. Environment Specification.......................................................................................... 42
3.6.5. Specification..................................................................................................................43
3.6.6. Data Value / Current......................................................................................................44
3.6.7. Mapping Data into the Image Table.............................................................................44
3.6.8. Parameter Data............................................................................................................. 45

5FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.7. GT-4428.................................................................................................................................46
3.7.1. Wiring Diagram............................................................................................................. 46
3.7.2. LED Indicator.................................................................................................................47
3.7.3. Channel Status LED..................................................................................................... 47
3.7.4. Environment Specification.......................................................................................... 48
3.7.5. Specification..................................................................................................................49
3.7.6. Data Value / Voltage...................................................................................................... 49
3.7.7. Mapping Data into the Image Table............................................................................ 50
3.7.8. Parameter Data............................................................................................................. 50
3.8. GT-4468.................................................................................................................................51
3.8.1. Wiring Diagram............................................................................................................. 51
3.8.2. LED Indicator.................................................................................................................52
3.8.3. Channel Status LED..................................................................................................... 52
3.8.4. Environment Specification.......................................................................................... 53
3.8.5. Specification..................................................................................................................54
3.8.6. Data Value / Current......................................................................................................55
3.8.7. Mapping Data into the Image Table.............................................................................56
3.8.8. Parameter Data............................................................................................................. 57
3.9. GT-442F................................................................................................................................ 58
3.9.1. Wiring Diagram............................................................................................................. 58
3.9.2. LED Indicator.................................................................................................................59
3.9.3. Channel Status LED..................................................................................................... 59
3.9.4. Environment Specification.......................................................................................... 60
3.9.5. Specification..................................................................................................................61
3.9.6. Data Value / Current......................................................................................................62
3.9.7. Mapping Data into the Image Table.............................................................................62
3.9.8. Parameter Data............................................................................................................. 63
4. Dimension...................................................................................................................................64
4.1. GT-4xx4, GT-4xx8(RTB).......................................................................................................64
4.2. GT-4xxF(RTB).......................................................................................................................65
5. Mounting..................................................................................................................................... 66
5.1. I/O Inserting and Removing Devices................................................................................. 66

6FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
5.2. RTB (Removable Terminal Block)...................................................................................... 67
6. G-Bus Pin Description............................................................................................................... 68

7FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
1. Important Notes
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls describes some
important differences between solid state equipment and hard-wired electromechanical devices.
Because of this difference, and also because of the wide variety of uses for solid state equipment,all
persons responsible for applying this equipment must satisfy themselves that each intendedapplication of
this equipment is acceptable.
In no event will CREVIS be responsible or liable for indirect or consequential damages resulting from the use
or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the
many variables and requirements associated with any particular installation, CREVIS cannot assume
responsibility or liability for actual use based on the examples and diagrams.
If you don't follow the directions, it could cause a personal injury, damage to the equipment or
explosion
Do not assemble the products and wire with power applied to the system. Else it may cause an electric
arc, which can result into unexpected and potentially dangerous action by field devices. Arching is
explosion risk in hazardous locations. Be sure that the area is non-hazardous or remove system power
appropriatelybefore assembling or wiring the modules.
Do not touch any terminalblocks or IO modules when system is running. Else it may cause the unit to
an electric shock or malfunction.
Keep away from the strange metallic materials not related to the unit and wiring works should be
controlled by the electric expert engineer. Else it may cause the unit to a fire, electric shock or
malfunction

If you disobey the instructions, there may be possibility of personal injury, damage to equipment
or explosion. Please follow below Instructions.
•Check the rated voltage and terminal array before wiring. Avoid the circumstances over 50℃of
temperature. Avoid placing it directly in the sunlight.
•Avoid the place under circumstances over 85% of humidity.
•Do not place Modules near by the inflammablematerial. Else it may cause a fire.
•Do not permit any vibration approachingit directly.
Warning!
Caution!

8FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
•Go through module specification carefully, ensure inputs, output connections are made with the
specifications. Use standard cables for wiring.
•Use Product under pollution degree 2 environment.
1.1. Safety Instruction
1.1.1. Symbols
1.1.2. Safety Notes
The modules are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the modules, ensure that the environment(persons,
workplace and packing) is well grounded. Avoid touching conductive components, GBUS
Pin.
1.1.3. Certification
c-UL-us UL Listed Industrial Control Equipment, certified for U.S. and Canada
See UL File E235505
CE Certificate
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
Reach, RoHS (EU, CHINA)
Identifies information about practices or circumstances that can cause an
explosion in a hazardous environment, which may lead to personal injury or
death property damage, or economic loss
Identifies information that is critical for successful application and understanding of the
product
Identifies information about practices or circumstances that can lead to personal
injury, property damage,or economic loss.
Attentions help you to identity a hazard, avoid a hazard, and recognize the
consequences

9FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
2. Analog Input Module List
GT-Number
Description
ID
Production
Status
GT-4114
Analog Output, 4 Channels, 0~20mA, 12Bits, 10RTB
4114
Active
GT-4154
Analog Output, 4 Channels, 0~20mA, 16Bits, 10RTB
4154
Active
GT-4118
Analog Output, 4 Channels, 0~20mA, 12Bits, 10RTB
4118
Active
GT-4458
Analog Output, 4 Channels, 0~20mA, 16Bits, 10RTB
4158
Active
GT-4424
Analog Output, 4 Channels, 0~10Vdc, 12Bits, 10RTB
4424
Active
GT-4464
Analog Output, 4 Channels, 0~10Vdc, 16Bits, 10RTB
4464
Active
GT-4428
Analog Output, 8 Channels, 0~10Vdc, 12Bits, 10RTB
4428
Active
GT-4468
Analog Output, 8 Channels, 0~10Vdc, 16Bits, 10RTB
4468
Active
GT-442F
Analog Output, 16 Channels, 0~10Vdc, 12Bits, 20P Connector
442F
Active

10 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3. Specification
3.1. GT-4114
3.1.1. Wiring Diagram
Pin No.
Signal Description
Signal Description
Pin No.
0
Input Channel 0
Input Channel 1
1
2
Input Channel 2
Input Channel 3
3
4
Output Channel Common(AGND)
Output Channel Common(AGND)
5
6
Output Channel Common(AGND)
Output Channel Common(AGND)
7
8
Field Ground
Field Ground
9

11 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.2. LED Indicator
3.1.3. Channel Status LED
LED No.
LED Function / Description
LED Color
0
Input Channel 0
Green
1
Input Channel 1
Green
2
Input Channel 2
Green
3
Input Channel 3
Green
Status
LED
To indicate
Nomal Operation
Off
No Output Value
Green
Normal Operation
Field Power Error
All Channel Repeat Green and
Off
Field Power is unconnected

12 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.4. Environment Specification
Environmental Specification
Operation Tmperature
-40℃~ 70℃
UL Temperature
-20℃~60℃
Storage Temperature
-40℃~85℃
Relative Humidity
5％~ 90％Non-condensing
Mounting
DIN Rail
General Specification
Shock Operating
IEC 60068-2-27
Cibration Resistance
Based on IEC 60068-2-6
Sine Vibration
- 5~25Hz : ±1.6mm
- 25 ~300 Hz : 4g
- Sweep Rate : 1 Oct/min, 20 Sweeps
Random Vibration
-10 ~ 40 Hz : 0.0125g²/Hz
- 40~100 Hz : 0.0125 ⇒0.002g²/Hz
- 100 ~ 500 Hz : 0.002g²/Hz
- 500 ~ 2000 Hz : 0.002 ⇒1.3 × 10 -⁴ g²/Hz
- Test Time : 1hrs for each test
EMC Resistance Burst/ESD
EN 61000-6-2 : 2005
EN 61000-6-4/ All : 2011
Protection Class
Variable/IP20
Installation Position
Verical and horizontal installation is available
Product Cerifications
CE, UL

13 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.5. Specification
* Operating temperature
-40~70℃temperature range specification can be guaranteed under the following conditions.
- Load Resistance : Min 100Ω, Max 250Ω
- Otherwise, temperature specification can be goranteed with -40~60℃
Items
Specification
Output Specification
Outputs Per Module
4 Channels Single Ended, Non-Isolated Between Channels
Indicators (Logic side)
4 Green Output Status LEDs
Resolution in Ranges
12 Bits : 4.88uA/bit
Output Range
0~20mA
Data Format
16bits Integer(2’s complement)
Module Error
±0.1％Full Scale @25℃ambient
±0.3％Full Scale @ -40℃,70℃
Load Impedance
Max. 250 Ω *
Diagnostic
Field Power Off : LED Blinking
Field Power On : No Output LED Off
Field Power On : Output LED ON
Conversion Time
Max. 150usec / All Channel
Field Calibration
Not Required
Common type
4 Channels / 4 Common
General Specification
Power Dissipation
Max. 30mA @5Vdc
Isolation
I/O to Logic : PhotocouplerIsolation
Field Power : Non-Isolation
Field Power
Supply Voltage : 24Vdc nominal
Voltage Range : 18~32Vdc
Power Dissipation : Max. 80mA @ 24Vdc
Wiring
I/O Cable Max. 2.0mm² (AWG14)
Weight
58g
Module Size
12mm x 99mm x 70mm
Environment Condition
Refer to ‘1. Environment Specification’

14 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.1.6. Data Value /Current
- Current Range : 0~20mA
3.1.7. Mapping Data into the Image Table.
-Output Image Value
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Analog Output Ch0 Low byte
Byte 1
Analog Output Ch0 High byte
Byte 2
Analog Output Ch1 Low byte
Byte 3
Analog Output Ch1 High byte
Byte 4
Analog Output Ch2 Low byte
Byte 5
Analog Output Ch2 High byte
Byte 6
Analog Output Ch3 Low byte
Byte 7
Analog Output Ch3 High byte
Current
0.0mA
5.0mA
10.0mA
20.0mA
Data(Hex)
H0000
H03FF
H07FF
H0FFF

15 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
- Output Module Data - 8byte Output Data
Analog Output Ch0
Analog Output Ch1
Analog Output Ch2
Analog Output Ch3
3.1.8. Parameter Date
- Valid Parameter length : 4Bytes
- Parameter Data
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Fault Action for
Channel 3
Fault Action for
Channel 2
Fault Action for
Channel 1
Fault Action for
Channel 0
00 : Fault Value / 01: Hold last state / 10 : Low Limit / 11: High Limit
Byte 1
Not used
Byte 2
Fault Value Low Byte
Byte 3
Not used
Fault Value High Byte

16 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2. GT-4154
3.2.1. Wiring Diagram
Pin No.
Signal Description
Signal Description
Pin No.
0
Output Channel 0
Output Channel 1
1
2
Output Channel 2
Output Channel 3
3
4
Output Channel Common(AGND)
Output Channel Common(AGND)
5
6
Output Channel Common(AGND)
Output Channel Common(AGND)
7
8
Field Ground
Field Ground
9

17 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.2. LED Indicator
3.2.3. Channel Status LED
LED No.
LED Function / Description
LED Color
0
Output Channel 0
Green
1
Output Channel 1
Green
2
Output Channel 2
Green
3
Output Channel 3
Green
Status
LED
To indicate
Nomal Operation
Off
No Output Value
Green
Normal Operation
Field Power Error
All Channel Repeat Green and
Off
Field Power is unconnected

18 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.4. Environment Specification
Environmental Specification
Operation Tmperature
-40℃~ 70℃
UL Temperature
-20℃~60℃
Storage Temperature
-40℃~85℃
Relative Humidity
5％~ 90％Non-condensing
Mounting
DIN Rail
General Specification
Shock Operating
IEC 60068-2-27
Cibration Resistance
Based on IEC 60068-2-6
Sine Vibration
- 5~25Hz : 1.6mm
- 25 ~300 Hz : 4g
- Sweep Rate : 1 Oct/min, 20 Cycles
Random Vibration
-10 ~ 40 Hz : 0.0125g²/Hz
- 40~100 Hz : 0.0125 ⇒0.002g²/Hz
- 100 ~ 500 Hz : 0.002g²/Hz
- 500 ~ 2000 Hz : 0.002 ⇒1.3 × 10 -⁴ g²/Hz
- Test Time : 1hrs for each test
EMC Resistance Burst/ESD
EN 61000-6-2 : 2005
EN 61000-6-4/ All : 2011
Protection Class
Variable/IP20
Installation Position
Verical and horizontal installation is available
Product Cerifications
CE, UL

19 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.5. Specification
* Operating temperature
-40~70℃temperature range specification can be guaranteed under the following conditions.
- Load Resistance : Min 100Ω, Max 250Ω
- Otherwise, temperature specification can be goranteed with -40~60℃
Items
Specification
Output Specification
Outputs Per Module
4 Channels Single Ended
Indicators (Logic side)
4 Green Output Status LEDs
Resolution in Ranges
16 Bits(Include Sign)
15 bits : 0.61uA/bit
Output Range
0~20mA
Data Format
16bits Integer(2’s complement)
Module Error
±0.1％Full Scale @25℃ambient
±0.3％Full Scale @ -40℃,70℃
Load Impedance
Max. 250 Ω *
Diagnostic
Field Power Off : LED Blinking
Field Power On : No Output LED Off
Field Power On : Output LED ON
Conversion Time
Max. 150usec / All Channel
Field Calibration
Not Required
Common type
4 Channels / 4 Common
General Specification
Power Dissipation
Max. 30mA @5Vdc
Isolation
I/O to Logic : PhotocouplerIsolation
Field Power : Non-Isolation
Field Power
Supply Voltage : 24Vdc nominal
Voltage Range : 18~32Vdc
Power Dissipation : Max. 80mA @ 24Vdc
Wiring
I/O Cable Max. 2.0mm² (AWG14)
Weight
58g
Module Size
12mm x 99mm x 70mm
Environment Condition
Refer to ‘Environment Specification’

20 FnIO G-Series
Copyright(C) CREVIS Co.,Ltd Support [phone] URL: www.crevis.co.kr
3.2.6. Data Value /Current
- Current Range : 0~20mA
3.2.7. Mapping Data into the Image Table.
-Output Image Value
Bit No
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Byte 0
Analog Output Ch0 Low byte
Byte 1
Analog Output Ch0 High byte
Byte 2
Analog Output Ch1 Low byte
Byte 3
Analog Output Ch1 High byte
Byte 4
Analog Output Ch2 Low byte
Byte 5
Analog Output Ch2 High byte
Byte 6
Analog Output Ch3 Low byte
Byte 7
Analog Output Ch3 High byte
Current
0.0mA
5.0mA
10.0mA
20.0mA
Data(Hex)
H0000
H2000
H4000
H7FFF