CREVIS FnIO SSeries Instruction manual

Page 1 FnIO S-Series
FnIO S – Series
NA-9287
Quick start manual
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 2 FnIO S-Series
DOC MENT CHANGE S MMARY
REV PAGE REMARKS DATE EDITOR
1New Document 2018. 10. 31. SJ Hwang
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 3 FnIO S-Series
CONTENTS
1. Node ID setting ….....................….......................................................... 4
1.1 Dip switch …..................................................................................... 4
2. TIA Portal V14 ….............................…................................................... 5
2.1 Import GSDML file …...................…............................................... 5
2.2 Hardware configuration setting ….................................................... 6
2.3 I/O test ….......................................................................................... 9
2.4 Change I/O parameter ….................................................................. 11
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 4 FnIO S-Series
1. Node ID setting
1.1 Dip switch
- You can set the Node ID with dip switch.
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 5 FnIO S-Series
2. TIA Portal V14
2.1 Import GSDML file
(1) Option → Manage general station description files (GSD)
(2) Check GSDML file → Install
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 6 FnIO S-Series
2.2 Hardware configuration setting
(1) Add new device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 7 FnIO S-Series
(2) Network view → Add NA-9287 → Connect
(3) Change module name → Add I/O modules → Check IEC V2.2 LLDP
- Module name : NA9287-XX(Node ID)
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 8 FnIO S-Series
(4) Download to device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 9 FnIO S-Series
2.3 I/O test
(1) Watch and force tables → Force table
(2) Create new force table → Check ‘F’ → Force all
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 10 FnIO S-Series
(3) Watch and force table → Watch table
(4) Create new watch table → Start monitoring
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 11 FnIO S-Series
2.4 Change I/O parameter
(1) Device view → Check module → General → Module parameters
(2) Download to device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr